dell inspiron 7500 User Manual
Here you can view all the pages of manual dell inspiron 7500 User Manual. The Dell manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 21
support.dell.comRemoving and Replacing Parts 13 Exploded View of 15-Inch XGA Display Assembly Figure 11. 15-Inch XGA Display Components 1LCD panel 5Hinges (2) 2CCFL cable 6Inverter board 3Carrier tray 7Front bezel 4Back cover
Page 22
14 Dell Inspiron 7500 — Removing and Replacing Parts Exploded View of 15-Inch SXGA+ Display Assembly Figure 12. 15-Inch SXGA+ Display Components 1LCD panel 5Back cover 2CCFL cable 6Hinges (2) 3Carrier tray 7Inverter board 4Display locking tab 8Front bezel
Page 23
support.dell.comRemoving and Replacing Parts 15 Exploded View of 15.4-Inch SXGA Display Assembly Figure 13. 15.4-Inch SXGA Display Components 1LCD panel 2CCFL cable 3Display locking tab
Page 24
16 Dell Inspiron 7500 — Removing and Replacing Parts Hard-Disk Drive Disassembly The hard-disk drive (see Figure 13) resides in a carrier that mounts in the hard-disk drive compartment in the bottom of the computer. Four screws secure the drive inside the carrier. Figure 14. Hard-Disk Drive Components To remove the hard-disk drive from the carrier, perform the following steps: 1. Remove the hard-disk drive assembly. See step 7 of Precautionar y Measures. 4Carrier tray 5Back cover 6Hinges (2) 7Inverter...
Page 25
support.dell.comRemoving and Replacing Parts 17 2. Remove the four 3-mm screws securing the hard-disk drive inside the carrier. 3. Remove the hard-disk drive from the carrier. Turn the carrier over with one hand and let the drive fall out of the carrier into your other hand. 4. Remove the metal carrier from the plastic cover. The metal carrier is held in the plastic cover by two tabs on each end. Carefully pr y the carrier away from the tabs. Pull the hard-disk drive connector off of the hard-disk...
Page 26
18 Dell Inspiron 7500 — Removing and Replacing Parts Figure 15. Combo Module Components To remove the CD-ROM drive or DVD-ROM drive (see Figure 14) from the plastic car- rier, perform the following steps: 1. Remove the combo module. 2. Remove the two 3-mm screws from the L-shaped bracket.13-mm screws (6) 2Bracket 3Flex cable connector 42.5-mm screws (2) 5Flex cable 6Plastic carrier 7Side mounting bracket 8CD-ROM or DVD-ROM drive
Page 27
support.dell.comRemoving and Replacing Parts 19 3. Remove the bracket. 4. Remove the two 3-mm screws from the side of the plastic carrier. 5. Remove the two 3-mm screws from the bottom of the plastic carrier. 6. Disconnect the flex cable from the CD-ROM/DVD-ROM drive connector. 7. Remove the CD-ROM/DVD-ROM drive from the plastic carrier. Turn the carrier over with one hand and let the drive fall out of the carrier into your other hand. To remove the side mounting bracket from the CD-ROM/DVD-ROM drive...
Page 28
20 Dell Inspiron 7500 — Removing and Replacing Parts To remove the diskette drive from the plastic carrier, perform the following steps: 1. Remove the two 3-mm screws from the top of the metal shielding carrier. 2. Remove the two 3-mm screws from the side of the plastic carrier. NOTICE: The metal on the shielding carrier is sharp. Be careful not to cut yourself. 3. Lift the metal shielding carrier out of the plastic carrier. Lift the back of the metal shielding carrier first and then slide it out. 4....
Page 29
support.dell.comRemoving and Replacing Parts 21 Keyboard Removal Figure 17. Keyboard Components To remove the keyboard (see Figure 16), perform the following steps: 1. Turn the computer over and remove the four 20-mm screws from the bottom of the computer. 2. Turn the computer back over and open the display.120-mm screws (4) 2Palmrest assembly 3ZIF connector 4Keyboard cable 5Keyboard
Page 30
22 Dell Inspiron 7500 — Removing and Replacing Parts 3. Insert a small flat-blade screwdriver or scribe along the right top of the keyboard, just above the row of function keys. Working from right to left, free the keyboard by pr ying it toward the front of the unit. When free, lift the top of the keyboard slightly to clear the palmrest assembly. 4. Slide the keyboard toward the display assembly to release the front edge of the keyboard from the palmrest assembly. 5. Rotate the bottom of the...