Dell In1930 Users Guide

							l Standard : Loads the monitors default color settings. This is the default preset mode.   
l Multimedia : Loads color settings ideal for multimedia applications.   
l Movie :   Loads color settings ideal for movies.   
l Game : Loads color settings ideal for most gaming applications.   
l Text :  Loads color settings ideal for office environment.   
l Warm : Increases the color temperature. The screen appears warmer with a red/yellow tint.   
l Cool : Decreases the color temperature. The screen appears cooler with a blue tint.   
l Custom Color : Allows you to manually adjust the color settings. Press the    and    keys to adjust the Red, Green, and Blue values 
and create your own preset color mode.   
 
    In the  Movie  preset mode:     
						

							  Hue
Allows you to adjust the skin tone of the image. Use   or   to adjust the hue from 0 to 100.
  Saturation
Allows you to adjust the color saturation of the image. Use   or   to adjust the saturation from 0 to 100.
  Demo Mode   You can launch the Demo Mode to identify the monitor display difference between Normal and Enhanced.   
 
Reset Color Settings   Resets your monitors color settings to the factory defaults.  
  DISPLAY  SETTINGS   Use the  Displays Settings  menu to adjust the monitors display settings.  
 
     
						

							 
Aspect Ratio   Adjusts the image ratio as Wide 16:9, 4:3, or 5:4.  
NOTE:  Wide 16:9 adjustment is not required at maximum preset resolution 1366 x 768 (for IN1930) or 1600 x 900 (for IN2030M) .
 
Horizontal Position    
Use the    or   buttons to adjust image left and right. Minimum is 0 ( - ). Maximum is 100 (+) .   
 
Vertical Position    
Use the    or   buttons to adjust image up and down. Minimum is 0 ( - ). Maximum is 100 (+).   
 
Sharpness    
This feature can make the image look sharper or softer. Use    or   to adjust the sharpness from 0 to 100.  
 
Pixel Clock    
The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference. Use    or   buttons to adjust for best image 
quality.  
 
Phase If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase (fine), again.
 
Dynamic Contrast Allows you to increase the level of contrast to provide sharper and more detailed image quality.   
NOTE:  Dynamic Contrast is not available (greyed out) in Energy Smart modes.   
 
Reset Display Settings   Select this option to restore default display settings.  
  OTHER SETTINGS   Select this option to adjust the settings of the OSD, such as, the languages of the OSD, the amount of time the menu remains on screen, and 
so on.   
						

							   
Language   Allows you to set the OSD display to one of six languages: English, Spanish, French, German, Simplified Chinese, or Japanese.
Menu Transparency   Allows you to adjust the OSD background from opaque to transparent.  
Menu Timer   Allows you to set the time for which the OSD remains active after you press a key on the monitor.  
Use the   and   keys to adjust the slider in 1 second increments, from 5 to 60 seconds.   
 
Menu Lock  
Controls user access to adjustments. When  Lock  is selected, no user adjustments are allowed. All keys are locked except 
NOTE:   When the OSD is locked, pressing the menu key takes you directly to the OSD settings menu, with OSD Lock pre
press and hold   key for 15 seconds to unlock and allow user access to all applicable settings.   
Energy Smart   Dynamic dimming activated (The Dynamic dimming feature automatically reduces the screen - brightness level when the displayed image 
contains a high proportion of bright areas).  
 
DDC/CI     DDC/CI (Display Data Channel/Command Interface) allows a software on your computer to adjust the monitor display settings like the 
brightness, color balance etc.  
Enable  (Default): Optimizes the performance of your monitor and provides a better customer experience.  
Disable : Disables the DDC/CI option and the following message appears on the screen.    
						

							 
 
 
LCD Conditioning   This feature will help reduce minor cases of image retention.  
 
If an image appears to be stuck on the monitor, select  LCD Conditioning  to help eliminate any image retention. Using the LCD Conditioning 
feature may take some time. LCD Conditioning feature cannot remove  severe cases of image retention or burn - in. 
The below warning message appears once user selects  “ Enable LCD Conditioning.   
 NOTE:  Use LCD Conditioning only when you experience a problem with image retention.     
						

							 
 
Factory Reset   Resets all OSD settings to the factory preset values .    
  Personalize   Select this option allows you to set two shortcut keys.   
 
   
 
Shortcut Key 1   User can select from Preset Modes, Brightness/Contrast, Auto Adjust, Input Source(for IN2030M only), Aspect Ratio and set as 
shortcut key.     
						

							 
Shortcut Key 2   User can select from Preset Modes, Brightness/Contrast, Auto Adjust, Input Source(for IN2030M only), Aspect Ratio and set as 
shortcut key.     
						

							   
OSD Messages   
Reset Personalization   Allows you to restore shortcut key to the default setting.  
When the monitor does not support a particular resolution mode you will see the following message:
IN1930:  
IN2030M:  
						

							This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See  Monitor Specifications  for the 
horizontal and vertical frequency ranges addressable by this monitor. Recommended mode is  1366 x 768 (for IN1930) or 1600 x 900 (for 
IN2030M). 
 
You will see the following message before the DDC/CI function is disabled.  
   
 
 
When the monitor enters the Power Save mode, the following message appears:  
   
 
Activate the computer and wake up the monitor to gain access to the  OSD .
 
   
						

							See  Solving Problems  for more information.  
Setting the Maximum Resolution  
To set the Maximum resolution for the monitor:  
Windows XP:  
1. Right - click on the desktop and select  Properties .    
If you press any button other than the power button the following messages will appear depending on the selected input:
   
 
If VGA or DVI cable is not connected, a floating dialog box as shown below appears. The monitor will enter  Power Save Mode after 5 minutes  if left at this 
state.
 
 or