Dell In1910n Users Guide

							 
Notes, Notices, and Cautions  
Information in this document is subject to change without notice.  
 
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.   is strictly forbidden.  
Trademarks used in this text:  Dell  and the  DELL  logo   are trademarks of Dell Inc;   Microsoft  and  Windows  are either trademarks or registered trademarks of Microsoft Corporation in 
the United States and/or other countries; As an ENERGY STAR partner, Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.  
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any 
proprietary interest in trademarks and trade names other than its own.  
Model IN1910Nb/IN1910Nf  
March  
   
   About Your Monitor  
Setting Up the Monitor  
Operating the Monitor  
Solving Problems  
Appendix  
   
NOTE:  A NOTE indicates important information that helps you make better use of your computer. 
NOTICE:  A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. 
  CAUTION:  A CAUTION indicates a potential for property damage, personal injury, or death.  
						

							Back to Contents Page    
    
 
 
   Package Contents  
   Product Features  
   Identifying Parts and Controls  
   Monitor Specifications  
   Plug and Play Capability  
   LCD Monitor Quality & Pixel Policy  
   Maintenance Guidelines  
Package Contents    
Your monitor ships with the components shown below. Ensure that you have received all the components and  contact Dell  if something is missing.  
   
Product Features    NOTE:  Some items may be optional and may not ship with your Monitor. Some features or media may not be available in certain countries.
    l Monitor with stand  
  l Power Cable  
   
  l VGA Cable  
   
  l Drivers and Documentation  media 
l Quick Setup Guide    
l Safety Information   
   
						

							The  IN1910N  flat panel display has an active matrix, thin - film transistor (TFT), liquid crystal display (LCD). The monitor features include:   
■   18.5 - inch (469.9 mm) v iewable area display.  
■  1366 x 768 resolution, plus full - screen support for lower resolutions.   
■  Tilt adjustment capability.   
■  Removable pedestal and Video Electronics Standards Association (VESA) 100 mm mounting holes for flexible mounting solutions.   
■  Plug and play capability if supported by your system.   
■  On - Screen Display (OSD) adjustments for ease of set - up and screen optimization.   
■  Software and documentation CD which includes an information file (INF), Image Color Matching File (ICM), and product documentation.    
■  Energy Saver feature for Energy Star compliance.    
■  Security lock slot.    
Identifying Parts and Features  
Front View  
   
   
Back View  Front View Front panel controls
Label Description
1 - 2 Shortcut keys 
*The default settings are  Preset Modes Select  and Brightness/Contrast 
Select.   
1 Preset Modes Select
2 Brightness/Contrast Select
3 OSD menu select
4 EXIT
5 Power button (with power light indicator)  
						

							 
   
Side View  
  
Bottom View  
 
    Label Description/Use  
1 VESA mounting holes (100 mm)  
(behind attached base plate)   T o mount the monitor.  
2 Barcode serial number label T o contact Dell for technical support.
3 Security lock slot T o help secure your monitor.
4 Dell Soundbar mounting brackets To attach the optional Dell Soundbar.
5 Regulatory rating label Lists the regulatory approvals.
   Left side  
						

							 
  Bottom view  
Monitor Specifications  
Power Management Modes  
If you have VESA's DPMS™ compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in 
use. This is referred to as Power Save Mode. If input from a keyboard, mouse or other input devices is detected by the computer, the monitor will automatically 
wake up. The following table shows the power consumption and signaling of this automatic power - saving feature:   
Pin Assignments  
VGA Connector  
 Label Description
1   AC power cord connector 
2   VGA connector  
VESA Modes   Horizontal 
Sync   Vertical Sync   Video   Power 
Indicator   Power Consumption  
Normal operation   Active   Active   Active   White   16  W (m aximum)  
Active - off mode   Inactive   Inactive   Blanked   Amber   Less than 1 W  
Switch off   -     -     -     Off   Less than 1 W  
NOTE:   This monitor is ENERGY STAR ®
- compliant.
NOTE:  Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the 
monitor.    
Pin 
Number   15 - pin Side of the 
Connected Signal Cable    
						

							   
Flat Panel Specifications  
* IN1910N Color Gamut (Typical) is based on CIE1976 (85%) and CIE1931 (72%).  
Resolution  
   
Preset Display Modes  1   Video - Red    
2   Video - Green  
3   Video - Blue  
4   GND  
5   Self - test  
6   GND - R  
7   GND - G  
8   GND - B  
9   Computer 5V/3.3V  
10   GND - sync  
11   GND  
12   DDC data  
13   H - sync  
14   V - sync  
15   DDC clock  
Screen type Active matrix  -  TFT LCD
Panel type TN
Screen dimensions 18.5 inches (18.5 - inch viewable image size)
Preset display area: 
Horizontal  
Vertical    
409.8 mm (16.1 inches)  
230.4 mm (9.1 inches)
Pixel pitch 0.30 mm
Viewing angle 160° (verticalyfW\SLFDO
						

							   
Electrical  
   
Physical Characteristics  
   
Environmental  VGA, 720 x 400   31.5   70.0   28.3   - /+  
VGA, 640 x 480   31.5   60.0   25.2   - / -  
VESA, 640 x 480   37.5   75.0   31.5   - / -  
VESA, 800 x 600   37.9   60.3   40.0   +/+  
VESA, 800 x 600   46.9   75.0   49.5   +/+  
VESA, 1024 x 768   48.4   60.0   65.0   - / -  
VESA, 1024 x 768   60.0   75.0   78.8   +/+  
VESA, 1366 x 768     47.7   59.8   85.5   +/+  
Video input signals Analog RGB, 0.7 Volts +/ -  5%, positive polarity at 75 ohm input 
impedance  
Synchronization input signals Separate horizontal and vertical synchronizations, polarity - free 
TTL level, SOG (Composite SYNC on green)
AC input voltage/frequency/current 100 to 240 VAC/50 or 60 Hz  +  3 Hz/2.0A (Max.)
Inrush iso surge current 120 V: 30 A (Max.)  
240 V: 60 A (Max.) 
Connector type l D - sub: blue connector   
Signal cable type l D - sub: Detachable, Analog, 15   pin, shipped attached to 
the monitor    
Dimensions (with stand)
Height 344.0  mm  ( 13.54  inches)
Width 453.7 mm  (17.86 inches)
Depth 2 04.8 mm  (8.06 inches)
Dimensions (without stand)
Height  273.8 mm   ( 10.78  inches)  
Width 453.7 mm  (17.86 inches)
Depth 59.2  mm  ( 2.33  inches)
Stand dimensions
Height 129.4 mm  ( 5.09 inches)
Width 2 04.8  mm  (8.06 inches)
Depth 204.8  mm  (8.06 inches)  
Weight
Weight with packaging 4.7  kg (10.36 lb) 
Weight with stand assembly and cables 4.1 kg (9.04 lbyf 
Weight without stand assembly  
( f or wall mount or VESA mount considerations  -  
no cables) 3.4 kg   (7.5  lb)
Weight of stand assembly 0.35 kg  ( 0.77  lb)
Temperature  
Operating 0° to 40° C (32° to 104°Fyf
Non - operating Storage:  - 20° to 60° C ( - 4° to 140° Fyf  
Shipping:  - 20° to 60° C ( - 4° to 140° Fyf
Humidity    
						

							   
Plug and Play Capability  
You can install the monitor in any Plug and Play - compatible system. The monitor automatically provides the computer system with its Extended Display 
Identification Data (EDID) using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings. If required, 
the user can select different settings, but in most cases monitor installation is automatic.  
LCD Monitor Quality & Pixel Policy  
During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. The visible result is a fixed 
pixel that appears as an extremely tiny dark or bright discolored spot. When the pixel remains permanently lit, it is known as a bright dot. When the pixel 
remains black, it is known as a dark dot.    
In almost every case, these fixed pixels are hard to see and do not detract from display quality or usability. A display with 1 to 5 fixed pixels is considered 
normal and within competitive standards.  For more information, see Dell Support site at:  support.dell.com .  
Maintenance Guidelines    
Caring for Your Monitor  
   
F o r best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor:  
l To clean your antistatic screen, lightly dampen a soft, clean cloth with water. If possible, use a special screen - cleaning tissue or solution suitable for the 
antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.   
l Use a lightly - dampened, warm cloth to clean the monitor. Avoid using detergent of any kind as some detergents leave a milky film on the monitor.    
l If you notice a white powder when you unpack your monitor, wipe it off with a cloth.   
l Handle your  monitor with care as dark - colored monitors may scratch and show white scuff marks more than lighter - colored monitors.      
l To help maintain the best image quality on your monitor, use a dynamically changing screen saver and turn off your monitor when not in use.   
Back to Contents Page  
    Operating 10% to 80% (non - condensing)
Non - operating Storage: 5% to 90% (non - condensing)  
Shipping: 5% to 90% (non - condensing)
Altitude  
Operating 3,048 m (12,000 ft) max
Non - operating 9,144 m (40,000 ft) max
Thermal dissipation 85.32  BTU/hour (maximum)  
54.61 BTU/ hour (typical)
  CAUTION:   Read and follow the  Safety Instructions  before cleaning the 
 
  CAUTION:   Before cleaning the monitor, unplug the monitor from the electrical 
   
						

							Back to Contents Page    
 
Appendix  
 
   Safety Instructions  
   FCC Notice (U.S. Only) and Other Regulatory Information  
   Contacting Dell  
   
CAUTION: Safety Instructions  
For information on safety instructions, see the  Safety Information  that ships with your monitor.  
FCC Notice (U.S. Only) and Other Regulatory Information  
For FCC notices and other regulatory information, see the regulatory compliance website located at  www.dell.com
egulatory_compliance .  
Contacting Dell  
For customers in the United States, call 800 - WWW - DELL (800 - 999 - 3355).  
Dell provides several online and telephone - based support and service options. Availability varies by country and product, and some services may not be 
available in your area. To contact Dell for sales, technical support, or customer service issues:  
1. Visit  support.dell.com .   
2. Verify your country or region in the  Choose A Country/Region  drop - down menu at the bottom of the page.   
3. Click  Contact Us  on the left side of the page.   
4. Select the appropriate service or support link based on your need.   
5. Choose the method of contacting Dell that is convenient for you.   
Back to Contents Page  
     CAUTION:  Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, 
electrical hazards, and/or mechanical hazards. 
  NOTE:  If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product 
catalog.    
						

							Back to Contents Page    
 
Setting Up Your Monitor   
 
If you have a Dell  desktop or a Dell  portable computer with internet access  
1. Go to  http://support.dell.com ,  enter your service tag, and download the latest driver for your graphics card.  
2. After installing the drivers for your Graphics Adapter, attempt to set the resolution to   1366x768  again.  
   
Back to Contents Page  NOTE:  If you are unable to set the resolution to  1366x768 ,  please contact Dell ™  to inquire about a Graphics Adapter that supports these resolutions.