Dell E2210 Users Guide

   
Back    
Language   Press  to go back to the main menu.   
Allows you to set the OSD display to one of eight languages: English, Spanish, French, German, Japanese, Brazilian Portuguese, Simplified Chinese or Russian.
Menu Transparency   Allows you to adjust the OSD background from opaque to transparent.  
Menu Timer   Allows you to set the time for which the OSD remains active after you press a key on the monitor.  
Use the   and   keys to adjust the slider in 1 second increments, from 5 to 60...

OSD Warning Messages    
 
Factory Reset   Resets all OSD settings to the factory preset values .    
  Personalize   User can select from Preset Modes, Brightness/Contrast, Auto Adjust, Input Source and set as shortcut key 1 and 2.
 
   
   
 
Back  
Press  to go back to the main menu.    
     
When the monitor does not support a particular resolution mode you will see the following message:
   

   
   
   
   
   
See  Solving Problems  for more information.  
Setting the Maximum Resolution  
To set the Maximum resolution for the monitor:  
1. Right - click on the desktop and select  Properties .   
2. Select the  Settings  tab.   
3. Set the screen resolution to 1440x900 ( E1910 ) or 1680x1050 ( E2210 ).   
4. Click  OK .     
 
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See  Monitor Specifications  for the 
Horizontal and Vertical...

If you do not see 1440x900 ( E1910 ) or 1680x1050 ( E2210 ) as an option, you may need to update your graphics driver. Depending on your computer, 
complete one of the following procedures:  
l If you have a Dell desktop or portable computer: 
Go to  support.dell.com , enter your service tag, and download the latest driver for your graphics card.   
l If you are using a non - Dell computer (portable or desktop):
Go to the support site for your computer and download the latest graphic drivers.   
Go to...

Back to Contents Page   
Setting Up Your Monitor   
 
E1910/E2210  Flat Panel Monitor  
Setting the display resolution to 1440x900 (E1910 Maximum) or 1680x1050 (E2210 
Maximum)  
For optimal display performance, while using the Microsoft Windows ®  operating systems, set the display resolution to 1440x900 ( E1910 ) or 1680x1050 
( E2210 ) pixels by performing the following steps:  
1. Right - click on the desktop and click  Properties .  
2. Select the  Settings  tab.  
3. Move the slider - bar to the...

E1910/E2210  
Information in this document is subject to change without notice.  
 
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.  
Trademarks used in this text:  Dell  and the  DELL  logo   are trademarks of Dell Inc;   Microsoft  and  Windows  are either trademarks or registered trademarks of Microsoft Corporation in 
the United States and/or other countries;  Adobe  is a trademark of Adobe Systems Incorporated, which may be...

Back to Contents Page    
 
Setting Up the Monitor   
E1910/E2210  Flat Panel Monitor Users Guide  
   Attaching the Stand  
   Connecting the Monitor  
   Organizing Your Cables  
   Attaching the Soundbar (optional)  
   Removing the Stand    
Attaching the Stand  
 
To attach the monitor stand:  
1. Remove the cover and place the monitor on it.  
2. Fit the two tabs on the upper part of the stand to the groove on the back of the monitor.  
3. Press the stand till it snaps into its place....

Connecting the white DVI cable  
 
   
   
Connecting the blue VGA cable  
 
   
Organizing Your Cables  
 
 
After attaching all necessary cables to your monitor and computer, (See  Connecting Your Monitor  for cable attachment,) use the cable management slot NOTE:  The Graphics are used for the purpose of illustration only. Appearance of the computer may vary.  

to organize all cables as shown above.  
Attaching the Soundbar(optional)  
 
To attach the Soundbar:  
Removing the Stand  
 
To remove the stand:  
1. Rotate the stand to allow access to the stand release button.   
2. P ress and hold the stand release button.    
3. Lift the stand up and away from the monitor.   
Wall Mounting (Optional)  CAUTION:  Do not use with any device other than Dell Soundbar. 
1. Working from the back of the monitor, attach Soundbar by aligning the two slots with the two tabs...

 
(Screw dimension: M4 x 10mm).  
Refer to the instructions that come with the base mounting kit. To convert your LCD display from a desk - mounted to a wall - mounted display, do the following:  
1. Verify that the power button is turned Off, then disconnect the power cord.  
2. Lay the LCD display face down on a soft cloth.  
3. Remove the stand assembly from the back of the LCD display by pressing quick release button.  
4. Attach the mounting bracket from the VESA compatible wall mounting kit (100 mm...