Dell E2209w Users Guide

Connecting the Blue  VGA Cable
CAUTION: The  graphics are used for the purpose  of illustration only. Appearance of the computer  may vary.
Organizing the Cables
After attaching  all necessary  cables to  your  monitor and  computer, (See Connecting  Your  Monitor for cable  attachment,) use the cable  management slot to
 

NOTICE: Do not use with any device other than  Dell Soundbar.
NOTE: To prevent  scratches on the LCD  screen while  removing the stand,
 

1.  Press and  hold the stand  release  button.
2 .  Lift the stand  up  and  away  from  the monitor .
Wall Mounting (Optional)
(Screw dimension:  M4 x  10mm).
Refer to  the instructions that  come  with the VESA  compatible base  mounting  kit.
1.  Place  the monitor panel on soft cloth  or cushion on stable  flat table.
2 .  Remove the stand
3 .  Use  a  screwdriver to  remove the four  screws securing the plastic cover.
4 .  Attach the mounting  bracket  from  the wall mounting  kit  to  the LCD.
5 ....

Back to  Contents Page
Operating the Monitor
Dell™ E2009W/E2209W Flat Panel Monitor  Users Guide
Using the Front Panel Controls
Using the On -Screen Display (OSD) Menu
Setting  the Optimal  Resolution
Using the Dell Soundbar (Optional)
  Using the Tilt
Using the Front Panel Controls
Use  the control buttons on the front of the monitor to  adjust  the characteristics of the image being displayed.  As you use these buttons to  adjust  the controls,  an OSD shows  the numeric
values of the characteristics...

D
OK /  Input SourceSelect
Use  this button to  select the input source or select an OSD menu  option.Use  the Input source button to  select one  of the two different video  signals  that  may be connected to  your  monitor:
VGA inputDVI-D  input
If  both  VGA and  DVI cables are connected to  one  Computer, this monitor displays  an image automatically as long as a  video  signal  is
present in either  VGA or DVI outputs.  On  a  display  connected to  two Computers,  set  equal time for both  screen...

or
Main  Menu for  Digital  (DVI -D) Input
NOTE: AUTO ADJUST  is only  available  when  you use the analog  (VGA) connector.
2. Push the 
 and   buttons to  move  between  the setting  options.  As you move  from  one  icon to  another,  the option name is highlighted.  See the following table for a  complete  list of all
the options available  for the monitor.
3. Push the 
 button once  to  activate the highlighted option.
4. Push the 
 and   buttons to  select the desired parameter.
5. Push 
 to  enter...

Submenus
BackPush  to  go back  to  the main menu.
Brightness Brightness adjusts the luminance of the backlight.
Push the 
 button to  increase  brightness and  push the  button to  decrease brightness (min  0 ~ max 100).
Contrast Adjust  Brightness first, and  then  adjust  Contrast  only  if further adjustment is necessary.
Push the 
 button to  increase  contrast  
and  push the  button to  decrease contrast  (min  0 ~ max 100). 
The  Contrast  function adjusts the degree of difference between...

INPUT SOURCEUse  the INPUT SOURCE menu  to  select between  different video  signals  that  may be connected to  your  monitor.
Back
Push  to  go back  to  the main menu.
VGASelect VGA input when  you are using  the analog  (VGA) connector. Push  to  select the VGA input source.
DVI -DSelect DVI-D  input when  you are using  the Digital (DVI) connector. Push  to  select the DVI input source.
Color  SettingsUse  the Color  Settings to  adjust  the color  setting  mode and  color  temperature.
There are...

BackPush  to  go back  to  the main menu.
Input Color
Format Allows  you to  set  the video  input mode to.
RGB
: Select this option if your  monitor is connected to  a  computer  or DVD player  using  the VGA and  DVI cable  or the HDMI to  DVI adapter.
YPbPr : Select this option if the your  DVD player  supports  only  YPbPr output.
Mode Selection Allows  you to  set  the display  mode to:
Graphics: Select this mode if your  monitor is connected to  your  computer.
Video: Select this mode if you...

NOTE: Hue adjustment is available  only  for video  input.
Saturation
This  feature  can  adjust  the color  saturation  of the video  image.  Use   or  to  adjust  the saturation  from  0  to  100.
Push 
 to  increase  the monochrome appearance of the video  image
Push 
 to  increase  the colorful  appearance of the video  image
DISPLAY