Dell E2010h Users Guide

							Back to Contents Page    
 
Appendix   
E2010H /E2210H/E2310H Flat Panel Monitor Users Guide  
  Safety Instructions  
  FCC Notice (U.S. Only) and Other Regulatory Information   
  Contacting Dell  
    
   
CAUTION: Safety Instructions  
For information on safety instructions, see the  Product Information Guide .   
FCC Notices (U.S. Only) and Other Regulatory Information  
For FCC notices and other regulatory information, see the regulatory compliance website located at  www.dell.com
egulatory_compliance .  
 
(1) this device may not cause harmful interference, and   
(2yfWKLVGHYLFHPXVWDFFHSWDQ\LQWHUIHUHQFHUHFHLYHGLQFOXGLQJLQWHUIHUHQFHWKDWPD\FDXVHXQGHVLUHGRSHUDWLRQ   
Contacting Dell  
For customers in the United States, call 800 - WWW - DELL (800 - 999 - 3355).  
Dell provides several online and telephone - based support and service options. Availability varies by country and product, and some services may not be 
available in your area. To contact Dell for sales, technical support, or customer service issues:  
 
Back to Contents Page  CAUTION:  Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, 
electrical hazards, and/or mechanical hazards. 
NOTE:  If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, 
or Dell product catalog. 
1. Visit  support.dell.com . 
2.  Verify your country or region in the  Choose A Country/Region  drop - down menu at the bottom of the page. 
3. Click  Contact Us  on the left side of the page.
4. Select the appropriate service or support link based on your need.
5.  Choose the method of contacting Dell that is convenient for you.  
						

							Back to Contents Page    
Setting Up Your Monitor   
 
 
1. Go to  http://support.dell.com ,  enter your service tag, and download the latest driver for your graphics card.   
2. After installing the drivers for your Graphics Adapter, attempt to set the resolution to  1600 x 900 (for E2010H) or 1920x1080 (for E2210H/E2310H) 
again.  
Back to Contents Page  NOTE:  If you are unable to set the resolution to 1600 x 900 (for E2010HyfRU[IRU(+(+\f , please contact Dell™ to inquire about a 
Graphics Adapter that supports these resolutions.    
						

							Back to Contents Page    
Setting Up Your Monitor   
E2010H/E2210H/E2310H  Flat Panel Monitor   
 
1. Right - click on the desktop and click  Properties .  
2. Select the  Settings  tab.  
3. Select  Advanced .  
4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).   
5. Refer to the graphic card provider website for updated driver (for example,  http://www.ATI.com  OR  http://www.NVIDIA.com  ).  
6. After installing the drivers for your Graphics Adapter, attempt to set the resolution to  1600 x 900   (for E2010H)  or 1920 x   1080 (for E2210H/E2310H) 
again.  
   
Back to Contents Page  NOTE:  If you are unable to set the resolution to 1600 x 900 (for E2010H) or 1920 x 1080 (for E2210H/E2310H), please contact the manufacturer of your 
computer or consider purchasing a graphics adapter that will support the video resolution of 1600 x 900 (for E2010HyfRU[IRU(+(+\f.  
      
						

							Back to Contents Page    
 
Operating the Monitor   
E2010H/E2210H/E2310H  Flat Panel Monitor Users Guide  
   Using the Front Panel Controls  
   Using the On - Screen Display (OSD) Menu  
   Setting the Maximum Resolution  
   Using the Dell Soundbar (Optional)  
   Using the Tilt  
    
Power On the Monitor  
Press the   button to turn on the monitor.  
      
Using the Front Panel Controls  
Use the keys on the front of the monitor to adjust the image settings.   
           
Front panel Key Description  
A  
Preset Modes     
Use the Preset modes key to choose from a list of preset color modes. See  Using the OSD Menu .  
B  
Brightness / Contrast  Use the Brightness / Contrast key to adjust the brightness and contrast.
C  
Menu    
Use the Menu key to access the Menu.  
D   
Exit    
Use the Exit key to exit the Menu.    
						

							Using the On - Screen Display (OSD) Menu  
 
Accessing the Menu Syste  
The table below provides a list of all the OSD menu options and their functions.   
1.   Press the   button to open the OSD menu and display the main menu.   
  Main Menu   
2.   Press the    and   buttons to toggle between options in the Menu. As you move from one icon to another, the option name is highlighted.   
3.   To select the highlighted item on the menu press the   button again.   
4.   Press the   button to enter the slide bar and then use the   or   buttons, according to the indicators on the menu, to make your changes.   
5.   Select the    to exit from the on - screen Display menu or select   to accept and return to the previous menu.   
Icon   Menu and Submenus Description
  BRIGHTNESS/CONTRAST   Use the Brightness and Contrast menu to adjust the Brightness/Contrast.   
 
Brightness  
Press the    key to increase brightness and press the   key to decrease brightness (min 0 ~ max 100).   
Contrast  
Press the   key to increase contrast and press the   key to decrease contrast (min 0 ~ max 100).     
						

							Auto 
Adjust    
    Use  this key to activate automatic setup and adjust menu. The following dialog appears on a black screen as the monitor self
 
Auto Adjustment allows the monitor to self - adjust to the incoming video signal. After using Auto Adjustment, you can further tune your monitor by using the Pixel Clock 
(Coarse) and Phase (Fine) controls under Image Settings.    
NOTE:  Auto Adjust does not occur if you press the button while there are no active video input signals or attached cables.
INPUT SOURCE  Use the INPUT SOURCE menu to select between different video signals that may be connected to your monitor. 
VGA  
Select VGA input when you are using the analog (VGA) connector. Push   to select the VGA input source.
DVI - D
Select DVI - D input when you are using the Digital (DVI) connector. Push  to select the DVI input source.
Scan for Sources Select Auto Select to scan for available input signals.
  COLOR SETTINGS   Use the  Color Setting  menu to adjust the monitor's color settings.
 
Input Color Format   Allows you to set the video input mode to :   
l RGB : Select this option if your monitor is connected to a computer or DVD player using the HDMI cable or the HDMI to DVI adapter
l YPbPr : Select this option if your DVD player supports only YPbPr output .   
 
Mode Selection   Allows you to set the display mode to:   
l Graphics : Select this mode if your monitor is connected to your computer.   
l Video : Select this mode if your monitor is connected to a DVD player.   
NOTE:  Depending upon the Display Mode you select the Preset Modes available for your monitor change.  
 
Preset Mode   Allows you to choose from a list of preset color modes.   
In the  Graphics   mode, you can set the color to the following preset values:     
						

							 
   
l Standard : Loads the monitors default color settings. This is the default preset mode.   
l Multimedia : Loads color settings ideal for multimedia applications.   
l Game : Loads color settings ideal for most gaming applications.   
l Warm : Increase the color temperature. The screen appears warmer with a red/yellow tint.   
l Cool : Decreases the color temperature. The screen appears cooler with a blue tint.   
l Custom (RGB) : Allows you to manually adjust the color settings. press the    and    keys to adjust the Red, Green, and Blue values and create 
your own preset color mode.   
 
    In the  Video  mode, you can set the color to the following preset values:   
 
       
l Movie :   Loads color settings ideal for movies. This is the default preset mode.   
l Game : Loads color settings ideal for most gaming applications.   
l Sports : Loads color settings ideal for sports.   
l Nature:  Loads color settings ideal for nature.   
  Hue
Allows you to adjust the skin tone of the image. Use   or   to adjust the hue from 0 to 100. 
NOTE:   Hue adjustment is available only in the  Video  mode.  
  Saturation
Allows you to adjust the color saturation of the image. Use   or   to adjust the saturation from 0 to 100. 
NOTE:  Saturation adjustment is available only in the  Video  mode.  
 
 
Reset Color Settings   Resets your monitors color settings to the factory defaults.  
  DISPLAY  SETTINGS   Use the  Displays Settings  menu to adjust the monitors display settings.    
						

							 
   
 
Back  
Press  to go back to the main menu .   
 
Horizontal Position    
Use the    or   buttons to adjust image left and right. Minimum is 0 ( - ). Maximum is 100 (+).   
 
Vertical Position    
Use the    or   buttons to adjust image up and down. Minimum is 0 ( - ). Maximum is 100 (+)   
 
Sharpness    
This feature can make the image look sharper or softer. Use    or   to adjust the sharpness from 0 to 100  
 
Pisel Clock    
The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference. Use    or   buttons to adjust for best image quality
 
Phase     If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase (fine), again.
 
Reset Display Settings   Select this option to restore default display settings.  
  OTHER SETTINGS   Select this option to adjust the settings of the OSD, such as, the languages of the OSD, the amount of time the menu remains on screen, and so on. 
   
Back    
Language   Press  to go back to the main menu.   
Allows you to set the OSD display to one of eight languages: English, Spanish, French, German, Japanese, Brazilian Portuguese, Simplified Chinese or Russian
Menu Transparency   Allows you to adjust the OSD background from opaque to transparent.    
						

							Menu Timer   Allows you to set the time for which the OSD remains active after you press a key on the monitor.  
Use the   and   keys to adjust the slider in 1 second increments, from 5 to 60 seconds.   
 
Menu Lock   Controls user access to adjustments. When  Lock  is selected, no user adjustments are allowed.   
NOTE:   When the OSD is locked, press the first OSD control above the Power On/Off control for 15 seconds to unlock it.
 
DDC/CI     DDC/CI (Display Data Channel/Command Interface) allows a software on your computer to adjust the monitor display settings like the brightness, color 
balance etc.  
Enable  (Default): Optimizes the performance of your monitor and provides a better customer experience.  
Disable : Disables the DDC/CI option and the following message appears on the screen.  
 
LCD Conditioning   Helps reduce minor cases of image retention. Depending on the degree of image retention, the program may take some time to run. You can enable this 
feature by selecting Enable.  
 
Factory Reset   Resets all OSD settings to the factory preset values .   
  Personalize   Allows you to adjust shortcut key for: 1. Preset modes, 2. Brightness / Contrast, 3. Auto Adjust,  4. Input Source   
						

							OSD Warning Messages   
   
 
Back  
Press  to go back to the main menu.   
When the monitor does not support a particular resolution mode you will see the following message:   
E2010H:  
 
E2210H/E2310H:  
 
 
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See  Monitor Specifications  for the 
Horizontal and Vertical frequency ranges addressable by this monitor. Recommended mode is  1600 x 900 (for E2010H) or 1920 x 1080 (for 
E2210H/E2310H).   
 
You will see the following message before the DDC/CI function is disabled.  
 
 
When the monitor enters the Power Save mode, the following message appears: