Dell Alienware Aurora R4 Owners Manual
Have a look at the manual Dell Alienware Aurora R4 Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Hard Drive(s)31 2Follow the steps in After Working Inside Your Computer on page 15. book.book Page 31 Wednesday, May 16, 2012 2:37 PM
32Hard Drive(s) book.book Page 32 Wednesday, May 16, 2012 2:37 PM
Hard-Drive Fan Assembly33 4 Hard-Drive Fan Assembly WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before You Begin on page 13. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. WARNING: The heat sink may be very hot during normal operation. Provide sufficient time for the heat-sink to cool before you touch it. Prerequisites 1Remove the left side-panel. See Removing the Left Side-Panel on page 25. Removing the Hard-Drive Fan Assembly 1Open the PCI shroud. See Opening the PCI Shroud on page 45. 2Remove the drive-bay shroud. See Removing the Drive-Bay Shroud on page 47. NOTE: Be careful not to damage the hard-drive fan cable while lifting the hard-drive fan assembly. 3Carefully slide the hard-drive fan assembly out of the hard-drive fan assembly bay. 4Note the routing of the hard-drive fan cable and then disconnect the hard- drive fan cable from the FAN_HDD connector on the master I/O board. 5Lift the hard-drive fan assembly out of the chassis. book.book Page 33 Wednesday, May 16, 2012 2:37 PM
34Hard-Drive Fan Assembly Replacing the Hard-Drive Fan Assembly 1Slide the hard-drive fan assembly into the hard-drive fan assembly bay. 2Route the cable through the slot in the hard-drive bay and then connect the hard-drive fan assembly cable to the FAN_HDD connector on the master I/O board. 3Replace the drive-bay shroud. See Replacing the Drive-Bay Shroud on page 48. 4Close the PCI shroud. See Closing the PCI Shroud on page 46. 1 hard-drive fan cable 2 hard-drive fan assembly 1 2 book.book Page 34 Wednesday, May 16, 2012 2:37 PM
Hard-Drive Fan Assembly35 Postrequisites 1Replace the left side-panel. See Replacing the Left Side-Panel on page 27. 2Follow the steps in After Working Inside Your Computer on page 15. book.book Page 35 Wednesday, May 16, 2012 2:37 PM
36Hard-Drive Fan Assembly book.book Page 36 Wednesday, May 16, 2012 2:37 PM
Optical Drive(s)37 5 Optical Drive(s) WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before You Begin on page 13. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance. Prerequisites 1Remove the left side-panel. See Removing the Left Side-Panel on page 25. Removing the Optical Drive(s) 1Press the AlienHead on the front of your computer to lower the drive panel. 2Disconnect the data cable and power cable from the optical drive. 3Lift the securing tab, and holding the tab in place, push and slide the optical drive out through the front of the computer. book.book Page 37 Wednesday, May 16, 2012 2:37 PM
38Optical Drive(s) Replacing the Optical Drive(s) 1Lift and hold the securing tab, and then slide the optical drive through the front of the computer until the securing tab snaps into place. 2Connect the power cable and the data cable to the optical drive. 3Lift the drive panel towards the top of your computer until it snaps into place. Postrequisites 1Replace the left side-panel. See Replacing the Left Side-Panel on page 27. 1 power cable 2 data cable 3 securing tab 4 optical drive 1 23 4 book.book Page 38 Wednesday, May 16, 2012 2:37 PM
Optical Drive(s)39 2Follow the steps in After Working Inside Your Computer on page 15. book.book Page 39 Wednesday, May 16, 2012 2:37 PM
40Optical Drive(s) book.book Page 40 Wednesday, May 16, 2012 2:37 PM