DELL 720 User Manual

							Polish Center for Testing and Certification Notice
The equipment should draw power from a socket with an attached protection circuit (a 3-prong socket). All
equipment that works together (computer, monitor, printer, and so on) should have the same power supply
source.
The phasing conductor of the rooms electrical installation should have a reserve short-circuit protection
device in the form of a fuse with a nominal value no larger than 16 amperes (A).
To completely switch off the equipment, the power supply cable must be removed from the power supply
socket, which should be located near the equipment and easily accessible.
A protection mark B confirms that the equipment is in compliance with the protection usage requirements
of standard PN-EN 55022. 
						

							BSMI Notice (Taiwan Only)
If you find a 
 or 
 mark on the regulatory label on the bottom, side, or back panel of your
device, the following section is applicable: 
						

							NOM Information (Mexico Only)
The following information is provided on the device(s) described in this document in compliance with the
requirements of the official Mexican standards (NOM): 
						

							Exporter: Dell Inc.
One Dell Way
Round Rock, TX 78682
Importer: Dell Computer de México, S.A. de C.V.
Paseo de la Reforma 2620 - 11° Piso
Col. Lomas Altas
11950 México, D.F.
Ship to: Dell Computer de México, S.A. de C.V.
al Cuidado de Kuehne & Nagel de México S. de R.L.
Avenida Soles No. 55
Col. Peñon de los Baños
15520 México, D.F.
Model number: 720
Supply voltage: 100-127V
Frequency: 50/60Hz
Current consumption: 1.0A
Output voltage: 30VDC
Output current: 0.4A
ENERGY STAR® Compliance
Certain configurations of Dell devices comply with the requirements set forth by the Environmental
Protection Agency (EPA) for energy-efficient devices. If the front panel of your device bears the ENERGY
STAR® Emblem, your original configuration complies with these requirements and all ENERGY STAR® power
management features of the device are enabled.
NOTE:  Any Dell device bearing the ENERGY STAR® Emblem is certified to comply with EPA ENERGY STAR®
requirements as configured when shipped by Dell. Any changes you make to this configuration (such as
installing additional expansion cards or drives) may increase the devices power consumption beyond the
limits set by the EPAs ENERGY STAR® Computers program.
ENERGY STAR® Emblem
The EPAs ENERGY STAR® Computers program is a joint effort between the EPA and computer
manufacturers to reduce air pollution by promoting energy-efficient products. The EPA estimates that use of
ENERGY STAR® Computer products can save users up to two billion dollars annually in electricity costs. In
turn, this reduction in electricity usage can reduce emissions of carbon dioxide, the gas primarily responsible
for the greenhouse effect, and sulfur dioxide and nitrogen oxides, the primary causes of acid rain.
You can also help reduce electricity usage and its side effects by turning off your device when it is not in use
for extended periods of time, particularly at night and on weekends.