Dell 2709w Users Guide

   
Universal Serial Bus (USB) Interface  
USB Upstream  C onnector  
   
    
USB Downstream  C onnector  
   
    
USB  P orts  
l 1 upstream  -  rear   
l 4 downstream  -  2 on rear; 2 on  left  side  Operating   10% to 80% (noncondensing)  
Nonoperating   Storage: 5% to 90% (noncondensing)  
Shipping: 5% to 90%(noncondensing)  
Altitude      
Operating   3,657.6 m  ( 12,000 ft ) max  
Nonoperating   12,192 m  ( 40,000 ft ) max  
Thermal dissipation   375 BTU/hour (maximum)  
195 BTU/hour (typical)...

Card Reader Specifications  
Overview  
l The Flash Memory Card Reader is a USB storage device that allows users to read and write information from and into the memory card.   
     
l The Flash Memory Card Reader is automatically recognized by Microsoft ®  Windows ®  2000, Windows ®  XP and Windows Vista ® .   
     
l Once installed and recognized, each separate memory card (slot) appears as a separate drive/drive letter.   
     
l All standard file operations (copy, delete, drag - and - drop, etc.)...

   
General   
Performance    
Plug and Play Capability  
You can install the monitor in any Plug and Play - compatible system. The monitor automatically provides the computer system with its Extended Display 
Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. If required, the 
user can select different settings, but in most cases monitor installation is automatic.  
Maintenance Guidelines    
Caring for Your Monitor...

Back to Contents Page    
 
Appendix  
 
   Safety Instructions  
   FCC Notice (U.S. Only) and Other Regulatory Information  
   Contacting Dell  
   
CAUTION: Safety Instructions  
For information on safety instructions, see the  Safety Information .  
FCC Notice (U.S. Only) and Other Regulatory Information  
For FCC notices and other regulatory information, see the regulatory compliance website located at  www.dell.com
egulatory_compliance .  
Contacting Dell  
      To contact Dell electronically,...

Back to Contents Page    
 
Setting Up Your Monitor   
 
If you have a Dell  desktop or a Dell  portable computer with internet access  
1.  Go to   http://support.dell.com ,  enter your service tag, and download the latest driver for your graphics card.    
2.  After installing the drivers for your Graphics Adapter, attempt to set the resolution to   1920x1200  again.  
   
Back to Contents Page  NOTE:  If you are unable to set the resolution to  1920x1200,  please contact Dell ™  to inquire about a...

Back to Contents Page    
 
Setting Up Your Monitor   
 
If you have non Dell  desktop, portable computer, or graphic card  
1. Right - click on the desktop and click  Properties .  
2. Select the  Settings  tab.  
3.  Select   Advanced .  
4.  Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).   
5.  Please refer to the graphic card provider website for updated driver (for example,   http://www.ATI.com  OR   http://www.NVIDIA.com  )....

Back to Contents Page    
 
Operating the Monitor   
 
   Using the Front Panel Controls  
   Using the On - Scree Display (OSD) Menu  
   Setting the Optimal Resolution  
   Using the Dell Soundbar (Optional)  
   Using the Tilt, Swivel and Vertical Extension  
   
Using the Front Panel  
Use the buttons on the front of the monitor to adjust the image settings.   
      
1 - 3 Shortcut keys   Use this key for direct access to the control menu that you define in the personalize menu. 
* The default...

   
Using the OSD Menu  
1.  Press   to launch the OSD menu and display the main menu.   
Main Menu for Analog (VGA) Input    
If either VGA or DVI - D input is selected and both VGA and DVI - D cables are not connected, a floating dialog box as shown below appears. 
    
If either Composite, or Component input is selected and the cables are not connected or the video source is turned off, the screen does 
not have an image. If any button is pressed (except power button), the monitor displays the...

 
Or  
Main Menu for non Analog (non VGA) Input  
 
2.   Press  the   and   buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the table 
for a  complete list of all the options available for the monitor.   
3.   Press  the    button once to activate the highlighted option.    
4.   Press   and   button to select the desired parameter.   
5.  Press    to enter the slide bar and then use the    and   buttons, according to the indicators...

6.   Press   return to the main menu or   to exit the OSD menu.  
   
Icon   Menu and Submenus   Description  
 
   
   
   
   
   
 
 
 Brightness/Contrast  
 
Brightness  
Contrast  
Back   Allows you to adjust the brightness and contrast.
Brightness adjusts the luminance of the backlight.   
Press the    button to increase brightness and Press the   button to decrease brightness (min 0 ~ max 100).   
Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary.  
Press...