DELL 2350d User Manual
Have a look at the manual DELL 2350d User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
From this menu: You can: Plain* Card Stock Transparency Recycled Labels Bond Envelope Rough Envelope Letterhead Preprinted Colored Light Heavy Rough/Cotton Custom (where x represents 1–6) Identify the relative weight of the print media loaded in a specific tray and ensure that the toner adheres properly to the printed page. Light Heavy Normal* *Factory default setting Paper Loading
From this menu: You can: Recycled Bond Letterhead Preprinted Colored Paper Light Paper Heavy Paper Custom Type (where x represents 1–6) Determine whether 2-sided printing occurs for all jobs specifying a print media type. Duplex Off* *Factory default setting Universal Setup From this menu: You can: Units of Measure Specify the height, width, and feed direction of the Universal Paper Size.Inches* (US) Millimeters* (non-US) Portrait Width Set the portrait width of the universal media.3–14.17 inches 76–1219 mm NOTE: If the width exceeds the maximum, then the printer uses the maximum width allowed. NOTE: 8.5 inches is the US factory default setting. Inches can be increased in 0.01-inch increments. NOTE: 216 mm is the international factory default setting. Millimeters can be increased in 1-mm increments. Portrait Height Set the portrait height of the universal media.3–14.17 inches 76–1219 mm *Factory default setting
From this menu: You can: NOTE: If the height exceeds the maximum, then the printer uses the maximum height allowed. NOTE: 14 inches is the US factory default setting. Inches can be increased in 0.01-inch increments. NOTE: 356 mm is the international factory default setting. Millimeters can be increased in 1-mm increments. Feed Direction Specify the feed direction of the Universal Paper Size.Short Edge* Long Edge NOTE: Feed Direction appears only if the longest edge of the media is shorter than the Maximum Physical Width of the printer. *Factory default setting Reports Mode Mode Main Menu Reports Menu Settings Page Device Statistics Network Setup Page Profiles List Print Fonts Print Directory Asset Report From the menu list, use the Arrow buttons to scroll the Reports menu. 1. Press the Select button . 2. Press the Right Arrow button until the heading you want appears on the display, and then press the Select button . 3. Use the Arrow buttons to scroll through the available menu items. 4. 5. NOTE: If the height exceeds the maximum, then the printer uses the maximum height allowed. NOTE: 14 inches is the US factory default setting. Inches can be increased in 0.01-inch increments. NOTE: 356 mm is the international factory default setting. Millimeters can be increased in 1-mm increments. Feed Direction Specify the feed direction of the Universal Paper Size.Short Edge* Long Edge NOTE: Feed Direction appears only if the longest edge of the media is shorter than the Maximum Physical Width of the printer. *Factory default setting Reports Mode Mode Main Menu Reports Menu Settings Page Device Statistics Network Setup Page Profiles List Print Fonts Print Directory Asset Report From the menu list, use the Arrow buttons to scroll the Reports menu. 1. Press the Select button . 2. Press the Right Arrow button until the heading you want appears on the display, and then press the Select button . 3. Use the Arrow buttons to scroll through the available menu items. 4. 5.
4. When the setting you want appears on the display, press the Select button to save the setting. 5. From this menu: You can: Menu Settings Page Display information relating to:Current settings for each of the menu items for all menus Cartridge information List of installed options and features Device Statistics View information relating to:Job Information Supply Information Printer USB Direct NOTE: The details presented on this page vary for every device type. Network Setup Page List important print server information (e.g., hardware addresses, firmware revision level, protocol settings, etc.). The page displays specific details about the devices: Standard Network Card Integrated Network Option Settings TCP/IP IPv6 NOTE: The Compi: field that appears on this screen always displays in English, regardless of the value of the devices Display. Profiles List View profiles stored in the printer. Print Fonts Print a sample of all the fonts available for the printer language currently set in the printer. PCL Fonts PostScript Fonts Print Directory View a list of resources that are stored in the user area of the flash and disk options. NOTE: The Print Directory Page appears only when a non-defective flash option or a non-defective disk option is installed and formatted. Asset Report Manage the printers asset information (e.g., serial number, model name, etc.).
Network/Ports Mode Mode Main Menu Network/Port Active NIC Network Menu USB Menu Parallel Menu Active NIC Mode Main Menu Mode Main Menu Active NIC Auto* Standard Network * Factory default setting Network Mode Main Menu Mode Main Menu Network PCL SmartSwitch PS SmartSwitch NPA Mode Network Buffer MAC Binary PS Network Setup Each Network sub-menu appears only if the device has a standard network card or if additional network cards have been installed. Use the Network menu to change printer settings on jobs sent through a network port (either Standard Network or Network Opt ). From the menu list, use the Arrow buttons to scroll to the Network menu. 1. Press the Select button . 2. Press the Right Arrow button until the heading you want appears on the display, and then press the Select button . 3. Use the Arrow buttons to scroll through the available menu items. 4. 5.
4. When the setting you want appears on the display, press the Select button to save the setting. 5. Network Mode Main Menu From this menu: You can: PCL SmartSwitch Set the printer to automatically switch to PCL emulation when a print job requires it, regardless of the default printer language. On* Off PS SmartSwitch Set the printer to automatically switch to PostScript emulation when a print job requires it, regardless of the default printer language. On* Off NPA Mode Send print jobs to the printer, and query printer status information simultaneously. Off Auto* Network Buffer Assign a size to the network input buffer.Auto* Disabled 3K to (in 1K increments). MAC Binary PS Configure the printer to process Macintosh binary PostScript emulation print jobs. Off On Auto* Standard Network Setup Define basic printer network settings.Reports Network Card TCP/IP IPv6 * Factory default setting USB Mode Mode Mode Main Menu USB PCL SmartSwitch PS SmartSwitch NPA Mode
Mode Mode Main Menu USB Buffer MAC Binary PS USB With ENA NOTE: Applicable only to Dell 3300 Wireless Print Adapter (sold separately). Use the USB menu to change printer settings on jobs sent through a USB port.From the menu list, use the Arrow buttons to scroll to the USB menu. 1. Press the Select button . 2. Press the Right Arrow button until the heading you want appears on the display, and then press the Select button . 3. Use the Arrow buttons to scroll through the available menu items. 4. When the setting you want appears on the display, press the Select button to save the setting. 5. USB Mode Main Menu From this menu: You can: PCL SmartSwitch Set the printer to automatically switch to PCL emulation when a print job requires it, regardless of the default printer language. On* Off PS SmartSwitch Set the printer to automatically switch to PostScript emulation when a print job requires it, regardless of the default printer language. On* Off NPA Mode Send print jobs to the printer, and query printer status information at the same time. Off Auto*USB Buffer MAC Binary PS USB With ENA NOTE: Applicable only to Dell 3300 Wireless Print Adapter (sold separately). Use the USB menu to change printer settings on jobs sent through a USB port.From the menu list, use the Arrow buttons to scroll to the USB menu. 1. Press the Select button . 2. Press the Right Arrow button until the heading you want appears on the display, and then press the Select button . 3. Use the Arrow buttons to scroll through the available menu items. 4. When the setting you want appears on the display, press the Select button to save the setting. 5. USB Mode Main Menu From this menu: You can: PCL SmartSwitch Set the printer to automatically switch to PCL emulation when a print job requires it, regardless of the default printer language. On* Off PS SmartSwitch Set the printer to automatically switch to PostScript emulation when a print job requires it, regardless of the default printer language. On* Off * Factory default setting
From this menu: You can: NPA Mode Send print jobs to the printer, and query printer status information at the same time. Off Auto* USB Buffer Assign a size to the USB input buffer.Auto* Disabled 3K to (in 1K increments). MAC Binary PS Configure the printer to process Macintosh binary PostScript emulation print jobs. Off On Auto* USB With ENA ENA Address-Set the USB port ENA address ENA Netmask-Set the USB port ENA Netmask ENA Gateway-Set the USB port ENA Gateway NOTE: 4-field IP address (0.0.0.0*) NOTE: The settings are shown when an ENA is attached. NOTE: This is applicable only to Dell 3300 Wireless Print Adapter (Sold separately). * Factory default setting Parallel Mode Mode Mode Main Menu Parallel PCL SmartSwitch PS SmartSwitch NPA Mode Parallel Buffer Advanced Status Protocol Honor Init Parallel Mode 2 MAC Binary PS Parallel With ENA Use the Parallel menu to change printer settings on jobs sent through a parallel port.1. NPA Mode Send print jobs to the printer, and query printer status information at the same time. Off Auto* USB Buffer Assign a size to the USB input buffer.Auto* Disabled 3K to (in 1K increments). MAC Binary PS Configure the printer to process Macintosh binary PostScript emulation print jobs. Off On Auto* USB With ENA ENA Address-Set the USB port ENA address ENA Netmask-Set the USB port ENA Netmask ENA Gateway-Set the USB port ENA Gateway NOTE: 4-field IP address (0.0.0.0*) NOTE: The settings are shown when an ENA is attached. NOTE: This is applicable only to Dell 3300 Wireless Print Adapter (Sold separately). * Factory default setting Parallel Mode Mode Mode Main Menu Parallel PCL SmartSwitch PS SmartSwitch NPA Mode Parallel Buffer Advanced Status Protocol Honor Init Parallel Mode 2 MAC Binary PS Parallel With ENA Use the Parallel menu to change printer settings on jobs sent through a parallel port.1.
From the menu list, use the Arrow buttons to scroll the Parallel menu. 1. Press the Select button . 2. Press the Right Arrow button until the heading you want appears on the display, and then press the Select button . 3. Use the Arrow buttons to scroll through the available menu items. 4. When the setting you want appears on the display, press the Select button to save the setting. 5. Parallel Mode Main Menu From this menu: You can: PCL SmartSwitch Set the printer to automatically switch to PCL emulation when a print job requires it, regardless of the default printer language. On* Off PS SmartSwitch Set the printer to automatically switch to PS emulation when a print job requires it, regardless of the default printer language. On* Off NPA Mode Send print jobs to the printer, and query printer status information at the same time. Off Auto* Parallel Buffer Assign a size to the parallel input buffer.Auto* Disabled 3K to (in 1K increments). Advanced Status Enable bidirectional communication through the parallel port.On* Off Protocol Specify the parallel interface protocol. Receive information at a much higher transmission rate if the printer is set * Factory default setting
From this menu: You can: Receive information at a much higher transmission rate if the printer is set to Fastbytes (if computer supports Fastbytes), or receive information at a normal transmission rate if the printer is set to Standard. Standard Fastbytes* Honor Init Determine whether the printer honors hardware initialization requests from the computer. The computer requests initialization by activating the INIT signal on the parallel interface. Many personal computers activate the INIT signal each time the computer is turned on and off. On Off* Parallel Mode 2 Determine whether the parallel port data is sampled on the leading (on) or trailing (off) edge of the strobe. Off On* NOTE: This menu appears only if supported by the parallel port. MAC Binary PS Configure the printer to process Macintosh binary PostScript emulation print jobs. Off On Auto* Parallel With ENA ENA Address ENA Netmask ENA Gateway Configure the parallel port ENA address, Netmask, and Gateway settings. 4 field IP address (0.0.0.0*) NOTE: These settings are shown only when ENA is attached through the parallel port. * Factory default setting Settings Mode Mode Main Menu Settings General Settings Setup Menu Finishing MenuReceive information at a much higher transmission rate if the printer is set to Fastbytes (if computer supports Fastbytes), or receive information at a normal transmission rate if the printer is set to Standard. Standard Fastbytes* Honor Init Determine whether the printer honors hardware initialization requests from the computer. The computer requests initialization by activating the INIT signal on the parallel interface. Many personal computers activate the INIT signal each time the computer is turned on and off. On Off* Parallel Mode 2 Determine whether the parallel port data is sampled on the leading (on) or trailing (off) edge of the strobe. Off On* NOTE: This menu appears only if supported by the parallel port. MAC Binary PS Configure the printer to process Macintosh binary PostScript emulation print jobs. Off On Auto* Parallel With ENA ENA Address ENA Netmask ENA Gateway Configure the parallel port ENA address, Netmask, and Gateway settings. 4 field IP address (0.0.0.0*) NOTE: These settings are shown only when ENA is attached through the parallel port. * Factory default setting Settings Mode Mode Main Menu Settings General Settings Setup Menu