DELL 2350d User Manual

Mode Mode Main Menu
Finishing Menu
Quality Menu
Utilities Menu
PostScript Menu
PCL Emul Menu
General Settings Mode
Main Menu Mode
Main
Menu
General Settings Display
Language
Run
Initial
Setup
Alarms
Timeouts
Print
Recovery
Factory
Defaults
From the menu list, use the Arrow buttons 
   to scroll to the General Settings menu.
1.
Press the  Select button 
.
2.
Press the  Right Arrow  button 
 until the heading you want appears on the display, and then press
the  Select  button 
.
3.
Use the  Arrow buttons...

From this menu: You can:
Display Language Set the language of the text appearing on the display.English*
Arabic
Brazilian Portuguese
Czech
Danish
Dutch
Finnish
French
German
Greek
Hebrew
Iberian Portuguese
Italian
Japanese (Kanji)
Norwegian
Polish
Russian
Simplified Chinese
Spanish
Swedish
Turkish
Run Initial Setup Launch a setup wizard when the printer is powered
on.
Yes*
No
Alarms Set an alarm to sound when the printer requires
operator intervention.
Cartridge Alarm Off*
Single
Timeouts Specify the...

From this menu: You can:
Print TimeoutDisabled
1–255 seconds
90 seconds*
Wait TimeoutDisabled
15–65535 seconds
40 seconds*
Network Job TimeoutDisabled
10–255 seconds
90 seconds*
Print Recovery Specify whether the printer continues from certain
offline situations, reprints jammed pages, or waits
until the entire page is processed and ready to be
printed.
Auto Continue Disabled*
5–255 seconds
Jam RecoveryOn
Off
Auto*
Page ProtectOn
Off*
Factory Defaults Reset and restore appropriate settings to their...

Main Menu Mode Main Menu
Setup Printer Language
Print Area
Download Target
Resource Save
From the menu list, use the  Arrow buttons 
   to scroll to the Setup menu.
1.
Press the  Select button 
.
2.
Press the  Right Arrow  button 
 until the heading you want appears on the display, and then press
the  Select  button 
.
3.
Use the  Arrow buttons 
   to scroll through the available menu items.
4.
When the setting you want appears on the display, press the  Select button 
 to save the setting.
5.
Use the...

From
this
menu:
You can:
Resource
Save
Specify whether all permanent downloaded resources, such as fonts and
macros stored in RAM, are saved if the printer receives a job that
requires more memory than is available.
Off*-The printer retains downloaded resources only until memory
is needed. It then deletes those resources associated with the
inactive printer language.
On-The printer retains all downloaded resources for all printer
languages during language changes and printer resets. If the
printer runs...

4.
When the setting you want appears on the display, press the  Select button 
 to save the setting.
5.
Finishing Mode Main Menu
From this
menu:
You can:
Sides
(Duplex)
Enable duplex (2-sided) printing.1 sided*
2 sided
Duplex
Binding
Define the way duplexed pages are bound and how the printing on
the back of the page is oriented in relation to the printing on the
front of the page.
Long Edge*
Short Edge
Copies Specify a default number of copies for each print job.1*–999
Blank Pages Define whether blank...

From this
menu:
You can:
N-up
(Pages/Side)
Specify that multiple-page images be printed on one side of a sheet
of paper.
Off*
2 Up
3 Up
4 Up
6 Up
9 Up
12 Up
16 Up
N-up
Ordering
Specify the positioning of multiple-page images when using multi-
page print.
Horizontal*
Vertical
Reverse Horizontal
Reverse Vertical
NOTE:  Positioning depends on the number of images and whether
the images are in portrait or landscape orientation.
Orientation Specify the orientation of a multiple-page sheet.Auto*
Landscape...

1.
Press the  Select button 
.
2.
Press the  Right Arrow  button 
 until the heading you want appears on the display, and then press
the  Select  button 
.
3.
Use the  Arrow buttons 
   to scroll through the available menu items.
4.
When the setting you want appears on the display, press the  Select button 
 to save the setting.
5.
Quality Mode Main Menu
From this
menu:
You can:
Print
Resolution
Specify the printed output resolution.600 dpi*
1200 dpi
1200 Image Q
2400 Image Q
Pixel
Boost
Approximate a...

From this
menu:
You can:
NOTE:  This setting is available only on the PCL emulation driver,
PostScript emulation driver, or on the printer Embedded Web
Server.
Gray
Correction
Automatically adjust the contrast enhancement applied to images.Auto*
Off
Auto applies different gray values to each object on the printed
page.
Off turns off gray correction.
Brightness Adjust the gray value of printed images.-6 to +6
0*
Contrast Adjust the contrast of printed images.0–5
0*
* Factory default setting
Utilities...

From this menu: You can:
Hex Trace Determine if there is a problem with the cable or
language interpreter when unexpected character
prints or missing characters are encountered
Isolate printing problems and their source
Identify what information is received by the printer
PostScript Mode
Mode Menu Mode Main Menu
PostScript Print PS Error
Font Priority
From the menu list, use the  Arrow buttons 
   to scroll to the PostScript menu.
1.
Press the  Select button 
.
2.
Press the  Right Arrow  button 
 until...