DELL 2350d User Manual

1.
Remove the jammed paper.
2.Close the rear exit.
3.
Replace the narrow paper in Tray 1 with a wider paper.
4.
24x Paper Jam - Check Tray 
Jam in Tray 1
Pull Tray 1 out.
CAUTION: The inside of the printer might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching it.
1.Remove the jam.
2. 

2.
Insert the tray.
3.
Jam in Tray 2 Pull Tray 2 out.
CAUTION: The inside of the printer might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching it.
1.Remove the jam.
2. 

NOTE: Make sure all paper fragments are removed.
2.
Insert the tray.
3.
251 Paper Jam - Check Multipurpose Feeder Remove the paper from the multipurpose feeder.
1.Flex the sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the
paper. Straighten the edges on a level surface.
2.
3. 

2.
Load the paper into the multipurpose feeder.
3.
Slide the paper guide toward the inside of the tray until it lightly rests against the edge of the paper.
4.
General Guidelines for Selecting or Loading Print MediaAttempting to print on damp, curled, wrinkled, or torn paper can cause paper jams and poor print
quality.
Use only high-quality, copier-grade paper for the best print quality.
Avoid paper with embossed lettering, perforations, or a texture that is too smooth or rough. Paper
jams may occur....

During storage, you should use moisture-proof wrap, such as a plastic container or bag, to prevent
dust and moisture from contaminating the paper.
Avoiding Jams and Misfeeds
You can avoid most jams and misfeeds by following these guidelines:
Use paper that follows the printers media guidelines. For more information, see  Loading Paper
.
Make sure that the paper is properly loaded in the input tray.
Do not overload the input tray.
Do not remove paper from the input tray while printing.
Flex, fan, and...

1.
Pull the toner cartridge assembly out of the printer by pulling on the toner cartridge handle.
NOTE: Do not press the button on the toner cartridge assembly.
CAUTION: The inside of the printer might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching it.
2.
Pull the paper out.
3.Install the toner cartridge assembly into the printer.
4.Close the front cover.
5. 

5.
Paper jam not visible
Near the multipurpose feeder
Open the multipurpose feeder door.
1.
Firmly grasp the paper, and gently pull it from the printer.
2.Close the multipurpose feeder door.
3.
Near the paper input tray Remove the paper input tray.
1.Firmly grasp the paper, and gently pull it from the printer.
2. 

2.
Replace the paper input tray.
3.
Near the output bin extender Press the door release button on the right side of the printer to open the front cover.
1.Firmly grasp the paper, and gently pull it from the printer.
2.
Close the front cover.
3.
Near the rear exit Open the rear exit door.
1. 

1.
Firmly grasp the paper, and gently pull it from the printer.
2.Close the rear exit door.
3.
Paper ProblemsMake sure you loaded the paper correctly.
For more information, see  Loading Paper
.
Use only paper recommended for your printer.
For more information, see  Print Media Guidelines
.
Load a smaller amount of paper when printing multiple pages.
For more information, see  Print Media Guidelines
.
Make sure the paper is not wrinkled, torn, or damaged.
Check for a paper jam.
For more information, see...

Printing ProblemsCheck the toner level, and install a new toner cartridge if necessary.
For more information, see  Replacing the Toner Cartridge
.
Free up memory resources on your computer when print speed is slowClose all applications not in use.
Try minimizing the number and size of graphics and images in your document.
Consider purchasing more  Random Access Memory (RAM) for your computer.
Remove fonts that you rarely use from your system.
Uninstall the printer software, and then reinstall it.
Select...