DELL 2150cn User Manual
Here you can view all the pages of manual DELL 2150cn User Manual. The Dell manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 41
Preparing Printer Hardware39 FILE LOCATION: C:\Users\fxstdpc- admin\Desktop\30_UG??\Mioga_SFP_UG_FM\Mioga_SFP_UG_FM\section05.fm DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY 2Close the toner access cover.
Page 42
40Preparing Printer Hardware FILE LOCATION: C:\Users\fxstdpc- admin\Desktop\30_UG??\Mioga_SFP_UG_FM\Mioga_SFP_UG_FM\section05.fm DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY
Page 43
Installing Optional Accessories41 6 Installing Optional Accessories You can make the printer more functional by installing the optional accessories. This chapter describes how to install the printers options such as the memory module and optional 250-sheet feeder. NOTE: The images used and procedures described in this manual are those of Dell™ 2150cn Color Printer. Installing the Optional Memory Module NOTE: Your printer supports additional 512 MB memory module. 1Ensure that the printer is turned...
Page 44
42Installing Optional Accessories 4Align the connector of the memory module with the slot, and insert the memory module into the slot. 5Push the memory module firmly into the slot.
Page 45
Installing Optional Accessories43 NOTE: Ensure that the memory module is firmly fixed in the slot and does not move easily. 6Install the control board cover. NOTE: Insert the upper hinge of the control board cover into the upper slit on the printer. Next, insert the lower hinge of the control board cover into the lower slit of the printer. 7Close the control board cover and turn the screw clockwise.
Page 46
44Installing Optional Accessories 8Turn on the printer. 9Print the printer settings report to confirm that the newly installed memory is detected by the printer. Printing Printer Settings Report When Using the Operator Panel aPress the (Menu) button. bEnsure that Report/List is displayed, and then press the (Set) button. cEnsure that Printer Setting is displayed, and then press the (Set) button. The printer settings report is printed. When Using the Tool Box NOTE: aClick Star t All Programs...
Page 47
Installing Optional Accessories45 The Reports page appears. dClick the Printer Settings button. The printer settings report is printed. 10Confirm the amount of Memory Capacity listed in the printer settings report under General. If the memory capacity has not increased, turn off the printer, unplug the power cable, and re-install the memory module. 11If you installed the optional memory module after installing the printer driver, update your driver by following the instructions for the operating...
Page 48
46Installing Optional Accessories If the printer information is not updated automatically after clicking Get Information from Printer, follow these steps: 1 Click the Options tab, and then select Memory Capacity in the Items list box. 2Select the total amount of the installed printer memory for the memory capacity setting. 3Click Apply, and then click OK. 4Close the Printers and Faxes(, Printers, or Devices and Printers) dialog box. Installing the Optional 250-Sheet Feeder CAUTION: If you install...
Page 49
Installing Optional Accessories47 4Pull the standard 250-sheet tray out of the printer about 200 mm. Hold the standard 250-sheet tray with both hands, and remove it from the printer. 5Lift the printer and align the five guide pins of the optional 250-sheet feeder with the holes at the bottom of the printer. Gently lower the printer onto the optional 250-sheet feeder. CAUTION: Two people are required to lift the printer. The printer should be lifted holding the front and back. Never lift the printer...
Page 50
48Installing Optional Accessories CAUTION: Be careful not to pinch your fingers when lowering the printer onto the optional 250-sheet feeder. 6Secure the optional 250-sheet feeder to the printer by tightening the two screws provided with the feeder, with a coin or similar object. NOTE: The screw hole is located in 216 mm recess from the front of the printer. 7Insert the standard 250-sheet tray into the printer, and push until it stops. 8Re-connect all cables into the back of the printer, and turn...