Dell 2150cdn User Guide

Installing Optional Accessories59
The Wireless Connection window appears.
5Select Wizard, and then click the Next button.
The instruction video starts.
Follow the on-screen instructions to configure wireless settings.
Using Advanced Setup to Configure a Wireless Adapter
You can configure the wireless adapter with the following connection methods:
• Network Cable
• WPS-PIN
• WPS-PBC
• Operator Panel
• Dell Printer Configuration Web Tool
1Insert the Drivers and Utilities CD provided with the printer in...

60Installing Optional Accessories
2Click Guided Setup.
3Click Connect Your Printer.
 

Installing Optional Accessories61
4Select Wireless Connection, and then click the Next button.
The 
Wireless Connection window appears.
For Network, follow the on-screen instructions to configure wireless settings.
1
Select Network Cable, and then click the Next button.
The instruction video starts. 
Follow the on-screen instructions to configure wireless settings, and then 
click the 
Next button.
The 
Advanced Configuration Tool starts.
 

62Installing Optional Accessories
2Select the printer, and then click the Next button.
Wireless Network Settings screen appears.
 NOTE: If the printer cannot detect your printer and your printer is not listed, 
click Enter IP Address button and enter the IP address of your printer, and 
then click the OK button.
3Set the wireless network settings, and then click the Next button.
IP Address Settings screen appears.
 NOTE: For details on each item, see Assigning an IP Address.
4Set the IP address of the...

Installing Optional Accessories63
5Ensure that WPS is displayed, and then press the   (Set) button.
6Press  button until PIN Code appears, and then press the   (Set) 
button.
7Write down the 8-digit PIN code displayed on the panel or press   button 
until 
Print PIN Code appears, and then press the   (Set) button.
The PIN code is printed.
8Ensure that Start Config. is displayed, and then press the   (Set) 
button.
9Ensure that the message Please wait Wireless Setting is 
displayed, and enter the PIN code...

64Installing Optional Accessories
7Press   button until Start appears, and then press the   (Set) button.
8Ensure that the message Please wait Wireless Setting is 
displayed, and start the WPS-PBC on the wireless LAN access point 
(Registrar), within two minutes of the step 7 operation.
 NOTE: For WPS operation on the wireless LAN access point, refer to the 
manual supplied with the wireless LAN access point.
9When the WPS operation is successful and the printer is rebooted, wireless 
LAN connection...

Installing Optional Accessories65
cSelect the transmit key from WEP Key 1 to WEP Key 4.
To use WPA-PSK-TKIP or WPA-PSK-AES encryption:
aPress  button until WPA-PSK-TKIP or WPA-PSK-AES appears, 
and then press the   
(Set) button.
bEnter the passphrase, and then press the   (Set) button.
9Select the encryption type from No Security, WEP (64Bit), and WEP 
(128Bit)
.
When you do not set security for your wireless network:
aEnsure that No Security is displayed, and then press the   (Set) 
button.
To use 64...

66Installing Optional Accessories
Constructing a New Wireless Network Environment for Your Computer 
When you setup your wireless connection first time, the following settings are 
requried on your computer.
For DHCP network:
1Setting up your computer for wireless connectivity:
 NOTE: If your computer provides a wireless adapter tool, change the wireless 
settings using this tool. Or you can change the wireless settings using the tool 
provided with the operating system. See the instructions below.
For...

Installing Optional Accessories67
iClick the Move up button to move the newly added SSID to the top of 
the list.
jClick OK to close the Property dialog box. 
For Windows Vista:
aOpen Control Panel.
bSelect Network and Internet.
cSelect Network and Sharing Center.
dSelect Connect to a network.
eSelect dell_device from the network items listed in Connect to a 
network
.
fSelect Connect Anyway in the warning dialog box indicating you are 
entering an unsecured area.
gClick Close in the dialog box after...

68Installing Optional Accessories
eSelect Connect Anyway in the warning dialog box indicating you are 
entering an unsecured area.
fClick Close in the dialog box after confirming the connection is a 
success.
For Windows Server 2008 R2 and Windows 7:
aOpen Control Panel.
bSelect Network and Internet.
cSelect Network and Sharing Center.
dSelect Connect to a network.
eSelect dell_device from the network items listed in the available 
network list, and click 
Connect.
2Check the IP address assigned by...