Home > Dell > Monitor > Dell 2007wfp Users Guide

Dell 2007wfp Users Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Dell 2007wfp Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 327 Dell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							 
    Notes, Notices, and Cautions  
       
       
       
    Information in this document is subject to change without notice.  
     
    Reproduction in any manner whatsoever without the written permission of Dell Inc.   is strictly forbidden.  
    Trademarks used in this text:  Dell , the  DELL  logo,  Inspiron ,  Dell Precision ,  Dimension ,  OptiPlex ,  Latitude, PowerEdge, PowerVault, PowerApp, and Dell OpenManage  are trademarks of 
    DellInc;   Microsoft, Windows,  and  Windows   NT  are registered trademarks of Microsoft Corporation;   Adobe  is a trademark of Adobe Systems Incorporated, which may be registered in 
    certain jurisdictions.  ENERGY STAR  is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product 
    meets the ENERGY STAR guidelines for energy efficiency.    
    Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any 
    proprietary interest in trademarks and trade names other than its own.  
    Model 2007FP  
    March 2006      Rev.  A03  
       About Your Monitor  
    Front View  
    Back View  
    Side View  
    Bottom View  
    Monitor Specifications  
    Universal Serial Bus (USB) Interface  
    Plug and play capability  
    Caring for Your Monitor  
    Using Your Adjustable Monitor Stand  
    Attaching the Stand  
    Organizing Your Cables  
    Using the Tilt, Swivel and Vertical Extension  
    Removing the Stand   
    Setting Up Your Monitor  
    Connecting Your Monitor  
    Using the Front Panel Buttons  
    Using the OSD  
    Setting the Optimal Resolution  
    Using the Dell™ Soundbar (Optionalyf  
        Rotating Your Monitor  
    Changing the Rotation of Your Monitor  
    Rotating Your Operating System  
    Solving Problems  
    Monitor Specific Troubleshooting  
    Common Problems  
    Video Problems  
    Product Specific Problems  
    Universal Serial Bus (USB) Specific Problems  
    Dell™ Soundbar (Optionalyf7URXEOHVKRRWLQg  
    Appendix  
    FCC Identification Information  
    Safety Instructions  
    Contacting Dell  
       
       
        
    NOTE:  A NOTE indicates important information that helps you make better use of your computer. 
    NOTICE:  A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. 
      CAUTION:  A CAUTION indicates a potential for property damage, personal injury, or death.  
    						
    							Back to Contents Page    
      
    About Your Monitor   
     
    Front View  
       
         
            
    Back View  
         Front View  
       Back View  
       Side View  
       Bottom View      Monitor Specifications  
       Universal Serial Bus (USB) Interface  
       Plug and play capability  
       Caring for Your Monitor  
    1 Input indicators  
    2  Input Source Select  
    3 OSD Menu / Select   
    4 Down ( - )  
    5 Up (+)    
    6   Power button (with power light indicator)    
    						
    							 
     
    Side View  
                     
                                                               1 VESA mounting holes (100mm)  
    (Behind attached base plate)   Use to mount the monitor.  
       
    2  Connectors label Indicate the positions and types of connectors.
    3 Barcode serial number label Refer to this label if you need to contact Dell for 
    technical support.
    4 Security lock slot Use a security lock with the slot to help secure your 
    monitor.
    5 Monitor Lock/Release Button Press to release the stand from the monitor.
    6   Regulatory rating label List the regulatory approvals.
    7   Dell Soundbar mounting brackets Attach the optional Dell Soundbar.
    8   Lock down/release button  
        Push the monitor down, press the button to unlock 
    the monitor,   and then lift the monitor to the desired 
    height.  
    9   Cable management hole Help organize cables by placing them through the 
    hole.  
    						
    							                           
                                                                Left side  
    Bottom View    
     
       
    Monitor Specifications  1 USB downstream ports
    1 AC power cord connector  
    2 DVI connector  
    3 VGA connector  
    4 Composite video connector  
    5 S - Video connector
    6 USB upstream port  
    7 USB downstream ports  
    8 DC power connector for Dell™ Soundbar  
    General  
    Model number 2007FP
    Flat Panel  
    Screen type Active matrix  -  TFT LCD  
    						
    							Screen dimensions 20.1 inches (20.1 - inch viewable image size)
    Preset display area:
    Horizontal   408 mm (16.1 inches)
    Vertical   306 mm (12.1 inches)
    Pixel pitch 0.255 mm
    Viewing angle +/ -   89° (verticalyfW\S/ -   89° (horizontalyfW\p  
    Luminance output 300 cd/m  ² ( typ)  
    Contrast ratio 800:1 (typ)  
    Faceplate coating Antiglare with hard - coating 3H  
    Backlight CCFL (6) edgelight system
    Response Time 16ms typical  
    Resolution  
    Horizontal scan range 30 kHz to 81 kHz (automatic)
    Vertical scan range 56 Hz to 76 Hz, exception 1600 x 1200 at 60 Hz only
    Optimal preset resolution 1600 x 1200 at 60 Hz  
    Highest preset resolution 1600 x 1200 at 60 Hz  
    Video Supported Modes  
    Video display capabilities (DVI playback)  480p/576p/720p 
    Video display capabilities (Composite playback)  NTSC/PAL 
    Video display capabilities (S - Video playback)   NTSC/PAL 
    Preset Display Modes  
    Dell™ guarantees image size and centering for all preset modes listed in the following table.  
    Display Mode Horizontal Frequency 
    (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity 
    (Horizontal/Vertical)
    VGA, 720 x 400 31.5 70.1 28.3 - /+
    VGA, 640 x 480 31.5 59.9 25.2 - / -
    VESA, 640 x 480 37.5 75.0 31.5 - / -
    VESA, 800 x 600 37.9 60.3 40.0 +/+
    VESA, 800 x 600 46.9 75.0 49.5 +/+
    VESA, 1024 x 768 48.4 60.0 65.0 - / -
    VESA, 1024 x 768 60.0 75.0 78.8 +/+
    VESA, 1152 x 864 67.5 75.0 108.0 +/+
    VESA, 1280 x 1024 64.0 60.0 108.0 +/+
    VESA, 1280 x 1024 80.0 75.0 135.0 +/+
    VESA, 1600 x 1200 75.0 60.0 162.0 +/+
    Electrical  
    Video input signals Analog RGB, 0.7 Volts +/ - 5ybRKPLQSXWLPSHGDQFH   
    Digital DVI - D TMDS, 600mV for each differential line, 50 ohm input 
    impedance  
    S - video, Y input  1 volt(p - p), C input 0.286 volt(p - p), 75 ohm input 
    impedance  
    Composite, 1 volt(p - p), 75 ohm input impedance  
    Synchronization input signals separate horizontal and vertical,   
    3.3V CMOS or 5V TTL level, positive or negative sync.  
    SOG (Sync on green)  
    AC input voltage / frequency / current 100 to 240 VAC / 50 or 60 Hz  +  3 Hz / 2.0A (Max.)
    Inrush current 120V: 40A (Max.)  
    240V: 80A (Max.)  
    Physical  Characteristics    
    						
    							Power Management Modes  
    If you have VESAs DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in 
    use. This is referred to as Power Save Mode*. If activity from keyboard, mouse or other input devices is detected by the computer, the monitor will 
    automatically wake up. The following table shows the power consumption and signaling of this automatic power saving feature:   
    * Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.  
       
       
    Pin Assignments  Signal cable type D - sub: Detachable, Analog, 15pin, shipped attached to the monitor  
    DVI - D: Detachable, Digital, 24pin, shipped detached from the 
    monitor  
    S - video: Not included with display   
    Composite: Not included with display  
    Dimensions (with stand):
    Height (fully extended in portrait mode)   547.6 mm (21.6 inches)
    Height (compressed/locked in landscape mode)   367 mm (14.5 inches)
    Width   445.3 mm (17.5 inches)
    Depth   193.50 mm (  7.6 inchesyf
    Weight 
    Monitor (Stand and Head)   6.9 Kg (15.2 lb)
    Monitor Flat panel only (VESA Mode)   5.2 Kg (11.5 lb)
    Weight with packaging   9.6 Kg (21.2 lb)
    Environmental  
    Temperature:
    Operating   5° to 35°C (41° to 95°Fyf
    Non - operating   Storage: 0° to 60°C (32° to 140°Fyf  
    Shipping:  - 20° to 60°C( - 4° to 140°Fyf
    Humidity:
    Operating   10% to 80% (non - condensing)
    Non - operating   Storage: 5% to 90% (non - condensing)  
    Shipping: 5% to 90%(non - condensing)
    Altitude:
    Operating   3,657.6 m (12,000 ft) max
    Non - operating   12,192 m (40,000 ft) max
    Thermal dissipation 256.0  BTU/hour (maximum)  
    187.66 BTU/hour (typical)
    VESA Modes     Horizontal Sync     Vertical Sync    Video     Power Indicator     Power Consumption    
    Normal 
    operation Active Active Active  Green 75W (maximum)*  
    55W (normal)**
    Active - off mode Inactive Inactive Blanked Amber Less than 2 W  
    Switch off -   -   -   Off Less than 1 W (at 230 V)
            * With Audio + USB  
          ** Without Audio + USB  
      
    This monitor is  ENERGY STAR ® - compliant as well as TCO 99/ TCO 03 power management compatible.  
    						
    							VGA Connector  
     
       
     
      
    Pin Number  
    15 - pin Side of the Co nnected Signal Cable
    1 Video - Red  
    2 Video - Green
    3 Video - Blue
    4 GND
    5 Self - test
    6 GND - R
    7 GND - G
    8 GND - B
    9 Computer 5V/3.3V  
    10 GND - sync
    11 GND
    12 DDC data
    13 H - sync
    14 V - sync
    15 DDC clock
     
    Pin Number  
    24 - pin Side of th e C o nnected  Signal Cable
    1 TMDS RX2 -
    2 TMDS RX2+
    3 TMDS Ground
    4 Floating
    5 Floating
    6 DDC Clock
    7 DDC Data
    8 Floating
    9 TMDS RX1 -
    10 TMDS RX1+
    11 TMDS Ground
    12 Floating
    13 Floating  
    						
    							S - video Connector   
              
    Composite  V ideo Connector  
     
    Universal Serial Bus (USB) Interface  
        
    USB Upstream  C onnector  14 +5V / +3.3V power  
    15 Self test 
    16 Hot Plug Detect
    17 TMDS RX0 -
    18 TMDS RX0+
    19 TMDS Ground
    20 Floating
    21 Floating
    22 TMDS Ground
    23 TMDS Clock+
    24 TMDS Clock -
     
    Pin Number  
    5 - pin Side of the C o nnected  Signal 
    Cable (Cable not included)
    1 GND
    2 GND
    3 LUMA
    4 CHROMA
    5 GND
    Pin Number 1 - p in Side of the C onnected  Signal Cable (cable not included)
    1 LUMA COMPOSITE CHROMA
    This monitor supports High - Speed Certified USB 2.0 interface.
     
     
       Data Rate  Power Consumption
    High speed  480 Mbps  2.5W (Max., each portyf
    Full speed  12 Mbps  2.5W (Max., each portyf
    Low speed  1.5 Mbps  2.5W (Max., each portyf  
    						
    							   
        
    USB Downstream  C onnector  
       
        
    USB  P orts    
    l 1 upstream  -  rear   
    l 4 downstream  -  2 on rear; 2 on left side  
       
    Plug and Play Capability  
    You can install the monitor in any Plug and Play - compatible system. The monitor automatically provides the computer system with its Extended Display 
    Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. If desired, the user 
    can select different settings, but in most cases monitor installation is automatic.  
    Caring for Your Monitor  
    l To clean your antistatic screen, lightly dampen a soft, clean cloth with water. If possible, use a special screen - cleaning tissue or solution suitable for the 
    antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.   
    l Use a lightly - dampened, warm cloth to clean the plastics. Avoid using detergent of any kind as some detergents leave a milky film on the plastics.    
    l If you notice a white powder when you unpack your monitor, wipe it off with a cloth. This white powder occurs during the shipping of the monitor.   
    l Handle your monitor with care as darker - colored plastics may scratch and show white scuff marks more than lighter - colored monitor.    
    l To help maintain the best image quality on your monitor, use a dynamically changing screen saver and power off your monitor when not in use.   
    Back to Contents Page  
         
    Pin Number  
    4 - pin Side of the connector
    1 DMU
    2 VCC
    3 DPU
    4 GND
     
    Pin Number  
    4 - Pin Side of the Signal Cable
    1 VCC
    2 DMD
    3 DPD
    4 GND
    NOTE:  USB 2.0 capability requires 2.0 capable computer  
    NOTE:  The monitors USB interface works only when the monitor is on or in power save mode, If you switch the monitor off and then on,   
    attached peripherals may take a few seconds to resume normal functionality.   
    CAUTION:   Read and follow the  safety instructions  before cleaning the monitor. 
    CAUTION:   Before cleaning the monitor, unplug the monitor power cable from the electrical outlet.   
    						
    All Dell manuals Comments (0)

    Related Manuals for Dell 2007wfp Users Guide