DELL 1355cn User Manual

Understanding the Printer Menus399
Auto Regi Adjust
Purpose: 
To specify whether to automatically adjust color registration.
Va l u e s :
Adjust ColorRegi
Purpose:
To automatically adjust color registration.
Color registration adjustment need to be made during the initial setup of the 
printer or when the printer is moved to a different location.
 NOTE: This item is available only when Auto Regi Adjust is set to Off.
Clean Developer
Purpose:
To rotate the developer motor and stir the toner in the toner...

400Understanding the Printer Menus
BTR Refresh
Purpose:
Specify whether to execute counter measures for curling/separating discharge 
of the paper.
Va l u e s :
Initialize NVM
Purpose:
To initialize NVM (non-volatile memory) for system parameters, Address 
Book data for fax, or Address Book data for e-mail. After executing this 
function and rebooting the printer, the menu parameters or data are reset to 
their default values.
Va l u e s :
Magenta YesCleans the toner in the magenta toner cartridge....

Understanding the Printer Menus401
Non-Dell Toner
Purpose:
To use toner cartridge of another manufacturer.
 NOTE: Using non-Dell-brand toner cartridges may make some printer features 
unusable, reduce print quality and decrease the reliability of your printer. Dell 
recommends only new Dell-brand toner cartridges for your printer. Dell does not 
provide warranty coverage for problems caused by using accessories, parts, or 
components not supplied by Dell.
 
NOTE: Before you use toner cartridge of another...

402Understanding the Printer Menus
Secure Settings
Use the Secure Settings menu to set a password to limit access to the 
menus. This prevents items from being changed accidentally.
 NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Panel Lock
Purpose:
To restrict access to Admin Menu with a password.
For details see Panel Lock Function on page 405.
 NOTE: You can select Disable for Panel Lock Set when all items under Function 
Enabled are set to On and Secure Receive Set is...

Understanding the Printer Menus403
Secure Receive
Purpose:
To specify whether to require a password to print incoming faxes, and to set or 
change the password. When Secure Receive Set is set to Enable, the 
printer stores incoming faxes and prints them when the correct password is 
entered on the operator panel.
 NOTE: You can access to the items under Secure Receive Set only 
when 
Panel Lock Set is set to Enable. Copy OnEnables the Copy service.
OffDisables the Copy service.
On 
(Password)Enables the...

404Understanding the Printer Menus
Va l u e s :
Scan to EMail
Use the Scan to EMail menu to edit the transmission source.
 NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Edit From Field
USB Settings
Use the USB Settings menu to change printer settings affecting a USB 
port.
 NOTE: Values marked by an asterisk (*) are the factory default menu settings.
USB Port
Purpose:
To enable or disable the USB interface. The change becomes effective after 
the printer is turned off and...

Understanding the Printer Menus405
Panel Language
Purpose:
To specify the language to be used on the operator panel.
Va l u e s :
Panel Lock Function
This feature prevents unauthorized users from changing settings made by the 
administrator. However, you can select settings for individual print jobs using 
the printer driver.
Enabling the Panel Lock
1Press the   (Menu) button.
2Press the   button until System is highlighted, and then press the   
button.
3Press the   button until Admin Menu is...

406Understanding the Printer Menus
7Press the   button until Enable is highlighted, and then press the   
button.
 NOTE: The factory-default panel password is 0000.
 
NOTE: Be sure to remember the password. The procedure described below 
allows you to reset the password, but the settings for Address Book and 
Phone Book are cleared.
•Turn off the printer. Then, while holding the   (Menu) button, turn on 
the printer.
 
NOTE: If you change the password while Panel Lock is Enable, perform 
steps 1 to 5....

Understanding the Printer Menus407
Resetting Defaults
After executing this function and rebooting the printer, the menu parameters 
or data are reset to their default values.
1
Press the   (Menu) button.
2Press the   button until System is highlighted, and then press the   
button.
3Press the   button until Admin Menu is highlighted, and then press the 
 button.
4Press the   button until Maintenance is highlighted, and then press 
the  button.
5Press the   button until Initialize NVM is highlighted, and...

408Understanding the Printer Menus