DELL 1355cn User Manual

Loading Print Media219
3Stack the prints and set them as they are (with the blank side facing up) 
into the MPF. Ensure that 
Insert Output into paper tray is 
highlighted, and then press the   button. Print pages in the order page 1 
(rear of page 2), page 3 (rear of page 4), then page 5 (rear of page 6).
 NOTE: Printing on both sides of the paper is not possible if the document 
consists of various sizes of papers.
The Priority Sheet Inserter (PSI)
1First print the even pages.
For a six page document,...

220Loading Print Media
2After the even pages are printed, remove the paper stack from the output 
tray and set them as they are (with the blank side facing up).
 NOTE: Warped or curled prints can cause paper jams. Straighten them 
before setting them.
3Next stack the prints and set them as they are (with the blank side face up) 
into the PSI. Ensure that 
Insert Output into paper tray is 
highlighted, and then press the   button. Print pages in the order page 1 
(rear of page 2), page 3 (rear of page 4),...

Loading Print Media221
 NOTE: Printing on both sides of the paper is not possible if the document 
consists of various sizes of papers.
Using the Output Tray Extension
The output tray extension is designed to prevent print media from falling 
from the printer after the print job is complete.
Before printing a document, ensure that the output tray extension is fully 
extended.
 NOTE: When you pull out envelopes or small size print media, lift up the scanner 
unit.
 

222Loading Print Media
 

Operator Panel223
14
Operator Panel
Using the Operator Panel Buttons
The operator panel has a 4-line by 28-character liquid crystal display (LCD), 
light-emitting diodes (LED), control buttons, and numeric keypad, which 
allow you to control the printer.
1
One Touch Dial button
• Calls up the stored Fax number registered in the Phone Book. The 
first four fax numbers in the Phone Book are assigned to the buttons 
in row order, starting from the top corner.
2 (Copy) button
• Moves to the top level of the...

224Operator Panel
6 button
• Moves a cursor or highlight right or left. 
7 button
• Moves a cursor or highlight up or down. 
8 (Set) button
• Confirms the entry of values. 
9 (Contacts) button
• Moves to the Address Book menu for the Fax and Scan services.
10 (Re-dial / Pause) button
• Re-dials a telephone number. 
• Pauses a telephone number.
11 (Cancel) button
• Cancels the current processing or pending job.
12B&W / Color LED
• Lights up to indicate which color mode is selected.
13 (Color Mode) button...

Operator Panel225
20LCD Panel
• Displays various settings, instructions, and error messages. 
21 (Scan) button
• Moves to the top level of the Scan menu. 
22 (Menu) button
• Moves to the top level of the Print From USB Memory, Job Status, and 
System menus.
 NOTE: Moving to a different menu or returning to a previous screen cancels the 
current entry or setting. Make sure to press the   button to save the current 
entry or setting. 
 
NOTE: For details on how to use the numeric keypad to enter...

226Operator Panel
The Tool Box opens.
2Click the Printer Settings Report tab.
3Select Reports from the list at the left side of the page.
The 
Reports page is displayed.
4Click the Pa n e l  S e t t i n g s button.
The panel settings page is printed.
 

227
Printing, Copying, 
Scanning, and Faxing
 

228