Dell 1350cnw User Guide

Loading Paper47
7Before loading the print media, flex the sheets back and forth, and then 
fan them. Straighten the edges of  the stack on a level surface.
8Load print media on the MPF with the top edge first and with the 
recommended print side facing up.
9Adjust the width guides until they re st lightly against the edges of the 
stack of print media.
 

48Loading Paper
10Slide the length guide towards the printer until it touches the print media.
 NOTE: Depending on the size of print media, first slide the length guide 
backward until it stops, and then slide the MPF extension until it touches print 
media.
 

Loading Paper49
11Insert the PSI into the printer and then align the PSI to the marking on 
the paper tray.
12Select the paper type from the printer driver if the loaded print media is 
not standard plain paper. If a user-specified print media is loaded in the 
MPF, you must specify the paper size  setting by using the printer driver.
 

50Loading Paper
Loading Print Media in the Priority Sheet Inserter 
(PSI)
1Open the front cover.
2Slide the PSI forward, and then align the PSI to the marking on the paper 
tray.
3Before loading the print media, flex  the sheets back and forth, and then 
fan them. Straighten the edges of the stack on a level surface.
 

Loading Paper51
4Load print media on the PSI with the top edge first and with the 
recommended print side facing up.
5Adjust the width guides until they rest lightly against the edges of the 
stack of print media.
6Select the paper type from the printer driver if the loaded print media is 
not standard plain paper. If a user-specified print media is loaded in the 
PSI, you must specify the paper size  setting by using the printer driver.
 

52Loading Paper
 

Installing Printer Drivers on Computers Running Windows
8
Installing Printer Drivers on 
Computers Running Windows
Identifying Printer Driver  Pre-install Status (For 
Network Connection Setup)
Before installing the printer driver  on your computer, print the printer 
settings page to check the IP address of your printer.
The Operator Panel
1Press the   (Menu) button.
2Ensure that Report/List appears, and then press the   button.
3Ensure that Printer Setting appears, and then press the   button.
The...

54Installing Printer Drivers on Computers Running Windows
2Select TCP/IP Settings from the list on the left side of the page.
The 
TCP/IP Settings page appears.
If the IP address shows  0.0.0.0 (the factory default) or 169.254.xx.xx , 
an IP address has not been assigned. To assign one for your printer, see 
Assigning an IP Address (f or IPv4 mode) on page 39.
Disabling the firewall before installing your printer
 NOTE: For Windows XP, Service Pack 2 or 3 must be installed.
If you are running one of the...

Installing Printer Drivers on Computers Running Windows55
Direct Connection Setup
For installing host-based printer driver
1Click Software Installation.
2Select Personal Installation, and then click Next.
3Follow the on-screen instructions to  connect the computer and the printer 
with a USB cable, and th en turn the printer on.
The Plug and Play installation starts  and the installation software proceeds 
to the next page automatically.
 NOTE: If the installation software does not automatically proceed...

56Installing Printer Drivers on Computers Running Windows
8Click OK.
9Select your printer name and click Next. 
10To change the printer name, enter the printer name in the Printer name 
box. To use this printer as the de fault printer, select the check box 
displayed under the 
Printer name. Click Next.
Installation starts.
If the 
User Account Control dialog box appears, click Continue.
 NOTE: If you are an administrator on the computer, click  Continue; otherwise, 
contact your administrator to...