DELL 1320c User Manual

   
5. Use the small gray tabs to place the PHD unit back into the printer completely.  
 
 
   
6. Turn the four PHD lock levers clockwise to lock the PHD, and then remove the protective sheet.  
 
 
   
7. Close the front cover.  
 
 
   
   
back to contents page    

back to contents page  
Connecting Your Printer   
   
   Choosing the Right Cable  
   Connecting the Printer Directly to a Computer  
   Turn On the Printer  
   Connecting the Printer to a Network  
   Using the Reset button  
Choosing the Right Cable  
   
Your Dell™ Color Laser Printer 1320c interconnection cable must meet the following requirements:  
 
 
   
 
Connecting the Printer Directly to a Computer  
   
A local printer is a printer attached to your computer using a USB cable. If your...

Microsoft ®
  Windows ®
  2000, Windows XP, Windows XP 64 - bit Edition, Windows Server ®
  2003, Windows Server 2008, Windows Vista ®
,  and Windows Vista 64 -
bit Edition support USB connections. See your computer operating system documentation to see if your system supports USB.  
   
To attach the printer to a computer:  
1. Ensure that the printer, computer, and any other attached devices are turned off and unplugged.  
 
2. Connect the printer to the computer using a USB.  
 
 
   
 
   
A USB port...

   
To attach the printer to a network:  
1. Ensure that the printer, computer, and any other attached devices are turned off and unplugged.  
 
2. Remove the network cover.  
 
 
   
3. Insert the Network Adapter for Dell 1320c.  
 
 
   
4. Connect the printer to the network using an Ethernet cable.  
 
 
   
 
   
To connect the printer to the network, plug one end of an Ethernet cable into the Ethernet port on the back of the printer, and the other end into a LAN drop 
or hub.  NOTE:  If your printer...

Turn On the Printer  
1. Plug one end of the printer power cable into the socket at the back of the printer and the other end into a properly grounded outlet.  
 
 
   
2. Turn on the computer and the printer.  
 
Print and Check the Printer Settings Page  
   
Print the Printer Settings page.   
   
When the Ready/Data indicator lights (ready status), press and hold the Continue button on the printers operator panel until the Ready/Data indicator blinks.  
Advanced Funtions  
1. Click  Start ®   All...

 
5. Select TCP/IP Settings from the list at the left side of the page.  
The  TCP/IP Settings  page is displayed.  
 
6. Select the mode from IP Address Mode, and then enter the values in IP Address, Subnet Mask, and Gateway Address.  
 
7. Press the  Apply New Settings  button to take effect.  
 
   
   
You can also assign the IP address to the printer when installing the printer drivers with installer. When you use the  Network Installation  feature, you can 
set the IP address from 0.0.0.0 to the...

back to contents page  
Dell Printer Configuration Web Tool   
   
   Using the Dell Printer Configuration Web Tool  
   
One of the features of the   is E - Mail Alert Setup, which sends an e - mail to you or the key operator when the printer 
needs supplies or intervention.  
   
To fill out printer inventory reports requiring the asset tag number of all the printers in your area, use the  Printer Information  feature in the  Dell Printer 
Configuration Web Tool . Just type the IP address of each...

2. Click  Dell Color Laser 1320c  listed in Printer Name.  
The  Dell Color Laser 1320c Launcher  window opens.  
 
3. Click the  Tool Box  button.  
The  Tool Box  opens.  
You can also launch the  Tool Box  from the printer icon on the taskbar.  
 
4. Click the  Printer Maintenance  tab.  
 
5. Select EWS (Embedded Web Server or Dell Printer Configuration Web Tool) from the list on the left side of the page.  
The EWS page is displayed.  
 
6. Press the  Print Server Settings  button.  
The printer...

Use the  Set Password  menu to lock the  Dell Printer Configuration Web Tool  with a password so that other users do not inadvertently change the printer 
settings you selected.  
Online Help  
   
Click  Online Help   to visit the Dell Support website, and see the  Users Guide  on that page to verify configured settings.  
Order Supplies at:  
   
www.dell.com/supplies  
Contact Dell Support at:  
   
support.dell.com  
Using the Dell Printer Configuration Web Tool  
   
Ensure that you activate...

3. Click  Edit Languages  in the  General  tab.  
 
4. Specify the display language in order of preference in the  Languages in order of preference  list.  
 
For example:  
English [en]  or  English/United States [en - us]  
Italian [it]  
Spanish [es]  
German [de]  
French [fr]  
Dutch [nl]  
Norwegian [no]  
Swedish [sv]  
Setting the Printers IP Address to Non - Proxy  
1. Select  Options  from the  Tools  menu.  
 
2. Click  General  on the  Options  dialog box.  
 
3. Click  Connection Settings ®...