DELL 1133 User Manual

4.  Wipe the underside  of the scanner  lid  and  white bar until it  is clean and  dry.
5 .  Close  the scanner  lid.
Storing the Toner cartridge
Toner cartridges  are sensitive to  light, temperature, and  humidity.  Follow these recommendations to  ensure optimum
performance, highest  quality,  and  longest life from  your  new Dell toner cartridge.
Store this cartridge in the same  environment  as the printer it  will be used in;  this should be in controlled office
temperature  and  humidity...

Basic setup
After installation is complete,  you may want  to  set  the machine’s  default settings. Refer to  the next section if you would
like to  set  or change  values. This chapter gives  you step-by-step instructions for setting  up  the machine.
This chapter includes:
Altitude adjustment
Changing the display  language
Using the save modes
Setting  the default tray  and  paper
Setting  job timeout
Altitude adjustment
The  print  quality is affected by atmospheric  pressure, which is determined by...

1.  Press   Menu () on the control panel.
2 .  Press  the left/right  arrow until System Setup  appears and  press  OK.
3 .  Press  the left/right  arrow until Machine Setup  appears and  press  OK.
4 .  Press  the left/right  arrow until Toner Save  appears and  press  OK.
5 .  Press  the left/right  arrow until On  appears and  press  OK.
6 .  Press   Stop/Clear  (
) to  return  to  ready  mode.
When  PC-printing, you can  also  turn  on or off toner save mode in the printer properties.
Using the power...

2.  For  Windows 2000, select  Settings > Printers .
For  Windows XP/Server 2003, select Printers and Faxes .
For  Windows Server 2008/Vista,  select Control  Panel > Hardware  and Sound  > Printers .
For  Windows 7, select Control  Panel  > Hardware  and Sound  > Devices and Printers .
For  Windows Server 2008 R2,  select  Control  Panel > Hardware  > Devices and Printers .
3 .  Right-click  your  machine.
4 .  For  Windows XP/Server 2003/Server 2008/Vista,  press   Printing Preferences.
For  Windows 7...

Copying
This chapter gives  you step-by-step instructions for copying documents.
This chapter includes:
Basic  copy
Changing the settings for each  copy
Changing the default copy  settings
Using special copy  features
Deciding the form  of copy  output
Setting  copy  timeout
Basic copy
This is the normal  and  usual procedure for copying your  originals.1.  Press   Menu (
) on the control panel.
2 .  Press  the left/right  arrow until Copy  Feature  appears and  press  OK.
3 .  Place  a  single  original...

4.  Press  the left/right  arrow until the image mode you want  appears and  press   OK.
Text : Use  for originals containing  mostly  text.
Text/Photo : Use  for originals with mixed text and  photographs.
Photo: Use  when  the originals are photographs.
5 .  Press   Stop/Clear  (
) to  return  to  ready  mode.
Reducing or enlarging copies
By  using  the Reduce/Enlarge  () button, you can  reduce or enlarge the size of a  copied image from  25%  to
400% when  you copy  original documents from  the...

2.  Place Front  Side and Press [Start]  appears on the display.
3 .  Place  the front side  of an original facing  down  on the scanner  glass where arrows indicate as shown, and  close
the scanner  lid.
4.  Press   OK on the control panel.
Your  machine begins  scanning  the front side  and  shows   Place Back  Side and Press [Start].
5 .  Turn the original over and  place  it  on the scanner  glass, where arrows indicate as shown then, close  the
scanner  lid.
6.  Press   OK on the control panel to...

6.  Press   Start () on the control panel to  begin copying.
Your  original is divided  into 9 portions.  Each portion is scanned and  printed one  by one  in the following order:
Clone copying
The  machine prints multiple original images  on a  single  page. The  number of images  is automatically determined by
the original image and  the paper size.
1.  Press   Menu () on the control panel.
2 .  Press  the left/right  arrow until Copy  Feature  appears and  press  OK.
3 .  Press  the left/right  arrow...

Off: Prints output sorted  into stacks of individual pages.
8.  Press   Stop/Clear  () to  return  to  ready  mode.
9 .  Press   Start (
) to  begin copying.
One  complete  document will print  followed by the second  complete  document.
Setting copy timeout
You  can  set  the time the machine waits  before it  restores  the default copy  settings, if you do not start  copying after
changing them  on the control panel. 1.  Press   Menu (
) on the control panel.
2 .  Press  the left/right  arrow until...