DELL 1133 User Manual

If  the entire  page  is light, the print  resolution setting  is too  low  or the
toner save mode is on.  Adjust  the print  resolution and  turn  the toner save
mode off.  See the help screen of the printer driver.
A  combination of faded or smeared  defects  may indicate that  the toner
cartridge needs cleaning (See 
Cleaning the inside).
The  surface of the LSU part inside  the machine may be dirty (See Cleaning
the inside).
Toner specks
The  paper may not meet specifications; for example, the paper...

The  toner cartridge may be damaged.  If  you still have  the same  problem,
remove the toner cartridge and, install a  new one  (See 
Replacing  the toner
cartridge).
Parts of the machine may have  toner on them. If  the defects  occur on the
back  of the page, the problem will likely  correct itself after a  few  more
pages.
The  fusing assembly may be damaged.  Contact  a  service  representative.
Background  scatter
Background  scatter results  from  bits of toner randomly distributed on the
printed...

Loose tonerClean the inside  of the machine (See Cleaning the inside).
Check the paper type and  quality (See Print media specifications  ).
Remove the toner cartridge and  then, install a  new one  (See Replacing  the
toner cartridge).
If  the problem persists, the machine may require repair. Contact  a  service
representative.
Character Voids
Character voids are white areas within  parts of characters that  should be solid
black:
If  you are using  transparencies, try another type of transparency....

Check for copy  paper or pieces of copy  paper remaining in the machine
after a  paper jam  has  been  cleared.
Toner cartridge produces fewer
copies than  expected before running
out of toner.
Your  originals may contain pictures,  solids,  or heavy  lines. For  example,
your  originals may be forms, newsletters, books, or other documents
that  use more  toner.
The  scanner  lid  may be left  open while  copies are being made.
Turn the machine off and  back  on.
Scanning problems
Condition Suggested...

“Exception OE ”, “Spool 32 ”, or
“ Illegal  Operation ” messages
appear.
“Fail  To Print”, “A printer timeout
error occurred” messages appear. These messages may appear during printing. Just  keep waiting until the
machine finishes printing. If  the message  appears in standby mode or after
printing has  been  completed, check  the connection  and/or  whether  an error
has  occurred.
Refer to  Microsoft Windows User’s Guide that  came  with your  computer  for further information  on Windows
error...

appear on
the
scanners
list.Ensure  the scanner  driver  for your  machine is installed  in your  system. Open Unified Linux  Driver
configurator, switch to  Scanners configuration ,  then  press  Drivers.  Make sure  that  driver  with
a  name corresponding  to  your  machines  name is listed  in the window.
Ensure  the port is not busy. Since functional  components  of machine (printer and  scanner) share
the same  I/O interface (port), the situation of simultaneous access  of different user...

Glossary
The  following glossary helps you get  familiar  with the product by understanding the terminologies commonly  used
with printing as well as mentioned in this user’s guide.
802.11 802.11 is a  set  of standards  for wireless  local  area network (WLAN) communication,  developed by the IEEE
LAN/MAN Standards  Committee  (IEEE  802).
802.11b/g 802.11b/g can  share  the same  hardware and  use the 2.4 GHz band.  802.11b supports  bandwidth up  to  11  Mbps;
802.11g up  to  54  Mbps. 802.11b/g...

CoverageIt is the printing term used for a  toner usage measurement  on printing. For  example, 5% coverage means that  an
A4 sided paper has  about  5% image or text on it.  So, if the paper or original has  complicated  images  or lots of
text on it,  the coverage will be higher  and  at the same  time,  a  toner usage will be as much  as the coverage.
CSV Comma  Separated Values (CSV).  A  type of file format, CSV is used to  exchange data between  disparate
applications. The  file format, as it  is...

EmulationEmulation  is a  technique of one  machine obtaining the same  results  as another.
An emulator  duplicates the functions of one  system  with a  different system, so that  the second  system  behaves
like the first system. Emulation  focuses on exact reproduction  of external  behavior, which is in contrast  to
simulation, which concerns an abstract model of the system  being simulated,  often considering its  internal state.
Ethernet Ethernet is a  frame -based computer  networking  technology...

system  to  securely share  part of an organizations information  or operations with its  employees. Sometimes the
term refers  only  to  the most visible service, the internal website.
IP  address An Internet  Protocol (IP)  address is a  unique number that  devices use in order  to  identify and  communicate with
each  other on a  network utilizing the Internet  Protocol standard.
IPM The  Images Per Minute (IPM)  is a  way  of measuring  the speed of a  printer. An IPM rate  indicates  the number of...