DELL 1130n User Manual

5. Close  the front cover.  Ensure  that  the cover is securely closed.
Tips for avoiding paper curls
1. Open the rear cover.
2. Pull down  the pressure  lever on each  side.
1. Pressure lever
Keep  the rear cover opened  during printing.
Only use when  the printout has  more  than  20  mm  curl.
Tips for avoiding paper jams
By  selecting  the correct media types,  most paper jams  can  be avoided.  When  a  paper jam  occurs,  refer to  the next
guidelines.
Ensure  that  the adjustable guides  are...

In tray
Click  this link  to  open an animation about  clearing  a  jam.
1. Open and  close  the front cover.  The  jammed  paper is automatically ejected  from  the machine.
If  the paper does  not exit, go to  the next step.
2. Pull out tray.
3. Remove the jammed  paper by gently  pulling  it  straight out.
If  the paper does  not move  when  you pull,  or if you do not see the paper in this area,  check  the fuser  area
around  the toner cartridge.  (See 
Inside the machine.)
4. Insert tray  back...

Inside the machine
Click  this link  to  open an animation about  clearing  a  jam.
The  fuser  area is hot. Take care when  removing paper from  the machine.
1. Open the front cover and  pull the toner cartridge out, lightly pushing  it  down.
2. Remove the jammed  paper by gently  pulling  it  straight out.
3. Replace the toner cartridge and  close  the front cover.  Printing  automatically resumes.
In exit area
Click  this link  to  open an animation about  clearing  a  jam.
1. Open and  close  the...

1. Pressure lever
If  you do not see the jammed  paper, go to  next step.
5. Pull the fuser  cover levers  down  and  remove the paper.
Return the fuser  cover levers  to  their original position.
The  fuser  area is hot. Take care when  removing paper from  the machine.
6. Close  the rear cover.
7. Open and  close  front cover,  printing automatically resumes.
Solving other problems
The  following chart lists some  conditions  that  may occur and  the recommended solutions. Follow the suggested...

For  Network Printing (Dell 1130n  only)
Paper feeding problems
Condition Suggested solutions
Paper  jams  during printing. Clear  the paper jam.  (See 
Clearing paper jams.)
Paper  sticks together.
Check the maximum  paper capacity of the tray. (See Print media specifications .)
Make sure  that  you are using  the correct type of paper. (See Print media
specifications.)
Remove paper from  the tray  and  flex or fan  the paper.
Humid  conditions  may cause some  paper to  stick together.
Multiple sheets...

Paper  is jammed. Clear  the paper jam.  (See Clearing paper jams.)
No  paper is loaded.  Load paper. (See Loading  paper in the tray .)
The  toner cartridge is not installed. Install the toner cartridge.
If  a  system  error occurs,  contact  your  service  representative.
The  connection  cable
between  the computer
and  the machine is not
connected properly. Disconnect the machine cable  and  reconnect  it.
The  connection  cable
between  the computer
and  the machine is
defective. If  possible,...

Pages  print, but they are
blank.The  toner cartridge is
defective or out of toner. Redistribute the toner,  if necessary. If  necessary, replace the
toner cartridge.
The  file may have  blank
pages. Check the file to  ensure that  it  does  not contain blank pages.
Some  parts,  such as the
controller  or the board,
may be defective. Contact  a  service  representative.
The  machine does  not
print  PDF  file correctly.
Some  parts of graphics,
text,  or illustrations are
missing. Incompatibility...

inside  of your  machine.  (See Cleaning the inside.)
The  paper path  may need  cleaning.  (See Cleaning the inside.)
Vertical  lines
If  black  vertical  streaks appear on the page:
The  surface (drum  part) of the toner cartridge inside  the machine has
probably been  scratched. Remove the toner cartridge and  install a  new one.
(See 
Replacing  the toner cartridge .)
If  white vertical  streaks appear on the page:
The  surface of the LSU part inside  the machine may be dirty.  (See Cleaning
the...

Check the paper type and  quality.  Both high temperature  and  humidity can
cause paper curl. (See 
Print media specifications.)
Turn the stack of paper over in the tray. Also  try rotating the paper 180° in
the tray.
Wrinkles or creases
Ensure  that  the paper is loaded properly.
Check the paper type and  quality.  (See Print media specifications .)
Turn the stack of paper over in the tray. Also  try rotating the paper 180° in
the tray.
Back of printouts  are dirty
Check for leaking  toner.  Clean the...

ConditionSuggested solutions
“File  in Use” message  appears
during installation. Exit all software applications. Remove all software from  the startup  group,  then
restart  Windows. Reinstall  the printer driver.
“General  Protection Fault”,
“Exception OE”, “Spool  32”,  or
“Illegal  Operation” messages
appear. Close  all other applications, reboot  Windows and  try printing again.
“Fail  To Print”, “A printer
timeout error occurred”
messages appear. These messages may appear during printing. Just...