Dell 1130 User Guide

After connecting  the machine,  click  Next.
If  you don’t  want  to  connect the printer at this time,  click  Next,  and  No  on the following screen. The
installation starts  and  a  test page  will not print  at the end  of the installation.
The  installation window  in this  user  guide may differ depending on the machine and  interface in use.
5. After the installation is finished,  a  window  asking you to  print  a  test page  appears.  If  you choose to  print  a  test
page, select the checkbox...

14. For  Mac OS X  10.3, if Auto Select does  not work  properly, select Dell in Printer Model  and  your  machine name
in  Model  Name .
For  Mac OS X  10.4, if Auto Select does  not work  properly, select  Dell in Print Using  and  your  machine
name in  Model.
For  Mac OS X  10.5~10.6, if Auto Select does  not work  properly, select  Select  a  driver  to use... and  your
machine name in  Print Using.
Your  machine appears on the  Printer List,  and  is set  as the default machine.
15. Click  Add.
If...

5. When  the installation is complete,  click  Finish.
The  installation program  has  added the Unified Driver  Configurator  desktop icon and  the Unified Driver  group to  the
system  menu  for your  convenience. If  you have  any difficulties, consult the on screen help that  is available  through
your  system  menu  or can  otherwise  be called from  the driver  package Windows applications, such as  Unified Driver
Configurator  or Image Manager .
Installing the driver  in the text mode:
If  you do...

1Host  computer
A  computer  which is directly connected to  the machine by USB  cable.
2 Client computers
Computers which use the machine shared through the host computer.
Windows
Setting up a host computer
1. Install your  printer driver. (See Installing USB  connected machine’s  driver , Installing network connected
machine’s  driver.)
2. Click  the Windows  Start menu.
3. For  Windows 2000, select  Settings > Printers .
For  Windows XP/Server 2003, select  Printers and Faxes.
For  Windows Server...

1. Install your  printer driver. (See Macintosh.)
2. Open the Applications  folder > System Preferences   and  click  Print &  Fax .
3. Click  the “+” icon.
A  display  window  showing  the name of your  shared printer appears.
4. Select your  machine and  click   Add.
 

Network setup (Dell 1130n only)
This chapter gives  you step-by-step instructions for setting  up  the network connected machine and  software.
This chapter includes:
Network  environment
Introducing useful  network programs
Using a  wired network
Installing network connected machine’s  driver
IPv6  Configuration
Network environment
You  need  to  set  up  the network protocols on the machine to  use it  as your  network machine.
The  following table shows  the network environments supported by the...

Printing network configuration report
You  can  print  a  Network Configuration Report  from  the machines  control panel that  will show the current
machine’s  network settings. This will help you to  set  up  a  network and  troubleshooting  problems.
To print the report:
In ready  mode, press  and  hold the 
 (cancel  button) for about  5 seconds. You  can  find your  machine’s  MAC address
and  IP  address.
For  example:
MAC Address : 00:15:99:41:A2:78
IP  Address : 192.0.0.192
Setting IP address...

MAC  Address : Find  the machine’s  MAC address from  the  Network Configuration Report and  enter it
without  the colons.  For  example, 00:15:99:29:51:A8 becomes  0015992951A8.
IP  Address : Enter  a  new IP  address for your  printer.
For  example, if your  computer’s IP  address is 192.168.1.150, enter 192.168.1.X.  (X is number between  1
and  254 other than  the computer’s address.)
Subnet Mask : Enter  a  Subnet Mask.
Default  Gateway : Enter  a  Default Gateway.
6. Click  Apply ,  and  then...

Type  X:\Setup.exe  replacing “X”  with the letter  which represents your  drive  and  click   OK.
If  the  AutoPlay  window  appears in Windows Vista,  Windows 7 and  Windows 2008 Server R2,  click   Run
Setup.exe  in Install or  run  program  field, and  click  Continue or Yes  in the  User Account  Control
windows.
3. Click   Next.
If  necessary, select a  language from  the drop -down  list.
4. Select  Typical installation for  a  network printer .  Then,  click  Next.
The  Custom Installation allows...

If  you do not see your  printer on the list, click  Update to  refresh the list, or select  Add  TCP/IP  Port to  add
your  printer to  the network.  To add  the printer to  the network,  enter the port name and  the IP  address for
the printer.
To verify your  printer’s IP  address,  print  a  Network  Configuration  page. (By pressing the (cancel  button)
for about  5 seconds, then  release. (Example IP  Address is 13.121.52.104)
To find a  shared network printer (UNC Path), select  Shared Printer...