Daewoo Dwd M1031 Instruction Manual
Have a look at the manual Daewoo Dwd M1031 Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 51 Daewoo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
INSTRUCTION MANUAL DWD-M1031 Washing Machine Instruction Manual CONTENTSPage A NOTE TO YOU Thank you for buying a DAEWOO appliance. DAEWOO washers are easy to use, save time, and help you manage your home better. This manual contains valuable information about how to operate and maintain your washer properly and safely. Please read it carefully. Economic washing system The washing machine determines the water level and washing time automatically by sensing the amount of laundry and water temperature in order to minimize energy and water consumption. Low noise system The washing machine minimizes the spinning noise level by sensing the amount of unbalance of laundry. Nano-silver sterilization washing(Option) By applying very fine silver particles on essential parts inside, the washer sterilizes up to 99.9% as is done by boiling wash. PARTS AND FEATURES .................................................................................................................2 WASHER SAFETY ...........................................................................................................................3 INSTALLATION INSTRUCTIONS ....................................................................................................4 ELECTRICAL REQUIREMENTS .....................................................................................................6 OPERATING YOUR WASHER ........................................................................................................6 THE FUNCTIONS OF THE CONTROL PANEL ...............................................................................8 PROGRAMS AND FUNCTIONS ......................................................................................................9 WASHING PROCEDURE AND PROGRAM SELECTION .............................................................10 MAINTENANCE .............................................................................................................................12 HOW TO CLEAN THE FILTER ......................................................................................................13 REMOVING STAINS ......................................................................................................................14 TROUBLE SHOOTING ..................................................................................................................15 SPECIFICATION ............................................................................................................................16
2 PARTS AND FEATURES The parts and features of your washer are illustrated on the page. Become familiar with all parts and features before using your washer. Accessories NOTE The drawings in the book may vary from your washer model. They are designed to show the different features of all models coverd by this book. Your model may not include all features. Inlet hose (Cold: 1EA, Hot: 1EA)Manual Sticker holder (3EA)Guide Hose Drain (Option) ADJUSTABLE LEG CONTROL PANEL DOOR DETERGENT CASE INLET HOSE(HOT) (OPTION) INLET HOSE (COLD) COVER PUMP POWER CORD HOSE DRAIN
3 Save these instructions Your safety is important to us. To reduce the risk of fire, electrical shock, or injury when using your washer adhere to the following basic precautions. Understanding your responsibilities • Do not use chlorine bleach and ammonia or acid(such as vinegar or rust remover) in the same wash. Hazardous fumes can form. • Unplug power supply cord before attempting to service your washer. • Do not wash fiberglass material. Small particles can stick to fabrics washed in following loads and cause skin irritation. • Do not spray water on the control panel of the washer. It could cause fire or an electric shock. • In case of the dual valve model, if you connect only one water inlet valve, the water leakage from other water inlet valve(unconnected) can occurs. • This appliance must be grounded. To avoid electrical shock, use a metal pipe for the ground connection. • Flammable fluids (dry-cleaning solvents, kerosene, gasoline, etc.) should not be used or stored in or near your washer. Do not add flammable fluids to your wash water.These substances give off vapors that can create a fire hazard or explosion. • After starting a cycle, do not reach into the washer until all motions stop. • Do not tamper with the controls. • The appliance is not intended for use by young children or infirm persons without supervision. • If the supply cord is damaged, it must be replaced by the manufacturer, or its service agent or a similarly qualified person in order to avoid a hazard. • If the appliance is supplied from a cord extension set or electrical portable outlet device it should be positioned so that it is not subjected to splashing or ingress of moisture.Please ... • Have only a qualified person install, repair, or replace parts on washer. • Maintain washer properly. • Protect washer from the weather and keep it where the temperature will not fall below freezing. • Do not install the washer at a place of extremely high humidity. It could cause an electric shock or a short circuit. • Connect washer to the correct outlet, electrical supply, water supply, and drain supply. WASHER SAFETY Read all instructions before using your washer
4 Removing transit bolts 1. Before operating the washer, remove the transit bolts(3ea) along with the rubber. • If the bolts are not removed, it may cause heavy vibration, noise and malfunction. 2. Unscrew the 3 bolts with the 10mm hex wrench or spanner or cross-tip screwdriver. Keep the 3 bolts for a later time. • When the appliance is transported, transit bolts will be re-used. 3. Close the holes with sticker holders supplied. Location of washer • Check location where the washer will be installed. Make sure you have everything necessary for correct installation. • Do not place or store your washer below 0°C (32°F) to avoid any damage from freezing. • Do not place or store laundry products on top of washer at any times. • Install the washer on the horizontal solid floor. If the washer is installed on an unsuitable floor, it could make considerable noise, vibrate severely and cause a malfunction. If the washer is not level, adjust leg up or down for horizontal installation. • Ventilation openings must not be obstructed by carpeting when the washer is installed on a carpeted floor. • Leave some space (right & left : 2cm, rear : 10cm). • In case of built-in installation, the distance between top of the washer and bottom of upper plate should be at least 3mm. Inlet hose connection • The washer should be connected to the water mains using new hose set and old hose sets should not be reused. • In case of only one water inlet valve, connect the inlet hose to the cold water tap. • Periodically check the tightness of the inlet hose. • Make sure that the inlet hose is not kinked or folded and that it is not crushed. INSTALLATION INSTRUCTIONS Laundry Tub Washer approx. 2cmDrain Hose 1. Connect the inlet hose to the water tap tightly.2. Connect the inlet hose to the water inlet valve tightly.
5 Drain system • Never forget to install drain hose before operating your washer. • Open the packing box, and the drain hose is tied at backside of washer. • If you use the laundry tub, Top of laundry tub must be at least 60cm high and no higher than 100cm from bottom of washer. • When installing the drain hose to tub(sink), secure it tightly with a string. • Proper securing of the drain hose will protect the floor from damage due to water leakage. • When the drain hose is too long, do not force it back into the washer. This will cause abnormal noise. Level adjustment 1If the washer is installed on an unsuitable floor, it could make considerable noise, vibrate and cause a malfunction. 2Adjust the level of washer using adjustable legs. • Please check if there is any gap between the four adjustable legs and the floor. • Adjust the level of washer by turning adjustable legs. And make it sure that there is no swaying of washer. • After the adjustment is finished, turn the fixing nuts up tightly so that the washer maintains the adjustment. 3Make it sure that the washer does not sway when you press down the four corners of the washers top plate. adjustable legFixing Nut NOTE There should be no swaying of washer and all the adjustable legs should stick to the floor closely.
6 Recommended earthing method For your personal safety, this washer must be earthed. This washer is equipped with a power supply cord ‘A’ having a earthing plug ‘B’. To minimize possible shock hazard, the cord must be plugged into a mating earthing-type wall receptacle ‘C’. If a mating wall receptacle is not available, it is the personal responsibility and obligation of the customer to have the proper earthed wall receptacle installed by a qualified electrician.C B A ELECTRICAL REQUIREMENTS • Electrical earth is required on this washer • If it does not fit the outlet, have a proper outlet installed by a qualified electrician.• Don’t earth to a gas pipe. • Don’t change the power supply cord plug. • Check with a qualified electrician if you are not sure the washer is properly earthed. WARNINGElectrical shock hazard : Failure to follow these instructions could result in death or serious injury. OPERATING YOUR WASHER To obtain the best washing results, you must operate your washer properly. This section gives you this important information. • Close zippers, snaps, and hooks to avoid snagging other items. Remove pin, buckles, and other hard objects to avoid scratching the washer interior. • Empty pockets and pull them inside out.• Turn down cuffs and turn synthetic knits inside out to avoid pilling. • Tie strings and sashes to avoid tangling. • Treat spots and stains. (See “Removing stains” on page 21) Preparing clothes for washing
7 • Drop items into washer loosely. Items should move easily through wash water for best cleaning and wrinkle-free results. • Load washer properly and select correct load size setting. Overloading and selecting a setting too small for the wash load can : - Cause poor cleaning - Increase wrinkling - Create excessive lint - Wear out items faster (because of pilling)• Mix large and small items in each load. Load evenly to maintain washer balance. An unbalanced load can make the washer vibrate during spin. • Reduce wash time when using a small load size setting. Load with only a few small items needs less wash time. • Use a large load size setting to reduce wrinkling with permanent press clothes and some synthetic knits. These items should have more room to move in the water than heavy items. (towels, jeans) Loading 1Detergent case2Adding fabric softener • If desired, add measured liquid fabric softener to the softener inlet. • Pour liquid fabric softener into the dispenser using the amount recommended on the package. • Do not exceed the maximum fill line. Overfilling can cause early dispensing of the fabric softener which could stain clothes. • Do not open the detergent case when water is supplied. • Avoid pouring fabric softener directly on the clothes. Adding detergent • Separate heavily soiled items from lightly soiled ones, even if they would normally be washed together. • Separate dark colors from light colors, colorfast items from non-colorfast item. Sorting Soil (Heavy, Normal, Light) Separate clothes according to amount of soil. Color (White, Lignts, Darks) Separate white clothes from colored clothes. Lint (Lint producers, Collectors) Wash lint producers and lint collectors separately. Main washPre wash Fabric softener • Please use only the powder detergent for the front loader washing machine. • Please use the proper amount of detergent in conformity with the instruction of the detergent manufacturer. • A use of a large amount of detergent more than the recommended amount can cause many soapsuds and the overload to the motor. In addition to, this will deteriorate the washing and rinse performance. • If too much detergent used, it can occur that the detergent directly falls down to the inside cavity. In this case, remove the detergent case and clean the cavity after washing cycle is finished. (See page 13)
8 THE FUNCTIONS OF THE CONTROL PANEL Program selector For switching the washing machine on and off and for selecting the program. Can be rotated in both direction. Even if the program selector rotates while the program is running, the program is not changed (except for off ) . (All program is electronically controlled by PCB) Indicator light The respective indicator lights up, When the required program segment runs or “Time delay” is selected. Time delay To pre-engage time for washing. As the button is pressed, the delayed time is repeated as following; 2hours or 3hours ➝6hours ➝9hours ➝ max 12hours Button for options (in addition to the program if required) Start/Hold button For starting the washing cycle (program must have been selected) Spin button As button is pressed, spin rpm is repeated as following 800 ➝1000 ➝600 ➝800 *Warning If value of unbalance is extremely high, spin speed cant reached that r.p.m of selected by spin button. Intensive washExtended washing time. Rinse +Extra rinse cycle. Rinse HoldNo final spin cycle • Combination of additional option is possible. • The indicator lamp of the buttons lights up if options are active. • Switch off option : Press button again.
9 PROGRAMS AND FUNCTIONS Programs and functions Program Proper Temp. Cold 30°C 40°C 60°C 60°C/Pre 95°C 30°C 30°C Cold 30°C 40°C 60°C 60°C/Pre Cold 30°C 40°C 30°C Cold 30°C 40°CDegree of soiling Lightly soiled Normally to heavily soiled Heavily soiled Normally soiled Lightly soiled Normally soiled Lightly soiled Normally to heavily soiled Lightly soiled Lightly soiled Lightly soiledOption Intensive wash Rinse+ Rinse hold Intensive wash Rinse+ Rinse hold Intensive wash Rinse+ Rinse hold Intensive wash Rinse+ Rinse hold Intensive wash Rinse+ Rinse hold Intensive wash Rinse+ Rinse hold Intensive wash Rinse+ Rinse holdMax. Load Rating 1.0kg 2.5kg 2.5kg 1.0kg 1.0kgRemark First Check if laundry is washable. Short program (Fast washing time) Fabric type Colorfast garments (shirts, night dresses, pajamas…) and lightly soiled white cotton (underwear…) White cotton, linen and sheet…. Colored laundry. Colored laundry. (shirts, underwear, towels…) Made of polyamide, acrylic, polyester (synthetic or blended fabrics). Machine washable wool or wool-rich textiles or silk. ‘Hand wash” marked delicate and wool laundry Delicate, washable laundry easily damaged (silk, satin…).
10 WASHING PROCEDURE AND PROGRAM SELECTION Washing Procedure • Turn the program selector to the desired program The indicator light of Start/Hold button is on. • If required, press the button(s) for option(s). The indicator light of the selected option button is on. • If you select Rinse Hold button, led of Rinse Hold flicker continually and press Hold button immediately, seleted Spin course. When you press Start button, spin sequence begin. You can take out laundry after spin course finish. • Press the Start/Hold button. The selected program starts and the indicator light of Start/Hold button twinkle. Rinse : Rinse cycle with subsequent spin cycle for rinsing hand-washed items. Spin : Spin cycle after a program with setting “Rinse hold” is finished or for spinning hand-washed washing. Washing and rinsing water is drained before the spin cycle Drain : Water is drained after program with setting “Rinse hold” is finished. Intensive wash : The washing time is extended so that highly soiled laundry is washed more intensively. Rinse+ : Additional rinsing of laundry. Program duration and rinsing water is extended accordingly. This help to remove residuary traces of detergent and recommended in area with very soft water. Rinse Hold : For delicate textiles and net curtains. All program can be carried out without the final spin cycle. The laundry is left in the final rinsing water. Before the laundry is unloaded, the “Drain” or “Spin” must be run by using program selector.