Daewoo Dwd F1211 Instruction Manual
Have a look at the manual Daewoo Dwd F1211 Instruction Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 51 Daewoo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
11 4. FUNCTION • Recommended programs according to the laundry type • Pre Wash : If the laundry is heavily soiled, “Pre Wash” program is recommended. Pre Wash is available in Cotton and Synthetic programs. • Rinse+ : Used to introduce an additional rinse, which may assist in removing traces of detergent residue. • Eco : By selecting Eco function, the water temperature is lowered and washing time is increased. So you can economize your consumption of heating energy. Fabirc Type First check if laundry is machine washable.(white cotton, linen towel and sheets..) Colorfast garments (shirts, night dresses, pajamas..) and lightly soiled white cottons (underwear..)60˚C (95˚C)Pre Wash Rinse+ Crease CareRating 40˚C (60˚C, 30˚C)Pre Wash Rinse+ Crease CareRating Laundry type is the same as Cotton.60˚CPre Wash Rinse+ Crease CareRating Proper Temp.OptionMaximum Load Program Cotton Eco Polyamide, Acrylic, Polyester40˚C (60˚C, 30˚C)Pre Wash Rinse+ Crease CareLess than 1.5kg Synthetic Delicate laundry easily damaged (silk, curtains..)ColdRinse+ Crease CareLess than 1.0kg Delicate Machine washable woolens with pure new wool only.ColdRinse+ Crease CareLess than 1.0kg Wool “Hand wash” marked delicate and wool laundryCold (30˚C)Rinse+ Crease CareLess than 1.0kg Hand Wash Colored laundry which is lightly soiled fast.30˚C (Cold, 40˚C)Rinse+ Crease CareLess than 1.0kg Quick
12 * COTTON PROGRAM Note • If you want to change the setting during operation, press the Start/Hold button to hold the operation and press the button you want. • ‘30’, ‘40’, ‘60’ and ‘95’ ˚C washing temperatures are selectable with Cotton program. • ‘Prewash’, ‘Rinse+’, and ‘Crease Care’ wash options are selectable with Cotton program. Caution! • If you select washing temperature ‘95’ ˚C, some cold water is supplied before the drain of main wash. This is to protect the user from the hazard of burn injury by lowering the temperature of hot wash water instead of directly draining it. Therefore this is not a malfuction. (Be careful with the draining water, since it can be still hot although the temperature is lowered.) Put the laundry in to the drum. Put detergent and softener into the detergent case. Then close the door. • Put detergent into the main wash and prewash compartments in the detergent case. Softener should be below the ‘MAX’ level. • Put detergent into the pre wash compartment only if you want to add prewash. • When you want to use bleach, put it into the main wash compartment with detergent. 1 Press the Power button. • The LED shows only ‘---’ and all Program Lights turn on. 2 Select the ‘Cotton’ program using program selection dial. • If you press Start/Hold button after power button without selecting program, the ‘Cotton’ program is selected as default program. • Washing temperature ‘40’ ˚C, spin ‘800’ rpm and rinse ‘3’ times are selected automatically. • If you want to change washing temperature, the spin velocity or add wash options (Rince+, Crease Care), press each button. 3 Press Start/Hold button. • The Door is locked. By sensing the weight of laundry and supplying wash water, The appliance starts washing. 4
13 * ECO PROGRAM Note • If you want to change the setting during operation, press the Start/Hold button to hold the operation and press the button you want. • Only ‘60’ ˚C washing temperature is selectable with Eco program. • Only ‘Rinse+’ and ‘Crease Care’ of all wash options are selectable with Eco program. Put the laundry in the drum. Put detergent and softener into the detergent case. Then close the door. • Put detergent into the main wash and prewash compartments in the detergent case. Softener should be below the ‘MAX’ level. • Put detergent into the pre wash compartment only if you want to add prewash. • When you want to use bleach, put it into the main wash compartment with detergent. Press the Power button. • The LED shows only ‘---’ and all Program Lights turn on. 1 2 Select the ‘Eco’ program using program selection dial. • Washing temperature ‘60’ ˚C, spin ‘800’ rpm and rinse ‘3’ times are selected automatically. • If you want to change the spin velocity or add wash options (Rince+, Crease Care), press each button. 3 Press Start/Hold button. • The Door is locked. By sensing the weight of laundry and supplying wash water, The appliance starts washing. 4
14 * SYNTHETIC PROGRAM Note • If you want to change the setting during operation, press the Start/Hold button to hold the operation and press the button you want. • Only ‘30’, ‘40’ and ‘60’ ˚C washing temperatures are selectable with Synthetic program. • ‘Prewash’, ‘Rinse+’, and ‘Crease Care’ wash options are selectable with Synthetic program. • The appropriate amount of laundry for Synthetic program is below 1.5kg. Put the laundry in the drum. Put detergent and softener into the detergent case. Then close the door. • Put detergent into the main wash and prewash compartments in the detergent case. Softener should be below the ‘MAX’ level. • Put detergent into the pre wash compartment only if you want to add prewash. • When you want to use bleach, put it into the main wash compartment with detergent. Press the Power button. • The LED shows only ‘---’ and all Program Lights turn on. 1 2 Select the ‘Synthetic’ program using program selection dial. • Washing temperature ‘40’ ˚C, spin ‘800’ rpm and rinse ‘3’ times are selected automatically. • If you want to change washing temperature, the spin velocity or add wash options (Prewash, Rince+, Crease Care), press each button. 3 Press Start/Hold button. • The Door is locked. By sensing the weight of laundry and supplying wash water, The appliance starts washing. 4
15 * DELICATE PROGRAM Note • If you want to change the setting during operation, press the Start/Hold button to hold the operation and press the button you want. • Only ‘cold’ of washing temperature is selectable with Delicate program. • ‘1000’ rpm of spin velocity is NOT selectable with Delicate program. • Only ‘Rinse+’ and ‘Crease Care’ wash options are selectable with Delicate program. • The appropriate amount of laundry for Delicate program is below 1.0kg. Put the laundry in the drum. Put detergent and softener into the detergent case. Then close the door. • Put detergent into the main wash and prewash compartments in the detergent case. Softener should be below the ‘MAX’ level. • Put detergent into the pre wash compartment only if you want to add prewash. • When you want to use bleach, put it into the main wash compartment with detergent. Press the Power button. • The LED shows only ‘---’ and all Program Lights turn on. 1 2 Select the ‘Delicate’ program using program selection dial. • The LED shows ‘1:06’ and all Program Lights turn on. • Washing temperature ‘Cold’, spin ‘400’ rpm and rinse ‘2’ times are selected automatically. • If you want to change the spin velocity or add wash options (Rince+, Crease Care), press each button. 3 Press Start/Hold button. • The Door is locked. By sensing the weight of laundry and supplying wash water, The appliance starts washing. 4
16 * WOOL PROGRAM Note • If you want to change the setting during operation, press the Start/Hold button to hold the operation and press the button you want. • Only ‘Cold’ washing temperature is selectable with Wool program. • ‘1000’ rpm of spin velocity is NOT selectable with Hand program in order to protect damage on laundry. • Only ‘Rinse+’ and ‘Crease Care’ wash options are selectable with Wool program. • The appropriate amount of laundry for Wool program is below 1.0kg. • Use only special detergent for wool. (Since special neutral detergent for wool creates a lot of bubbles, use appropriate amount). Put the laundry in the drum. Put detergent and softener into the detergent case. Then close the door. • Put detergent into the main wash and prewash compartments in the detergent case. Softener should be below the ‘MAX’ level. • Put detergent into the pre wash compartment only if you want to add prewash. • When you want to use bleach, put it into the main wash compartment with detergent. Press the Power button. • The LED shows only ‘---’ and all Program Lights turn on. 1 2 Select the ‘Wool’ program using program selection dial. • The LED shows ‘1:06’ and all Program Lights turn on. • Washing temperature ‘Cold’, spin ‘400’ rpm and rinse ‘2’ times are selected automatically. • If you want to change the spin velocity or add wash options (Rince+, Crease Care), press each button. 3 Press Start/Hold button. • The Door is locked. By sensing the weight of laundry and supplying wash water, The appliance starts washing. 4
17 * HAND WASH Note • If you want to change the setting during operation, press the Start/Hold button to hold the operation and press the button you want. • Only ‘Cold’ and ‘30’ ˚C washing temperatures are selectable with Hand Wash program. • ‘1000’ rpm of spin velocity is NOT selectable with Hand program. • Only ‘Rinse+’ and ‘Crease Care’ wash options are selectable with Hand Wash program. • Use Hand Wash program for the laundry that is marked ‘Hand wash’ in the care label. Put the laundry in the drum. Put detergent and softener into the detergent case. Then close the door. • Put detergent into the main wash and prewash compartments in the detergent case. Softener should be below the ‘MAX’ level. • Put detergent into the pre wash compartment only if you want to add prewash. • When you want to use bleach, put it into the main wash compartment with detergent. Press the Power button. • The LED shows only ‘---’ and all Program Lights turn on. 1 2 Select the ‘Hand Wash’ program using program selection dial. • The LED shows ‘1:22’ and all Program Lights turn on. • Washing temperature ‘Cold’, spin ‘400’ rpm and rinse ‘3’ times are selected automatically. • If you want to change the washing temperature, spin velocity or add wash options (Rince+, Crease Care), press each button. 3 Press Start/Hold button. • The Door is locked. By sensing the weight of laundry and supplying wash water, The appliance starts washing. 4
18 * QUICK 30 Note • If you want to change the setting during operation, press the Start/Hold button to hold the operation and press the button you want. • Only ‘Cold’, ‘30’ ˚C and ‘40’ ˚C washing temperatures are selectable with Quick 30 program. • Only ‘Rinse+’ and ‘Crease Care’ wash options are selectable with Quick 30 program. Put the laundry in the drum. Put detergent and softener into the detergent case. Then close the door. • Put detergent into the main wash and prewash compartments in the detergent case. Softener should be below the ‘MAX’ level. • Put detergent into the pre wash compartment only if you want to add prewash. • When you want to use bleach, put it into the main wash compartment with detergent. Press the Power button. • The LED shows only ‘---’ and all Program Lights turn on. 1 2 Select the ‘Quick’ program using program selection dial. • The LED shows ‘1:16’ and all Program Lights turn on. • Washing temperature ‘30’ ˚C, spin ‘800’ rpm and rinse ‘2’ times are selected automatically. • If you want to change the washing temperature, spin velocity or add wash options (Rince+, Crease Care), press each button. 3 Press Start/Hold button. • The Door is locked. By sensing the weight of laundry and supplying wash water, The appliance starts washing. 4
19 MAINTENANCE Proper care of your washer can extend its life. This section explains how to care for your washer properly and safely. Cleaning your washer Winter storage or moving care Install and store your washer where it will not freeze. Because some water may stay in the hoses, freezing can damage your washer. If you store or move your washer during freezing weather, winterize it. Non-use or vacation care Operate your washer only when you are at home. If you are on vacation or don’t use your washer for an extended period of time, you should: • Unplug the power supply cord or turn off eletrical power to the washer. • Turn off the water supplier to the washer. This helps avoid accidental flooding (due to a water pressure surge) while you are away. Wipe up detergent, bleach, and other spills with a soft, damp cloth or sponge as they occur. Occasionally wipe the outside of the washer to keep its looking like new one.Clean interior with 250ml of chlorine bleach mixed with 500ml of detergent. Run washer through a complete cycle. Repeat this process if necessary. Exterior Interior • Turn off water faucet. • Disconnect and drain water inlet hoses. • Run washer on a drain and spin setting (see page 10) for 1 minute. • Unplug the power supply cord.• Flush water pipes and hoses. • Reconnect water inlet hoses. • Turn on water faucet. • Reconnect power supply cord. To winterize washer To use washer again Do not put sharp or metal object in your washer, or they can damage the finish. Check all pockets for pins, clips, money, bolts, nuts, etc. Do not lay these objects in your washer after emptying pockets.
20 HOW TO CLEAN THE FILTER Cleaning the water inlet filter • Clean the filter when water leaks from the water inlet. Cleaning the drain filter • This drain filter is used to screen the foreign stuffs such as threads, coins, pins, buttons etc.. • If the drain filter is not cleaned at proper time(every 10 times of use), drain problem could be caused. CAUTION: Be careful when draining if the water is hot. Cleaning the detergent case *After a while detergent and fabric softeners leave a deposit in the case; - It should be cleaned from time to time with a jet of running water. - If necessary it can be removed completely from the machine by pressing the catch downwards and by pulling it out. - To facilitate cleaning, the upper part of the fabric softener compartment can be removed. *Detergent can also accumulate inside the recess which should be cleaned occasionally with a brush. *Once you have finished cleaning, replace the case and run a rinse cycle without laundry. 1Pull the power plug out before cleaning it.2Turn off the water supply to the washer and separate the inlet hose.3Pull the inlet filter out.4Remove the dirt from the inlet filter with a brush. 1. Open the lower cover(1) by using a coin. Remove the cap hose(2) to pull out the hose.2. Unplug the cap hose(2), allowing the water to flow out. At this time use a vessel to prevent water flowing on to the floor. When water does not flow any more, turn the pump filter(3) open to the left.3. Remove any foreign material from the pump filter(3). After cleaning, turn the pump filter clockwise and insert the cap hose(2) to the original place. Close the lower cover. 1 100 232 3