D-Link Router DIR-810L User Manual

87
D-Link DIR-810L User Manua\f
Section 3 - Confi\buration
Enter a name for the inbound fi\fter ru\fe.
Se\fect A\b\bow or Deny.
Check to enab\fe ru\fe.
Enter  the  startin\b  IP  address.  Enter  0.0.0.0  if  you 
do not want to specify an IP ran\be.
Enter the endin\b IP address. Enter 255.255.255.255 
if you do not want to specify and IP r\uan\be.
C\fick the Add button to app\fy your settin\bs. You 
must  c\fick  Save.Settings  at  the  top  to  save  the 
settin\bs.
This section wi\f\f \fist any ru\fes...

88
D-Link DIR-810L User Manua\f
Section 3 - Confi\buration
SPI (Statefu\f Packet Inspection, a\fso known as dynamic packet fi\fterin\b) 
he\fps  to  prevent  cyber  attacks  by  trackin\b  more  state  per  session.  It 
va\fidates that the traffic passin\b throu\bh the session conforms to the 
protoco\f.
Enab\fe  this  feature  to  protect  your  network  from  certain  kinds  of 
“spoofin\b” attacks. 
Se\fect one of the fo\f\fowin\b for TCP and UDP ports: 
Endpoint Independent - Any incomin\b traffic...

89
D-Link DIR-810L User Manua\f
Section 3 - Confi\buration
DMZ IP Address:
PPTP:
IPSEC (\bPN):
\fTSP:SIP: Specify the IP address of the computer on the LAN that you want to 
have unrestricted Internet communication. If this computer obtains 
it’s  IP  address  automatica\f\fy  usin\b  DHCP,  be  sure  to  make  a  static 
reservation  on  the 
Setup  > Network. Settings  pa\be  so  that  the  IP 
address of the DMZ machi\une does not chan\be.
A\f\fows mu\ftip\fe machines on the LAN to connect to their...

90
D-Link DIR-810L User Manua\f
Section 3 - Confi\buration
Enter a name for your route.
Enter the IP address of packets that wi\f\f take this 
route.
Enter  the  netmask  of  the  route,  p\fease  note 
that  the  octets  must  match  your  destination  IP 
address.
Enter your next hop \bateway to be taken if this 
route is used.
The  route  metric  is  a  va\fue  from  1  to  15  that 
indicates the cost of usin\b this route. A va\fue 1 is 
the \fowest cost and 15 is the hi\u\bhest cost. 
Se\fect the...

91
D-Link DIR-810L User Manua\f
Section 3 - Confi\buration
Advanced Wireless
Set the transmit power of the antennas.
This  enab\fes  802.11d  operation.  802.11d  is  a  wire\fess 
specification  deve\foped  to  a\f\fow  imp\fementation  of 
wire\fess  networks  in  countries  that  cannot  use  the 
802.11 standard. This feature shou\fd on\fy be enab\fed 
if you are in a country that requires it.
WMM is QoS for your wire\fess network. This wi\f\f improve 
the  qua\fity  of  video  and  voice...

92
D-Link DIR-810L User Manua\f
Section 3 - Confi\buration
Wi-Fi Protected Setup (WPS)
Enab\fe the Wi-Fi Protected Setup feature. 
Note: if this option is unchecked, the WPS button on the 
side of the router will be disabled.
Tick this option to \fock the confi\bured wire\fess security 
settin\bs.
A  PIN  is  a  unique  number  that  can  be  used  to  add 
the  router  to  an  existin\b  network  or  to  create  a  new 
network. On\fy the Administrator (“admin” account) can 
chan\be or reset the PIN....

93
D-Link DIR-810L User Manua\f
Section 3 - Confi\buration
This Wizard he\fps you add wire\fess devices to the wire\fess network.
The wizard wi\f\f either disp\fay the wire\fess network settin\bs to \buide you throu\bh manua\f confi\buration, prompt you to enter the 
PIN for the device, or ask you to press the confi\buration button on the device. If the device supports Wi-Fi Protected Setup and has a 
confi\buration button, you can add it to the network by pressin\b the confi\buration button on the...

94
D-Link DIR-810L User Manua\f
Section 3 - Confi\buration
To use the Universa\f P\fu\b and P\fay (UPnP
™) feature c\fick on 
Enabled .  UPnP  provides  compatibi\fity  with  networkin\b 
equipment, software and periphera\fs.
Checkin\b  the  box  wi\f\f  a\f\fow  the  DIR-810L  to  respond 
to  pin\bs.  Uncheckin\b  the  box  may  provide  some  extra 
security from hackers.
You may set the port speed of the Internet port to 10Mbps, 
100Mbps, or Auto (recommended). 
Check  the  box  to  a\f\fow...

95
D-Link DIR-810L User Manua\f
Section 3 - Confi\buration
Guest Zone
Check to enab\fe the Guest Zone feature. 
The  schedu\fe  of  time  when  the  Guest  Zone  wi\f\f  be 
active. The schedu\fe may be set to  Always, which wi\f\f 
a\f\fow the particu\far service to a\fways be enab\fed. You 
can create your own times in the  Tools > Schedules 
section or c\fick Add New.
Enter a wire\fess network name (SSID) that is different 
from your main wire\fess network.
Check  to  a\f\fow  network  connectivity...

96
D-Link DIR-810L User Manua\f
Section 3 - Confi\buration
IPv6 Firewall
The DIR-810L’s IPv6 Firewa\f\f feature a\f\fows you to confi\bure which kind of IPv6 traffic is a\f\fowed to pass throu\bh the device. 
The DIR-810L’s IPv6 Firewa\f\f functions in a simi\far \uway to the IP Fi\fters feature.
Check the box to enab\fe the IPv6 firewa\f\f simp\fe security.
Se\fect an action from the drop-down menu.
Enter a name to identify the IPv6 firewa\f\f ru\fe.
Use the drop-down menu to se\fect the time schedu\fe...