D-Link Router DIR-685 User Manual

							86
D-Link DIR-685 User Manual
Section 3 - Configuration
Carry out the following steps to edit a FTP Access List:
Editing an FTP Access List
FTP Server
In the FTP Access Lists section, 
1. 
click the Notepad icon next to the         
FTP Access List you want to edit.  
						

							87
D-Link DIR-685 User Manual
Section 3 - Configuration
In  the  FTP  Server  Settings 
2. 
section, modify the required 
settings. 
Click  the 
3.  Save  Settings  button 
when  you  have  changed  the 
required settings.   
						

							88
D-Link DIR-685 User Manual
Section 3 - Configuration
Carry out the following steps to delete a Network Access List:
Deleting an FTP Access List
FTP Server
In  the  FTP  Access  List  section,  click  the 
1. 
Trash  Can  icon  next  to  the  FTP  Access 
List you want to delete.
The  following  dialog  box 
2. 
appears.  Click  the  OK  button 
to delete the FTP Access List.    
						

							89
D-Link DIR-685 User Manual
Section 3 - Configuration
UPnP AV Server
UPnP AV Server:
Folder:Select 
Enable  or  Disable  to  turn 
the  DIR-685  UPnP  AV  server  on 
or off.
The DIR-685 features a UPnP AV Server. This server provides the ability to stream photos, music and videos to UPnP 
AV compatible network media players. If the server is enabled, the DIR-685 will be automatically detected by UPnP 
AV compatible media players on your local network.
Specifies  the  folder  or  directory 
that  will  be  shared  by  the  UPnP 
AV  server.    Select  root  to  share 
all files on all volumes, or uncheck 
the box and click  Browse to select 
a specific folder. 
						

							90
D-Link DIR-685 User Manual
Section 3 - Configuration
iTunes Server
iTunes Server:
Folder:
Auto Refresh:
The DIR-685 features an iTunes Server. This server provides the ability to share music and videos to computers on 
the local network running iTunes. If the server is enabled, the DIR-685 will be automatically detected by the iTunes 
program and the music and videos contained in the specified directory will be available to stream over the network.
Select  Enable or  Disable to enable 
or  disable  the  DIR-685  iTunes 
server.
Specifies  the  folder  or  directory 
that  will  be  shared  by  the  UPnP 
AV  server.    Select  root  to  share 
all files on all volumes, or uncheck 
the box and click  Browse to select 
a specific folder.
Use the drop-down menu to specify 
the interval that the iTunes Server 
settings  on  the  DIR-685  should 
auto-refresh.  You  may  configure 
A u t o   R e f r e s h   t o   a u t o m a t i c a l l y 
update your shared iTunes Library 
data every 5, 15, or 30 minutes or 
at 1, 2, 6, 12 or 24 hour intervals. 
						

							91
D-Link DIR-685 User Manual
Section 3 - Configuration
BT Download Manager
Enable BT:
Share Path:
The DIR-685 features a built-in BitTorrent Manager that allows you to download and upload torrent files.
Tick  the  checkbox  to  enable  the 
DIR-685 BitTorrent Manager.
Specifies the folder that will be used 
for  Downloading  and  Uploading 
Torrents. Click the  Browse button  
to browse to the required folder on 
one  of  the  hard  drives  connected 
to the DIR-685.  
						

							92
D-Link DIR-685 User Manual
Section 3 - Configuration
Enter  a  new  password  for  the  Administrator  account.  The 
administrator can make changes to router settings.
Tick  the  checkbox  to  display  the  graphical  authentication 
window  on  the  login  screen.  Enabling  this  option  adds 
an  extra  level  of  security  as  it  requires  users  to  type  the 
password  that  appears  in  the  graphical  authentication 
window on the login screen, in addition to their user name 
and password.
Remote Management allows the DIR-685 to be configured 
from  the  Internet  using  a  web  browser.  A  username  and 
password is still required to access the Web-Management 
interface.  By  default  only  a  member  of  your  network  can 
browse the built-in web pages to perform Administrator tasks. 
This feature enables you to perform Administrator tasks from the remote \
(Internet) host.
If  Remote  Management  is  enabled,  you  can  type  an  IP  address  in  this  field  to  restrict  remote  access  to  the  specified  IP 
address. Leave this field blank if you want to allow remote access from any computer on the Internet. 
The port number used to access the DIR-685 from the Internet.
Example: http://x.x.x.x:8080 where x.x.x.x is the Internet IP address of the DIR-685 and 8080 is the port used for the Web 
Management interface.
Administrator 
Password:
Enable Graphical  Authentication:
Enable Remote  Management:
IP Permitted to  Access: 
Port:
Admin
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management.  
There are two accounts that can access the management interface through the web browser. The accounts are admin 
and user. Admin has read/write access while user has read-only access. User can view settings but cannot make any 
changes. Only the admin account has the ability to change both admin and\
 user account passwords. 
						

							93
D-Link DIR-685 User Manual
Section 3 - Configuration
Time
Select  the  Time  Zone  from  the  drop-down 
menu.
To select Daylight Saving time manually, select 
enabled or disabled, and enter a start date and 
an end date for daylight saving time.
Click this button to synchronize the DIR-685’s 
clock with the time set on your computer.
NTP  is  short  for  Network  Time  Protocol.  NTP 
synchronizes computer clock times in a network 
of  computers.  Tick  this  box  to  use  one  of  the 
D-Link NTP server’s.
Use  the  drop-down  menu  to  select  one  of  the 
D-Link Internet time servers.
To  manually  input  the  time,  enter  the  values 
in these fields for the Year, Month, Day, Hour, 
Minute, and Second
Time Zone:
Enable Daylight  Saving:
Sync. your 
computer’s time  settings:
Automatically 
synchronize with  D-Link’s Internet  time server:
NTP Server Used: Set the Time and  Date Manually:
The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system 
clock. From this section you can set the time zone that you are in and set the Time Server. Daylight Saving can also 
be configured to automatically adjust the time when needed. 
						

							94
D-Link DIR-685 User Manual
Section 3 - Configuration
Log Settings
The Broadband Router keeps a running log of events and activities occurring on the Router. You may send these logs 
to a SysLog server on your network.
Save Log File:
Log Types: Click the 
Save button to save the log results to 
your hard drive.
Select the type of information displayed in the 
router log. 
						

							95
D-Link DIR-685 User Manual
Section 3 - Configuration
Email Settings
The E-mail feature can be used to send the system log files, router alert messages, and firmware update notification 
to your e-mail address. 
Enable Email 
Notification: 
From Email  Address:
To Email Address: Email Subject:SMTP Server  Address:
SMTP Server  Port:
Enable 
Authentication:
Account Name: Password:
Send Mail Now: When this option is enabled, router activity logs 
are e-mailed to a designated e-mail address.
This  e-mail  address  will  appear  as  the  sender 
when you receive a log file or firmware upgrade 
notification via e-mail.
Enter  the  e-mail  address  where  you  want  the 
e-mail sent. 
Enter a Subject for the e-mail messages that will 
be sent from the DIR-685. 
Enter  the  SMTP  server  address  for  sending 
e-mail. 
Enter  the  Port  Number  used  by  your  SMTP 
Server.
Tick  this  box  if  your  SMTP  server  requires 
authentication. 
If ticking the Enable Authentication
 checkbox, enter the account used to authenticate with the SMTP server.
Enter the password associated with the account used to authenticate with the SMTP Server. Re-type the password associated 
with the account in the Verify Password field.
Click this button to send a test e-mail from the DIR-685 to the e-mail address specified in the  To Email Address field.