D-Link Router DIR-615 User Manual

1D-Link DIR-615 User Manual
Section 3 - Configuration
Dynamic IP Address (DHCP)
Select Dynamic IP (DHCP) to obtain IP Address 
information automatically from your ISP. Select 
this option if your ISP does not give you any IP 
numbers to use. This option is commonly used 
for Cable modem services.
The Host Name is optional but may be required 
by some ISPs. 
Check  the  box  if  you  are  having  problems 
obtaining an IP address from your ISP.
Enter  the  Primary  DNS  server  IP  address 
assigned...

D-Link DIR-615 User Manual
Section 3 - Configuration
Select PPPoE  (Username/Password)  from 
the drop-down menu.
Select Static if your ISP assigned you the IP 
address,  subnet  mask,  gateway,  and  DNS 
server  addresses.  In  most  cases,  select 
Dynamic.
Enter the IP address (Static PPPoE only).
Enter your PPPoE user name.
Enter your PPPoE password and then retype 
the password in the next box.
Enter the ISP Service Name (optional).
Select  either Always-on, On-Demand,  or 
Manual.
Enter...

3D-Link DIR-615 User Manual
Section 3 - Configuration
Select Static  if  your  ISP  assigned  you  the  IP 
address, subnet mask, gateway, and DNS server 
addresses. In most cases, select Dynamic.
Enter the IP address (Static PPTP only).
Enter  the  Primary  and  Secondary  DNS  Server 
Addresses (Static PPTP only).
Enter the Gateway IP Address provided by your 
ISP.
Enter  the  Server  IP  provided  by  your  ISP  (op-
tional).
Enter your PPTP username.
Enter your PPTP password and then retype the...

4D-Link DIR-615 User Manual
Section 3 - Configuration
The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not 
recommended that you change the default MAC address unless required by your ISP.  You can use the Clone Your PC’s 
MAC Address button to replace the Internet port’s MAC address with the MAC addre\
ss of your Ethernet card.
MAC Address: 

5D-Link DIR-615 User Manual
Section 3 - Configuration
Select Static if your ISP assigned you the IP 
address,  subnet  mask,  gateway,  and  DNS 
server  addresses.  In  most  cases,  select 
Dynamic.
Enter the LTP IP address supplied by your 
ISP (Static only).
Enter the Subnet Mask supplied by your ISP 
(Static only).
Enter  the  Gateway  IP  Address  provided  by 
your ISP.
Enter  the  Server  IP  provided  by  your  ISP 
(optional).
Enter your LTP username.
Enter  your  LTP...

6D-Link DIR-615 User Manual
Section 3 - Configuration
MTU:
Clone MAC 
Address:
Maximum  Transmission  Unit - you may need  to change  the MTU for optimal  performance  with your specific ISP. 1464  is 
the default MTU.
The  default  MAC  Address  is  set  to  the  Internet  port’s  physical  interface  MAC  address  on  the  Broadband  Router.  It  is  not 
recommended that you change the default MAC address unless required by your ISP.  You can use the Clone Your PC’s 
MAC Address button to...

7D-Link DIR-615 User Manual
Section 3 - Configuration
Enter the IP address assigned by your ISP.
Enter the Subnet Mask assigned by your ISP.
Enter the Gateway assigned by your ISP.
The DNS server information will be supplied by 
your ISP (Internet Service Provider.)
Maximum Transmission Unit - you may need to 
change the MTU for optimal performance with 
your specific ISP. 1500 is the default MTU.
The default MAC Address is set to the Internet 
port’s  physical  interface  MAC  address  on  the...

8D-Link DIR-615 User Manual
Section 3 - Configuration
Big Pond
Enter the IP address of the login server.
Enter your BigPond username.
Enter your BigPond password and then retype 
the password in the next box.
The DNS server information will be supplied by 
your ISP (Internet Service Provider.)
Maximum Transmission Unit - you may need to 
change the MTU for optimal performance with 
your specific ISP. 1500 is the default MTU.
The default MAC Address is set to the Internet’s 
p h y s i c a l   i n t...

9D-Link DIR-615 User Manual
Section 3 - Configuration
Wireless Settings
If you want to configure your wireless settings through the setup wizard, click Wireless Network Setup Wizard and 
skip to page 73. If you would like to enter your settings manually continue to the next page. The Add Wireless Device 
Wizard  is used to allow a wireless client to connect using WiFi Protected Set\
up. 

30D-Link DIR-615 User Manual
Section 3 - Configuration
Check the box to enable the wireless function. 
If you do not want to use wireless, uncheck the 
box to disable all the wireless functions.
Service Set Identifier (SSID) is the name of your 
wireless network. Create a name using up to 3 
characters. The SSID is case-sensitive.
The Auto Channel Scan setting can be selected 
to allow the DIR-615 to choose the channel with 
the least amount of interference.
Indicates  the  channel  setting  for...