D-Link Router DIR-506L User Manual

67
D-Link DIR-506L User Manual67
D-Link DIR-506L User Manual
Section 5 - Status
Statistics
The DIR-506L keeps statistics of the traffic that passes through it. You can view the amount of packets that pass through the 
LAN and wireless portions of the network. Click the  Refresh Statistics button to update the information, or click the  Clear 
Statistics button to reset all statistics. The traffic counter will reset if the DIR-506L is rebooted.   

68
D-Link DIR-506L User Manual68
D-Link DIR-506L User Manual
Section 5 - Status
Wireless Client List 
The wireless client table displays a list of current connected wireless clients. This table also displays the connection time and 
MAC address of the connected wireless clients.   

69
D-Link DIR-506L User Manual69
D-Link DIR-506L User Manual
Section 6 - Support
This screen gives you more information about the various parts of the configuration interface. Click on a link to learn more 
about that topic.
Help   

70
D-Link DIR-506L User Manual
Section 7 - Connecting a Wireless Client
Connecting a Wireless Client
WPS Button
Step	2 -  Within  2  minutes,  press  the  WPS  button  on  your  wireless  client  (or  launch  the  software  utility  and  start  the  WPS 
process).
The easiest and most secure way to connect your wireless devices to the router is WPS (Wi-Fi Protected Setup). Most wireless 
devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS...

71
D-Link DIR-506L User Manual
Section 7 - Connecting a Wireless Client
Windows® 7
It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your 
wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.
1.  Click on the wireless icon in your system tray (lower-right corner).
2. The utility will display any available wireless networks in your area.
Wireless Icon
WPA/WPA2  

72
D-Link DIR-506L User Manual
Section 7 - Connecting a Wireless Client
3.  Highlight the wireless network (SSID) you would like to connect to 
and click the Connect button.
  If you get a good signal but cannot access the Internet, check your 
TCP/IP settings for your wireless adapter. Refer to the Networking 
Basics section in this manual for more information.
4. The  following  window  appears  while  your  computer  tries  to 
connect to the router.  

73
D-Link DIR-506L User Manual
Section 7 - Connecting a Wireless Client
5.  Enter the same security key or passphrase that is on your router and 
click  Connect. You can also connect by pushing the WPS button on 
the router.
It may take 20-30 seconds to connect to the wireless network. If the 
connection fails, please verify that the security settings are correct. The 
key or passphrase must be exactly the same as on the wireless router.  

74
D-Link DIR-506L User Manual
Section 7 - Connecting a Wireless Client
WPS
The WPS  feature  of  the  DIR-506L  can  be  configured  using Windows®  7.  Carry  out  the  following  steps  to  use Windows®  7  to 
configure the WPS feature:
1.  Click the Start button and select Computer from the Start menu.
2.  Click Network on the left side.  

75
D-Link DIR-506L User Manual
Section 7 - Connecting a Wireless Client
3.  Double-click the DIR-506L.
4.  Input the WPS PIN number (displayed in the WPS window on the 
Router’s  LCD  screen  or  in  the  Setup > Wireless  Setup  menu  in 
the Router’s Web UI) and click Next.  

76
D-Link DIR-506L User Manual
Section 7 - Connecting a Wireless Client
5.  Type a name to identify the network.
6.  To configure advanced settings, click the         icon.
Click Next to continue.