D-Link Router DIR-301 User Manual

1D-Link DIR-301 User Manual
Section 3 - Configuration
Select Dynamic  (most  common)  or Static.  Select 
Static if your ISP assigned you the IP address, subnet 
mask, gateway, and DNS server addresses.
Enter the IP address (Static PPTP only).
E n t e r   t h e   P r i m a r y   a n d   S e c o n d a r y   D N S   S e r ve r 
Addresses (Static PPTP only).
Enter the Gateway IP Address provided by your ISP.
The  DNS  server  information  will  be  supplied  by  your 
ISP (Internet Service Provider.)...

D-Link DIR-301 User Manual
Section 3 - Configuration
Select Dynamic (most common) or Static. Select Static 
if  your  ISP  assigned  you  the  IP  address,  subnet  mask, 
gateway, and DNS server addresses.
Enter the IP address (Static L2TP only).
Enter the Primary and Secondary DNS Server Addresses 
(Static L2TP only).
Enter the Gateway IP Address provided by your ISP.
The DNS server information will be supplied by your ISP 
(Internet Service Provider.)
Enter the Server IP provided by your...

3D-Link DIR-301 User Manual
Section 3 - Configuration
Enter your BigPond user name.
Enter your BigPond password and then retype 
the password in the next box.
Enter the IP address of the login server.
Enter the IP address of the login server.
The  default  MAC  Address  is  set  to  the WAN’s 
p hy s i c a l   i n t e r fa c e   M AC   a d d r e s s   o n   t h e 
Broadband Router. It is not recommended that 
you  change  the  default  MAC  address  unless 
required by your ISP.
The  default  MAC...

D-Link DIR-301 User Manual
Section 3 - Configuration
Enter the IP address assigned by your ISP.
Enter the Subnet Mask assigned by your ISP.
Enter the Gateway assigned by your ISP.
The  default  MAC  Address  is  set  to  the  WAN’s 
physical interface MAC address on the Broadband 
Router.  It  is  not  recommended  that  you  change 
the default MAC address unless required by your 
ISP.
The  default  MAC  address  is  set  to  the  WAN’s 
physical interface MAC address on the Broadband...

D-Link DIR-301 User Manual
Section 3 - Configuration
Check the box to enable the wireless function. If 
you do not want to use wireless, uncheck the box 
to disable all the wireless functions.
Service Set Identifier (SSID) is the name of your 
wireless network. Create a name using up to 32 
characters. The SSID is case-sensitive.
Indicates the channel setting for the WBR-2310. By 
default the channel is set to 6. The Channel can be 
changed to fit the channel setting for an existing 
wireless...

D-Link DIR-301 User Manual
Section 3 - Configuration
This section will allow you to change the local network settings of the router and to configure the DHCP settings.
Network Settings
Enter the IP address of the router. The default 
IP address is 192.168.0.1.
If  you  change  the  IP  address,  once  you  click 
Apply,  you  will  need  to  enter  the  new  IP 
address  in  your  browser  to  get  back  into  the 
configuration utility.
Enter  the  Subnet  Mask.  The  default  subnet 
mask is...

D-Link DIR-301 User Manual
Section 3 - Configuration
Check  the  box  to  enable  the  DHCP  server  on 
your router. Uncheck to disable this function.
Enter the starting and ending IP addresses for 
the DHCP server’s IP assignment.
The  length  of  time  for  the  IP  address  lease. 
Enter the Lease time in minutes.
Next to Enabled, check the box to add a DHCP 
reservation.
Enter a computer name or select one from the 
drop-down menu. Click the 

D-Link DIR-301 User Manual
Section 3 - Configuration
Virtual Server Rules
The Virtual  Server  option  allows  you  to  define  a  single  public  port  on  your  router  for  redirection  to  an  internal  LAN 
IP  Address  and  Private  LAN  port  if  required. This  feature  is  useful  for  hosting  online  services  such  as  FTP  or Web 
Servers. 
Selct an application from the Application Name 
drop-down menu. Click the 

D-Link DIR-301 User Manual
Section 3 - Configuration
Port Forwarding Rules
This section allows you to open a single port or a range of ports.
Check the box to enable the rule. 
Enter a name for the rule.
Enter  the  IP  address  of  the  computer  on  your 
local network that you want to allow the incoming 
service to.
Enter  the  port  or  ports  that  you  want  to  open. 
If you want to open 1 port, enter the same port 
in both boxes.
Select TCP, UDP, or Any.
Select a schedule from the...

30D-Link DIR-301 User Manual
Section 3 - Configuration
Application Rules
Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and 
others. These applications have difficulties working through NAT (Network Address Translation). Special Applications 
makes some of these applications work with the DIR-301.
Check the box to enable the rule. 
Enter a name for the rule.
This is the port used to trigger the application. It 
can be either a single port...