Creative Pfaff 4 Manual

Introduction
1:21
Alphabets
ComicCyrillic
Outline
Script
Grand 

Introduction1:22 

Preparations
2 

2:2
CABPreparations
8QSDFNLQJ
 RIWKHER[DQGUHPRYHWKHRXWHUSDFNDJLQJ
and lift off the machine carrying case.
2.  Remove all other packing material and the plastic bag.
3.  Slide off the accessory tray and remove the styrofoam inside.
Note: Styrofoam left in the accessory tray while sewing may affect stitch quality. The styrofoam is for packing 
purposes only and should be removed.
Note: Your creative
™ 4.5 sewing and embroidery machine is adjusted to provide the best stitch result at normal room...

2:3
C
Preparations
3DFNDZD\DIWHUVHZLQJ
1.  Turn the main switch (C) off.
2.  Unplug the cord from the wall socket and then 
from the machine (B).
3.  Unplug the foot control cord from the machine 
(A). Wind the foot control cord and place inside 
the open area on the underside of the foot 
control. 
4.  Place all accessories in the accessory tray. Slide 
the tray on to the machine around the free arm. 
5.  Place the foot control in the space above the free 
arm.
6.  Put on the hard cover. 
/(OLJKWV...

2:4Preparations
Small spool cap
Main spool pin in vertical position Large spool cap
Spool pins
Your machine has two spool pins, a main spool 
pin and an auxiliary spool pin. The spool pins 
are designed for all types of thread. The main 
spool pin is adjustable and can be used both in a 
horizontal position (the thread reels off the spool) 
and a vertical position (the thread spool rotates). 
Use the horizontal position for normal threads and 
the vertical position for large spools or specialty...

2:5
D
E
F
G
CB
A
C
B
A
Preparations
7KUHDGLQJWKHPDFKLQH
Make sure that the presser foot is raised and the 
needle is in the up position. 
 3ODFHWKHWKUHDGRQWKHVSRROSLQDQG

2:6
D
E
CB
F
A
CB
A
Preparations
7KUHDGLQJIRUWZLQQHHGOH
Replace the sewing needle with a twin needle. Make 
sure that the presser foot is raised and the needle is 
in the up position. 
 3ODFHWKHWKUHDGRQWKHVSRROSLQDQG

2:7
C
D
B
A
E
C
A
Preparations
%REELQZLQGLQJ
:LQGLQJIURPKRUL]RQWDOSRVLWLRQ
1.  Place an empty bobbin on the bobbin spindle, 
with the logo facing up. Use only the original 
PFAFF
® bobbins approved for this model. 
2.  Place the thread spool on the spool pin in 
horizontal position. Slide a spool cap tightly 
against the spool.
3.  Place the thread into the thread guide (A) from 
front to back. Pull the thread counter-clockwise 
above the bobbin winder thread guide (B) and 
then through the bobbin...

2:8
C
A
B
B
CA
1
3
2
4
Preparations
:LQGLQJZKLOHHPEURLGHULQJRUVHZLQJ
Swing the auxiliary spool pin up. Place an 
appropriate spool cap, felt pad and thread spool on 
the spool pin. 
The needle thread (blue) is placed into the thread 
guide (A) and underneath the bobbin winder thread 
guide (B). Pull the bobbin thread (red) counter-
clockwise above the bobbin winder thread guide 
(B) and through the bobbin thread guides (C). Then 
follow step 4 and 5 on the previous page.
,QVHUWLQJWKHEREELQ
1....