Creative Pfaff 4 Manual

7:3
G
H
J
K
L
M
I
(PEURLGHU\KRRSoverview
G  Embroidery hoop connector
H Outer hoop
I Inner hoop
J Quick release
K Retaining screw
/ 5LEVIRU

7:4
A
Embroidery mode - preparations
5HPRYHWKHHPEURLGHU\XQLW
1.  To store the embroidery unit in the embroidery 
case, move the embroidery arm to park position 
by selecting park position on the screen in either 
Embroidery edit or Embroidery stitch-out. 
2.  Press the button at the left, underneath the 
embroidery unit (A) and slide the unit to the left 
to remove it. 
3.  The cover of the socket closes automatically.
4.  Store the embroidery unit in the original 
packing material, place in the soft...

7:5
A
B
Embroidery mode - preparations
Slide on the hoop
Make sure that the accessory tray (only on the large 
embroidery unit, type BE20) on the embroidery unit 
is closed. Slide the hoop onto the embroidery unit 
from front to back until it clicks into place.
The marked center point on the design should 
match the starting point of the needle. If minor 
adjustments are needed use the icons on the screen 
(See chapter 8).
To remove the hoop from the embroidery arm, 
press the grey button on the hoop...

7:6
B
A
Embroidery mode - preparations
*HWWLQJVWDUWHGHPEURLGHULQJ
1.  After attaching the embroidery unit and 
embroidery foot, insert a bobbin with 
lightweight bobbin thread.
Note: Make sure that the IDT™ system is disengaged.
2.  To select a design, open selection menu and 
touch the design menu icon (A). Locate desired 
design and touch it once to load to Embroidery 
edit.
3.  The machine automatically switches to 
Embroidery edit. The design is placed in the 
center of the hoop. 
4.  Hoop a piece...

7:7
C
D
Embroidery mode - preparations
 7KUHDGWKHPDFKLQHZLWKWKH

7:8Embroidery mode - preparations
 :KHQWKH

Embroidery mode 
– edit
8 

8:2Embroidery mode - edit
3
1
4
5
6
7
2
9
10122011
13141718
2930
19
1516
21
22
23
24
25
26
27
28
8
(PEURLGHU\HGLWoverview
 (PEURLGHU\

8:3
Embroidery mode - edit
E
A
F
DC
B
Load a GHVLJQ
To load a design, open the selection menu (29). 
Select designs (A) from the selection bar, then 
choose one of the following four tabs:
3HUVRQDOGHVLJQV%
Designs that you have created, adjusted and/or 
combined and saved.
Built-in PDFKLQHGHVLJQV&
Designs that are stored in the permanent sewing 
machine memory.
Built-in PLQLGHVLJQV
Mini designs that are stored in the permanent 
sewing machine memory.
Built-in TXLOWGHVLJQV(
Designs created...

8:4Embroidery mode - edit
A
CBA
2
Load a stitch
To load a stitch, select stitches (A) from the selection 
bar. Select a category and then a subcategory. 
Touch your desired stitch on the screen to load to 
Embroidery edit.
It is possible to load previously stored patchwork, 
single stitch and tapering programs into 
Embroidery edit to stitch-out in the hoop. 
If the stitch contains tapering, the stitch combination 
will be converted to an embroidery design.
=RRP2SWLRQV
Use the + and - icons to zoom...