Creative Nomad 3 Manual

Introduction     xi
3

!!

	



❑
Do not drop the Jukebox on a solid surface or drop a heavy object on the Jukebox.
			
	

❑
If the Jukebox comes into contact with water, dry it immediately with a dry cloth.
❑
If the Jukebox becomes wet, remove the batteries.  Allow the Jukebox and components to dry completely 
before re-assembling.
❑
If the Jukebox is not functioning, call Technical Support.
...

Introduction     xii
DO:
❑
Insert the batteries according to the polarity markings on the product; see the diagram on the bottom of the 
battery compartment for proper positioning.
❑
Keep the batteries in a cool and dry place, away from heat, moisture, and metal objects when not in use.
❑
Handle leaking batteries with rubber gloves.  Avoid direct contact with skin or eyes.  If this happens, wash 
the skin and flush the eyes thoroughly with clean water—seek medical attention.
❑
Dispose of used batteries...

Your NOMAD Jukebox     1
1
$

	

Your NOMAD Jukebox includes the following
For a list of the latest accessories, visit NOMAD World at http://www.nomadworld.com
.
Power adapter and cable
Software installation CD
Protective carrying pouchBackphones
USB cable8 rechargeable AA 
NiMH batteries
NOMAD Jukebox
Quick Start guide
The connector may be slightly 
different from that shown, 
depending on the country in 
which you purchased 
NOMAD Jukebox. 

Your NOMAD Jukebox     2
7


!
/  
/  /   /  
Screen Title
Main Info
Soft button 
functionsScroll Up/Down buttons
Screen navigation—press 
to move up or down 
through the items, press 
and hold to move rapidly 
through the list.  Also, use 
to increment character in 
search/save operation.
Skip Forward button
Restart audio at the beginning of the 
next track in the Play List.
Hold down the button to enable the 
Seek function and search forward to 
any point in the memory.
Stop button...

Your NOMAD Jukebox     3
Lock switch
While in the ON position, 
the control buttons and 
Volume Adjuster cannot be 
operated.
Volume Control
Adjusts audio volume through the 
headphones.
Note: To control the playback volume of 
speakers connected to NOMAD Jukebox 
using Line Out Jacks 1 and 2, adjust the 
volume control of the speakers instead.Headphones 
Jack
Power Jack
Connects to the power adapter.
NOMAD Jukebox recharges the 
NiMH batteries if the batteries 
are installed and the adapter is...

Your NOMAD Jukebox     4
Battery case
Reset
If NOMAD Jukebox stops responding, 
insert and push a straightened 
paperclip into this hole.
0
00 0 

Setting Up NOMAD Jukebox     5
2


 

	

Your NOMAD Jukebox comes with more than 20 hours of music preloaded— you can enjoy playing the songs 
immediately on your NOMAD Jukebox whether or not it is connected to a PC.  Just follow these steps to listen to 
the songs immediately:

 
#8
!


0

!
Insert the rechargeable NiMH batteries according to the diagram inside the battery case.

	

Plastic platform for 
metal contact clip
IMPORTANT
Make sure that the four...

Setting Up NOMAD Jukebox     6

 
%8






	




$   
.  
  


The diagram below shows how to make the connection for:
A. Downloading MP3 music to NOMAD Jukebox using PlayCenter 2 or Sound Jam.
B. 1. Supplying power to your NOMAD Jukebox by using the power adapter.
2. Recharging the NiMH batteries in NOMAD Jukebox.

 
8


	



/      
To run the Jukebox tutorial:
1. Insert the NOMAD Jukebox Installation CD into your 
CD-ROM drive.
2. For Windows, when the...

Setting Up NOMAD Jukebox     7

 
)8
!

*

Install all the programs in the installation CD before accessing the software.
+*!
To install the software for Windows:
1. At the Creative PlayCenter 2 setup screen, the applications to be installed are selected by default.  Click the 
right arrow button to start the installation.  The Creative Product Registration 
dialog appears.
2. Click the Next button to begin the registration process.  Follow the instructions to complete the...

Setting Up NOMAD Jukebox     8

 
&8
9




	


4


!
To check that the NOMAD Jukebox driver was successfully installed:
1. Click the Start button on the Windows Taskbar and select 
Settings, and click on Control Panel.
2. On the Control Panel 
window, double-click the System 
icon.
3. In the System Properties 
dialog, click the Device Manager 
tab.
4. On the Device Manager 
tab page, double-click “Universal 
Serial Bus controllers,” and then check that Creative 
NOMAD...