compaq notebook 100 series User Manual
Here you can view all the pages of manual compaq notebook 100 series User Manual. The Compaq manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 71
Removal and Replacement Procedures5-23 COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Writer: David Calvert Saved by: JAbercrombie Saved date: 04/05/00 1:32 PM Part Number: 177845-001 File name: CH05.doc 5.14 EMI Shield EMI Shield Spare Part Number Information EMI shield 176002-001 1. Prepare the computer for disassembly (Section 5.3). 2. Remove the top cover (Section 5.10). 3. Remove the keyboard (Section 5.13). 4. Remove the 12 screws securing the EMI shield to the base assembly (Figure...
Page 72
5-24Removal and Replacement Procedures COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Writer: David Calvert Saved by: JAbercrombie Saved date: 04/05/00 1:32 PM Part Number: 177845-001 File name: CH05.doc 5. Lift up the front edge of the shield and swing it toward the back of computer (Figure 5-21). Figure 5-21. Removing the EMI shield 6. Remove the EMI shield. Reverse the removal procedure described above to replace the EMI shield.
Page 73
Removal and Replacement Procedures5-25 COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Writer: David Calvert Saved by: JAbercrombie Saved date: 04/05/00 1:32 PM Part Number: 177845-001 File name: CH05.doc 5.15 TouchPad TouchPad Spare Part Number Information TouchPad176044-001 1. Prepare the computer for disassembly (Section 5.3) and, in the order below, remove the following components: top cover (Section 5.10) hard drive (Section 5.11) RTC battery (Section 5.12) keyboard (Section 5.13) ...
Page 74
5-26Removal and Replacement Procedures COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Writer: David Calvert Saved by: JAbercrombie Saved date: 04/05/00 1:32 PM Part Number: 177845-001 File name: CH05.doc 5.16 Speakers Speakers Spare Part Number Information Speakers (2; spared in Hardware Kit) 176049-001 1. Prepare the computer for disassembly (Section 5.3) and, in the order below, remove the following components: top cover (Section 5.10) keyboard (Section 5.13) EMI shield (Section 5.14) 2....
Page 75
Removal and Replacement Procedures5-27 COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Writer: David Calvert Saved by: JAbercrombie Saved date: 04/05/00 1:32 PM Part Number: 177845-001 File name: CH05.doc 5.17 Display Assembly Display Assembly Components Spare Part Number Information 12.1-inch panel, HPA 176037-001 12.1-inch panel, TFT 176038-001 Left and right hinge covers (spared in Plastics Kit)176048-001 1. Prepare the computer for disassembly (Section 5.3) and, in the order below, remove the...
Page 76
5-28Removal and Replacement Procedures COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Writer: David Calvert Saved by: JAbercrombie Saved date: 04/05/00 1:32 PM Part Number: 177845-001 File name: CH05.doc 3. Open the computer as far as it will open. 4. Disconnect the display video cable , display inverter cable , and microphone cable (Figure 5-25). Figure 5-25. Disconnecting the Display Cables
Page 77
Removal and Replacement Procedures5-29 COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Writer: David Calvert Saved by: JAbercrombie Saved date: 04/05/00 1:32 PM Part Number: 177845-001 File name: CH05.doc 5. Remove the four screws securing the display hinges to the base assembly (Figure 5-26). 6. Remove the display assembly . NOTE: Make sure the display assembly is supported and does not fall when the screws are removed. Figure 5-26. Removing the Display Assembly
Page 78
5-30Removal and Replacement Procedures COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Writer: David Calvert Saved by: JAbercrombie Saved date: 04/05/00 1:32 PM Part Number: 177845-001 File name: CH05.doc When installing the display assembly, make sure the display video cable is routed behind the left speaker connector on the system board (Figure 5-27). Figure 5-27. Routing the Display Video Cable
Page 79
Removal and Replacement Procedures5-31 COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Writer: David Calvert Saved by: JAbercrombie Saved date: 04/05/00 1:32 PM Part Number: 177845-001 File name: CH05.doc When replacing the display assembly, it is imperative that the DIP switches are correctly set. To set the display DIP switches on the system board, follow the steps below. 1. Remove the display assembly. 2. Locate the part number label on the display microphone cable (Figure 5-28). 3. Part...
Page 80
5-32Removal and Replacement Procedures COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Writer: David Calvert Saved by: JAbercrombie Saved date: 04/05/00 1:32 PM Part Number: 177845-001 File name: CH05.doc 5.18 Speaker Housing Speaker Housing Spare Part Number Information Speaker housing (spared in Plastics Kit) 176048-001 I/O cover (spared in Plastics Kit) 176048-001 1. Prepare the computer for disassembly (Section 5.3) and, in the order below, remove the following components: top cover...