Compaq MP1400 Microportable Projector Users Guide
Here you can view all the pages of manual Compaq MP1400 Microportable Projector Users Guide. The Compaq manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 11
MP1600 Microportable Projector 1-5 Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 11/08/99 5:08 PM Part Number:383706-001 File name: BkCh1.doc Connecting the Projector to a Desktop Computer 1. Connect one end of the projector signal cable 1 B to the projector and the other end to the VGA connector on the desktop computer and tighten the screws. .If your computer has a digital connector, connect one end of the digital flat panel (DFP) signal cable 1A to the digital connector on...
Page 12
1-6 MP1600 Microportable Projector Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 11/12/99 10:18 AM Part Number:383706-001 File name: BkCh1.doc Connecting the Projector to a Compaq PC Companion To connect the projector to a Compaq PC Companion, the PC Companion must have a male connector adapter and a VGA-out PC Card with a 15-pin connector. .The VGA-out PC Card with the 15-pin connector is not included with the Compaq PC Companion. It is sold separately. For information on...
Page 13
MP1600 Microportable Projector 1-7 Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 11/08/99 5:08 PM Part Number:383706-001 File name: BkCh1.doc Connecting the Projector to Other Video Sources To connect the projector to a camcorder, DVD player, or VCR, the Compaq Video Adapter must be connected to the projector. The Compaq Video Adapter has been specifically designed to fit the Compaq MP1600 Microportable Projector. This adapter converts the signals from the camcorder for...
Page 14
1-8 MP1600 Microportable Projector Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 11/12/99 10:18 AM Part Number:383706-001 File name: BkCh1.doc .When the adapter is activated, one of the LEDs 4 on the video adapter will turn green. Connecting a Camcorder, VCR, or DVD Player to the Compaq Video Adapter 1. Use an RCA cable to connect a VCR to the video connector 1 on the video adapter. Use an S-video cable to connect a camcorder or DVD player to the S-video connector 2 on...
Page 15
MP1600 Microportable Projector 1-9 Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 11/08/99 5:08 PM Part Number:383706-001 File name: BkCh1.doc .Be sure to place the rubber boot cover over the DFP (digital) connector on the projector when it is not in use to prevent electrostatic discharges from damaging the connector. Powering On the Projector Follow these instructions to power on the projector: 1. Ensure that the power cord and signal cable are securely connected. .Make sure...
Page 16
1-10 MP1600 Microportable Projector Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 11/08/99 5:08 PM Part Number:383706-001 File name: BkCh1.doc 4. Power on your source (computer, PC Companion, or VCR, etc.) and launch the software application being used to display images on the projection screen. If applicable, press the Function key on the computer designated for external display. .If there is a long delay between the time the startup screen displays and the time the...
Page 17
MP1600 Microportable Projector 1-11 Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 11/08/99 5:08 PM Part Number:383706-001 File name: BkCh1.doc Adjusting the Projected Image There are two ways to adjust the projected image: Adjusting the projector height Adjusting the projector focus Adjusting the Projector Height This projector has a built-in elevator foot that can raise the projector approximately 1-inch. To adjust the height: 1. Turn the foot sideways to balance the...
Page 18
1-12 MP1600 Microportable Projector Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 11/08/99 5:08 PM Part Number:383706-001 File name: BkCh1.doc 2. Raise the projector to the desired display angle, then press the elevator button 1 on the front of the projector to release the foot 2. 3. To lower the display angle, press the button on the front of the projector again and press down on the projector to lower it. !WARNING: To reduce the risk of the projector tipping or...
Page 19
MP1600 Microportable Projector 1-13 Writer: M. Silvetti Saved by: Marianne Silvetti Saved date: 11/08/99 5:08 PM Part Number:383706-001 File name: BkCh1.doc Adjusting the Projector Focus To focus the projected image, rotate the focus ring 1 until the image is clear. The projector will focus at distances from 3.3 feet to 35.64 feet (1 meter to 10.8 meters). If vertical bars appear on the display after adjusting the focus, press the Resync button 2 to automatically synchronize and track the...
Page 20
1-14 MP1600 Microportable Projector Writer: Marianne Silvetti Saved by: Marianne Silvetti Saved date: 11/08/99 5:08 PM Part Number:383706-001 File name: BkCh1.doc Image Size Adjustment Screen Diagonal42.2 56.2 84.3 112.5 140.6 168.7 196.9 225 253.1 281.2 Screen Width33.8 45 67.4 90 112.4 135 157.5 180 202.4 225 Screen Height25.3 33.7 50.6 67.5 84.4 101.2 118.1 135 151.9 168.7 Projection Distance4.9 6.6 9.8 13.1 16.4 19.7 23.0 26.2 29.5 32.8 .If the projector is used at the maximum distance in...