Compaq IPAQ Microportable Projector MP4800 Users Guide

Using the On-Screen Display Menu
Compaq iPAQ Microportable Projector MP4800 User’s Guide3–7
Explaining Functions in the On-Screen 
Display Menu
■Brightness—Adjusts the displayed image brightness. The 
default brightness value is 50%, and the settings range from 
0 to 100. Press the 
Minus(-) button to darken the image. Press 
the 
Plus (+) button to lighten the image.
■Contrast—Adjusts the displayed image contrast by changing 
the amount of black and white in the image. The default 
contrast value is...

3–8Compaq iPAQ Microportable Projector MP4800 User’s Guide
Using the On-Screen Display Menu
❏Clock Phase—Increases/decreases the value to minimize 
video distortion or video jitter. This selection is not 
available when a source is connected to the DVI 
connector.
✎If the projector image becomes distorted when adjusting the 
Clock and Clock Phase values, continue adjusting the values until 
the distortion disappears. To restore the factory settings, select 
Factory Reset in the on-screen display menu, or...

Using the On-Screen Display Menu
Compaq iPAQ Microportable Projector MP4800 User’s Guide3–9
■Language—Allows you to change the on-screen display to 
one of the languages in their native spelling. The current 
language is highlighted. Select another language to display 
all menu functions in that language.
■Management—Allows you to control lamp saver 
characteristics of the display, view the cumulative lamp 
hours, or set the OSD horizontal and vertical position, 
timeout, and transparency.
✎By default,...

3–10Compaq iPAQ Microportable Projector MP4800 User’s Guide
Using the On-Screen Display Menu
■Input Signal Out of Range. Please Change Display 
Mode—Indicates the projector is unable to access the 
appropriate input signal.
■Going to Standby—Indicates the projector is entering a 
sleep mode or is powering off the lamp.
■Adjusting—Indicates the Resync button has been pressed or 
the Factory Reset option has been selected from the OSD 
menu. The message will disappear when the appropriate 
mode is detected...

Compaq iPAQ Microportable Projector MP4800 User’s Guide4–1
4
Using the Tripod Mount and
Ceiling Mount
Using the Tripod Mount
The Compaq Microportable Projector includes standard tripod 
mount capability on the bottom of the projector. This allows the 
projector to be mounted on tripods readily available at camera 
and other electronic stores.
ÅWARNING: The tripod should be capable of supporting a weight of at 
least seven pounds. Refer to the owner’s manual that came with your 
tripod for more...

4–2Compaq iPAQ Microportable Projector MP4800 User’s Guide
Using the Tripod Mount and Ceiling Mount
2. If there is a guide pin on the tripod mounting block, align it 
with the guide pin hole 
1 on the bottom of the projector.
3. Attach the tripod mounting block to the tripod mount hole 
2 
on the bottom of the projector.
261794-001.book  Page 2  Tuesday, January 22, 2002  2:20 PM 

Using the Tripod Mount and Ceiling Mount
Compaq iPAQ Microportable Projector MP4800 User’s Guide4–3
4. Attach the projector and tripod mounting block to the tripod 
according to the tripod manufacturer’s instructions.
261794-001.book  Page 3  Tuesday, January 22, 2002  2:20 PM 

4–4Compaq iPAQ Microportable Projector MP4800 User’s Guide
Using the Tripod Mount and Ceiling Mount
Using the Ceiling Mount
The projector also includes ceiling mount capability on the 
bottom of the projector. This allows the projector to be mounted 
from the ceiling using any ceiling mount bracket that matches the 
screw hole configuration on the projector.
✎An optional ceiling mount bracket with the correct screw hole 
configuration is available from Compaq. The kit also includes 
20 foot cables. For...

Using the Tripod Mount and Ceiling Mount
Compaq iPAQ Microportable Projector MP4800 User’s Guide4–5
To use the projector with a ceiling mount bracket:
1. Carefully turn the projector upside down.
2. Line up the screw holes on the projector 
1 with the screw 
holes on the ceiling mount bracket.
3. Tighten the screws.
4. Connect any necessary cables.
5. Access the on-screen display menu and select Image 
Control. Then select Flip Image.
✎Refer to Chapter 3, “Using the On-Screen Display Menu” for 
more...

4–6Compaq iPAQ Microportable Projector MP4800 User’s Guide
Using the Tripod Mount and Ceiling Mount
261794-001.book  Page 6  Tuesday, January 22, 2002  2:20 PM