Compaq IPAQ Microportable Projector MP1200 Users Guide

Using the On-Screen Display Menu
Compaq iPAQ Microportable Projector MP1200 User’s Guide3–9
Explaining Functions in the On-Screen 
Display Menu
■Brightness—Adjusts the displayed image brightness. The 
default brightness value is 50%, and the settings range from 
0 to 100. Press the 
Minus(-) button to darken the image. Press 
the 
Plus (+) button to lighten the image.
■Contrast—Adjusts the displayed image contrast by changing 
the amount of black and white in the image. The default 
contrast value is...

3–10Compaq iPAQ Microportable Projector MP1200 User’s Guide
Using the On-Screen Display Menu
❏Vertical Keystone—Adjusts image distortion at the top 
and bottom widths of the screen caused by tilting the 
projector.
❏Flip Image—Allows the projected image to be rotated.
■Color—Adjusts color balance to compensate for ambient 
conditions using three submenus:
❏7100 K—Factory default
❏Custom Color—Modifies the color temperature balance. 
Displayed only when VGA sources are displayed. You 
can independently...

Using the On-Screen Display Menu
Compaq iPAQ Microportable Projector MP1200 User’s Guide3–11
■A/V & HDTV Control—Allows you to stretch the format to 
fill the screen or to use the original aspect ratio and fill the 
screen, using HDTV (High Definition Television) format. 
Refer to the “HDTV Modes” section of Chapter 6 for more 
information. Also allows color space selection, audio 
preference selection, and Gamma adjustment.
■Picture in Picture—Turns picture in picture (PIP) mode on 
and off. Also allows...

3–12Compaq iPAQ Microportable Projector MP1200 User’s Guide
Using the On-Screen Display Menu
■Multiple inputs are active. Use the OSD to select the 
alternate sources—The projector has detected multiple 
inputs. This message may appear when powering up, 
returning from Standby, or when the 
Source button is pressed 
on the projector or remote control. If no selection is made 
within 10 seconds, the currently displayed source will remain 
as the active source. Press the 
Source button on top of the...

Compaq iPAQ Microportable Projector MP1200 User’s Guide4–1
4
Using the Ceiling Mount
The projector includes ceiling mount capability on the bottom of 
the projector. This allows the projector to be mounted from the 
ceiling using any ceiling mount bracket that matches the screw 
hole configuration on the projector.
An optional ceiling mount bracket with the correct screw hole 
configuration is available from Compaq. The kit also includes 
15 foot cables. For information on purchasing the optional ceiling...

4–2Compaq iPAQ Microportable Projector MP1200 User’s Guide
Using the Ceiling Mount
To use the projector with a ceiling mount bracket:
1. Carefully turn the projector upside down.
2. Line up the screw holes on the projector 
1 with the screw 
holes on the ceiling mount bracket.
3. Tighten the screws.
4. Connect any necessary cables.
5. Access the on-screen display menu and select Image 
Control. Then select Flip Image.
✎Refer to Chapter 3, “Using the On-Screen Display Menu,” for 
more information.
6....

Using the Ceiling Mount
Compaq iPAQ Microportable Projector MP1200 User’s Guide4–3
261799-001.book  Page 3  Thursday, April 25, 2002  3:13 PM 

Compaq iPAQ Microportable Projector MP1200 User’s Guide5–1
5
Using the Remote Control
The optional remote control has many convenient features. It 
allows remote use of many of the functions of the projector 
buttons.
Before using the remote control, be sure steps 1 through 3 have 
been completed under “Powering On the Projector” in Chapter 2.
261799-001.book  Page 1  Thursday, April 25, 2002  3:13 PM 

5–2Compaq iPAQ Microportable Projector MP1200 User’s Guide
Using the Remote Control
Identifying the Remote Control 
Components
Identifying the Remote Control Components
Item Component Function
1Resync button Re-synchronizes the projector with the 
input source
2On-screen Menu button Launches the on-screen display menu
3Enter/Accept button Accepts the current selection and/or 
displays the next OSD menu level
4Zoom in button Zooms in to a specific area on the 
screen
5Zoom out button Zooms out to include...

Using the Remote Control
Compaq iPAQ Microportable Projector MP1200 User’s Guide5–3
Follow the instructions in the “Adjusting the On-Screen Display 
Menu” section of Chapter 3 to make adjustments to the on-screen 
display menu.
Remote Control Functions
The remote control duplicates the functions of the projector 
buttons including adjusting the on-screen buttons.
The remote control will work up to 26.25 feet (8.0 meters) from 
the projector when pointed directly at the sensor or 19.69 feet 
(6.0 meters)...