Compaq hp pavilion ze5200 notebook pc User Manual

							 
Features 
The following three illustrations show the notebook’s main external features. For an exploded view of 
the notebook, see page 4-2. 
  
 
Figure 1-1. Front View 
1. Notebook open/close latch. 
2. One-touch buttons. 
3. Keyboard status lights. 
4. Power button. Turns the notebook on and off. 
5. Touch pad, scroll pad, click buttons, plus on-off 
button. 
6. Main status lights (left to right): power mode, hard 
disk activity, battery. 
7. Microphone option (not available). 
8. Infrared port.* 
9. Wireless on-off button and indicator light.* 
10. Battery. 
11. CD-ROM, DVD, or other drive. 
12. PS/2 keyboard or PS/2 mouse port (supports Y 
adapter). 
* on certain models 
Service Manual Product Information 1-15  
						

							 
  
 
Figure 1-2. Back View 
13. AC adapter jack. 
14. Two universal serial bus (USB) ports. 
15. LAN port.* 
16. S-video port.* 
17. Parallel port (LPT1). Use this port for a 
parallel printer or other parallel device. 
18. Serial port (COM1). Use this port for a serial 
mouse, modem, printer, or other serial 
device. 
19. External monitor port. 
20. Kensington lock slot (security connector). 
21. Modem port.* 
22. PCMCIA card and CardBus slot and button. 
23. IEEE 1394 port.* 
24. Audio jacks (left to right): external microphone, audio out 
(headphones). 
25. Volume controls.* 
26. Audio mute button and audio mute light.* 
27. Floppy drive.* 
* on certain models 
  
1-16 Product Information Service Manual  
						

							 
 
Figure 1-3. Bottom View 
28. Hard disk drive. 
29. Battery latch. 
30. SDRAM door. 
31. Reset button. 
32. Port replicator connect.* 
33. Mini-PCI door (no user parts inside).  
* on certain models 
Service Manual Product Information 1-17  
						

							 
Operation 
This section gives an overview of the notebook’s operation. 
Turning the Notebook On and Off 
You can start and stop your notebook using its power button. However, at certain times you might 
want to use other methods to start or stop the notebook—depending on power considerations, types of 
active connections, and start-up time. 
 
Note 
This manual describes the notebook in its original factory configuration, with all settings at their 
default values. 
 
Table 1-3. Activating Power Modes 
Power mode To enter this mode 
On 
Power mode status light is on. 
Press the power button. 
Standby mode 
Saves significant power. 
Turns off the display and other components. 
Maintains current session in RAM. 
Restarts quickly. 
Restores network connections. 
Power mode status light blinks. 
Press the power button  
–or– 
click Start > Turn Off Computer > Stand By 
(Windows XP) 
–or– 
click Start > Shut Down > Standby (Windows 2000) 
–or– 
allow timeout. 
Hibernation mode 
Saves maximum power. 
Saves current session to disk, then shuts down. 
Restores network connections. 
Power mode status light is off. 
Press Fn+F12 
–or– 
click Start > Shut Down > Hibernate (Windows 2000) 
–or– 
allow timeout. 
Shut down (off) 
Saves maximum power. 
Turns off without saving current session. 
At startup, resets everything, starts a new session, and 
restores network connections. 
Power mode status light is off. 
Click Start > Turn Off Computer > Turn Off 
(Windows XP) 
–or– 
click Start > Shut Down > Shut down (Windows 2000) 
–or– 
press the power button for 4 seconds (only if the Start 
menu procedure doesn’t work). 
To turn on: Press the power button to restart, or to resume your session from Standby or Hibernation mode. 
1-18 Product Information Service Manual  
						

							 
Checking the Status of the Notebook 
The main status lights on the front of the notebook report power status, battery status, and hard disk 
activity. 
Table 1-4. Main Status Lights (front of notebook) 
           Meaning 
 Power status 
On: notebook is on (even if the display is off). 
Blinking: notebook is in Standby mode. 
Off: notebook is off or in Hibernation mode. 
 Hard disk drive activity 
On: notebook is accessing the hard disk drive. 
 Battery status 
Green: The AC adapter is connected and the battery is fully charged. 
Amber: The AC adapter is connected and the battery is charging. 
Blinking: The AC adapter is connected and the battery is missing or has a fault. 
Off: The AC adapter is not connected. 
 
The keyboard status lights, located above the keyboard, indicate the states of the keyboard locks. 
Table 1-5. Keyboard Status Lights 
                   Meaning 
 Caps Lock 
Caps Lock is active. 
 Num Lock 
Num Lock is active. (The Keypad Lock must also be on to use the embedded 
keypad.) 
 Keypad Lock 
The embedded keypad is active (Fn+F8). Num Lock must also be on for the 
numeric keys; otherwise, cursor control is active (as marked on an external 
keyboard). 
 
Service Manual Product Information 1-19  
						

							 
Using Fn Hot Keys 
The combination of the Fn key plus another key creates a hot key—a shortcut key sequence—for 
various system controls. To use a hot key, press and hold Fn, press the appropriate second key, then 
release both keys. 
Table 1-6. Fn Hot Keys 
Hot Key Effect 
Fn+F1 Decreases the display brightness. 
Fn+F2 Increases the display brightness. 
Fn+F5 Toggles among the built-in display, an external display, and simultaneous display on 
both. 
Fn+F8 Toggles the built-in keypad on and off. Does not affect an external keyboard. If Num 
Lock is on, then the numeric functions are active; otherwise, cursor control is active 
(as marked on an external keyboard). 
Fn+F12 Enters Hibernation mode. 
Fn+NumLock Toggles Scroll Lock on and off. 
Fn+Page Up Increases the audio volume and cancels the mute setting. 
Fn+Page Down Decreases the audio volume. 
Fn+Backspace Audio mute. 
1-20 Product Information Service Manual  
						

							 
Resetting the Notebook 
Occasionally, Windows or the notebook might stop responding, so that you cannot turn the notebook 
off. If this happens, try the following in the order listed. Press the power button to restart. 
• If possible, shut down Windows: 
 
Windows XP: press CTRL+ALT+DEL, and then click Shut Down, Restart. 
 
Windows 2000: press CTRL+ALT+DEL, click Shut Down, and press the power button to restart. 
• Press and hold the power button for about four seconds until the display shuts down, and then 
press the power button again to restart. 
• Use a ball-point pen or a straightened paper clip to press the reset butto\
n on the bottom of the 
notebook. 
 
 Figure 1-4. Resetting the Notebook 
Note 
To boot from a CD, insert a bootable CD (such as the Recovery CDs) into the CD/DVD drive, 
then restart. Press Esc when the HP logo appears, then select the CD/DVD drive as the 
temporary boot device. 
Service Manual Product Information 1-21  
						

							 
Specifications 
The following tables list the specifications for the notebook and its ac\
cessories. These are subject to 
change: for the latest versions, see the HP Notebook Web site (www.hp.c\
om/notebooks). 
Table 1-7. Specifications 
Physical Attributes Size (14-inch display): 328 × 272 × 33 mm (12.9 × 10.7 × 1.3 in). 
Size (15-inch display): 328 × 272 × 35 mm (12.9 × 10.7 × 1.4 in). 
Weight: 2.9 kg (6.5 lb) minimum, depending on configuration. 
Processor and  
Bus Architecture 
HP Pavilion ze5200: 
2.00-, 2.40-, 2.53-, 2.66-, or 2.80-GHz Intel Desktop Pentium 4 processor-D with Intel 
Speed Step technology, 512-KB L2 cache, and 1.2- to 1.3-V core low-power 
processor with 400-MHz processor system bus. 
HP Pavilion ze4200: 
1.8-, 1.9-, 2.0-, or 2.2-GHz Intel Mobile Pentium 4 processor-M with Intel Speed Step 
technology, 512-KB L2 cache, and 1.2- to 1.3-V core low-power processor with 
400-MHz processor system bus. 
or 
1.6-, 1.7-, 1.8-, or 2.0-GHz Intel Mobile Celeron processor with 256-KB L2 cache and 
1.45-V core low-power processor with 133-MHz processor system bus. 
or 
1.46-, 1.53-, 1.67-, or 1.80-GHz Athlon processor with 256-KB L2 cache and 1.45-V 
core low-power processor with 133-MHz processor system bus. 
HP Pavilion ze4100: 
1.7-, 1.8-, or 2.0-GHz Intel Mobile Pentium 4 processor-M with Intel Speed Step 
technology, 512-KB L2 cache, and 1.2- to 1.3-V core low-power processor with 
400-MHz processor system bus. 
or 
1.6-, 1.7-, or 1.8-GHz Intel Mobile Celeron processor with 256-KB L2 cache and 
1.45-V core low-power processor with 133-MHz processor system bus. 
Compaq Evo Notebook N1050: 
1.8-GHz Intel Mobile Pentium 4 processor-M with Intel Speed Step technology, 
512-KBL2 cache, and 1.2- to 1.3-V core low-power processor with 400-MHz 
processor system bus. 
or 
1.6-GHz Intel Mobile Celeron processor with 256-KB L2 cache and 1.45-V core 
low-power processor with 133-MHz processor system bus. 
Compaq Presario 2500:  
2.00-, 2.40-, 2.53-, 2.60-, 2.66-, or 2.80-GHz Intel Desktop Pentium 4 processor-D 
with Intel Speed Step technology, 512-KB L2 cache, and 1.2- to 1.3-V core low-power 
processor with 400-MHz processor system bus. 
 
1-22 Product Information Service Manual  
						

							 
 
Processor and  
Bus Architecture 
(continued) 
Compaq Presario 2100: 
1.8-, 1.9-, 2.0-, or 2.2-GHz Intel Mobile Pentium 4 processor-M with Intel Speed Step 
technology, 512-KB L2 cache, and 1.2- to 1.3-V core low-power processor with 
400-MHz processor system bus. 
or 
1.6-, 1.7-, 1.8-, or 2.0-GHz Intel Mobile Celeron processor with 256-KB L2 cache and 
1.45-V core low-power processor with 133-MHz processor system bus. 
or 
1.46-, 1.53-, 1.67-, or 1.80-GHz Athlon processor with 256-KB L2 cache and 1.45-V 
core low-power processor with 133-MHz processor system bus. 
Compaq Evo Notebook N1010v and Presario 1010: 
1.6- or 1.8-GHz Intel Mobile Celeron processor with 256-KB L2 cache and 1.45-V 
core low-power processor with 133-MHz processor system bus. 
Video 14.1-inch XGA (1024 × 768), or 15.0-inch XGA (1024 × 768) or SXGA+ 
(1400 × 1050) active-matrix (TFT) LCD display. 
Hardware 3D acceleration, hardware DVD acceleration. 
External monitors up to 1600 × 1200 resolution, 16M colors, and at least 85 Hz 
refresh rate (only 60 Hz at 1400 × 1050). Refresh rate and clarity may vary 
depending on monitor, resolution, and color depth. 
ATI Mobility Radeon graphics accelerator with 16- or 32-MB DDR graphics memory, 
4x AGP graphics capability. 
Dual display capability (depends on operating system support). 
Power Rechargeable lithium-ion (14.8 Vdc) or nickel-metal-hydride (9.6 Vdc) battery with 
LED charge-level gauge. 
Battery life: up to 3 (LiIon) or 2 hours (NiMH) hours typical (varies with model, usage, 
and power settings). 
Fast battery recharge: 2 hours when system is off, 3 hours when system is on. 
Low-battery warning.  
Suspend/resume capability. 
Universal AC adapter: 100–240 Vac (50/60 Hz) input, 19 Vdc output, \
75 W. 
Mass Storage 20- to 40-GB removable hard drive with Ultra-DMA 100 interface. 
1.44-MB floppy drive (certain models). 
24x CD-ROM, or 8x DVD, or CD-RW, or CD-RW/DVD drive (or higher). 
RAM At least 128 MB SDRAM preinstalled. 
HP Pavilion ze5200, ze4200, ze4100, Compaq Evo N1050v, 
Compaq Presario 2500, and Compaq Presario 2100 
Two slots for PC2100 DDR-266 SDRAM modules. 
Up to 1 GB (1024 MB) SDRAM using 512 MB modules. 
Compaq Evo N1010v and Presario 1100 
Two slots for PC2100 DDR-266 SDRAM modules. 
Up to 512 MB SDRAM using 256 MB modules. 
Audio System Stereo sound via two built-in speakers. 
3D-enhanced audio. 
Volume and mute buttons (certain models). 
Headphone-out and microphone-in. 
Keyboard and  
Pointing Device 
87/88-key touch-type QWERTY keyboard with 101/102 key emulation. 
Embedded numeric keypad. 
12 function (Fn) keys. 
5 user-programmable One-Touch buttons. 
Touch pad with integrated scroll pad, on-off button and indicator. 
Left and right click buttons. 
LAN 
(certain models) 
Ethernet 10Base-T (10 Mbps) and 100Base-TX (100 Mbps) support. 
Supports wake-on-LAN, fast IP, DMI, dRMON. 
MBA (Managed Boot Agent) support for PXE/BINL, NCP/IPX, DHCP. 
Service Manual Product Information 1-23  
						

							 
Modem 
(certain models) 
Software-based modem. 
Data speed: 56 Kbps (V.92) maximum. 
Fax speed: 14.4 Kbps, Class 1 and 2. 
Modulation: V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34, V.90, V.92, X2, Bell 103, 
Bell 212A. 
Synchronous transfer: V.80. 
Compression: V.42bis, MNP5. 
Error correction: V.42, MNP2-4. 
Fax: Group 3 fax, Class 1. V.17, V.27ter, V.29, V.21. 
Wireless LAN 
(certain models) 
Radio: IEEE 802.11b, WECA Wi-Fi compliant, direct-sequence spread-spectrum. 
Operating frequency: 2.5-GHz ISM band, exact frequencies and channels depend on 
country. 
Raw data rate: 1, 2, 5.5, or 11 Mbps. 
Transmitter output: 15 dBm typical (approx. 30 mW), 16 dBm max (approx. 40 mW). 
Receiver sensitivity: –84 dBm typical. 
Range: up to 100 m (300 ft) or more, depending on environment and cond\
itions. 
On-off button and indicator. 
Mini-PCI interface. 
Input/Output 9-pin, 115,200-bps serial. 
25-pin bi-directional ECP/EPP parallel. 
15-pin VGA video-out with DDC support. 
S-video TV out (certain models). 
PS/2 keyboard/mouse. 
4-Mbps IrDA-compliant infrared port (certain models). 
IEEE-1394 (certain models). 
Universal serial bus (USB 1.1), two ports. 
Expandability One or two 16-/32-bit PC Card slots, Type II or III, CardBus enabled. 
Optional port replicator (certain models). 
Security Features User and administrator passwords. 
System password. 
PC identification displayed at boot. 
WMI-accessible electronic serial number. 
Kensington MicroSaver lock slot. 
Environmental Limits Operating temperature: 5 to 35° C (41 to 95° F). 
Operating humidity: 20 to 90 percent RH (5 to 35° C). 
Operating altitude: up to 3000 m (10,000 ft) at 25° C (77° F). 
Storage temperature: –20 to 50° C (–4 to 122° F). 
Major ICs CPU: Intel Mobile Pentium 4 processor-M. 
Core logic: ALI 1671/1535+ chipset. 
Display controller: ATI Mobility Radeon M6-C/P. 
Audio/Modem controller: Conexant Smart AMC CX20468-21. 
CardBus controller: TI PC1520. 
Keyboard/embedded controller: National PC87570. 
Super I/O: integrated in core logic. 
IEEE 1394: TI TSB43AB22. 
LAN: National NS83815. 
802.11b wireless LAN: Ambit with Intersil Prism 2.5 chipset. 
or 
CPU: Intel Mobile Celeron processor. 
Core logic: VIA Twister-T + VT8231 chipset. 
Display controller: S3 Savage Pro integrated in core logic. 
Audio/Modem controller: Conexant Smart AMC CX20468-21. 
CardBus controller: O2Micro 6912. 
Keyboard/embedded controller: National PC87570. 
Super I/O: integrated in core logic. 
LAN: VIA Phy, MAC integrated in core logic. 
802.11b wireless LAN: Ambit with Intersil Prism 2.5 chipset. 
1-24 Product Information Service Manual