compaq armada 100s and User Manual
Have a look at the manual compaq armada 100s and User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 65 Compaq manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Removal and Replacement Procedures5-15 COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Writer: David Calvert Saved by: The Integrity Group Saved date: 09/27/00 9:24 AM Part Number: 177845-002 File name: Ch05 Installing a Memory Expansion Board All memory expansion boards are asymmetrically keyed (notched) to ensure correct positioning. 1. Insert the memory expansion board into an empty memory expansion slot at a 45-degree angle (Figure 5-14). 2. Push the memory expansion board down until the board is seated in the plastic retention clips. Figure 5-14. Installing a Memory Expansion Board
5-16Removal and Replacement Procedures COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Writer: David Calvert Saved by: The Integrity Group Saved date: 09/27/00 9:24 AM Part Number: 177845-002 File name: Ch05 5.10 Top Cover Top Cover Spare Part Numbers Top cover 176043-001 1. Prepare the computer for disassembly (Section 5.3). 2. Turn the computer bottom side up, with the front facing forward. 3. Remove the six screws securing the top cover to the base assembly (Figure 5-15). Figure 5-15. Removing the Top Cover Screws 4. Turn the computer top side up, with the front facing forward. 5. Open the computer.
Removal and Replacement Procedures5-17 COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Writer: David Calvert Saved by: The Integrity Group Saved date: 09/27/00 9:24 AM Part Number: 177845-002 File name: Ch05 6. Lift up the front edge of the top cover and swing it toward the back of the computer (Figure 5-16). Figure 5-16. Removing the Top Cover 7. Remove the top cover. IMPORTANT: When installing the top cover, align the five tabs on the back edge of the top cover with the slots in the speaker housing.
5-18Removal and Replacement Procedures COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Writer: David Calvert Saved by: The Integrity Group Saved date: 09/27/00 9:24 AM Part Number: 177845-002 File name: Ch05 5.11 Hard Drive Hard Drive Spare Part Numbers 5.0 GB hard drive 176040-001 1. Prepare the computer for disassembly (Section 5.3). 2. Remove the top cover (Section 5.10). 3. Remove the two screws securing the hard drive to the base assembly (Figure 5-17). 4. Lift up the right side of the hard drive , and then pull the hard drive to the right to disconnect it from the TouchPad assembly. Figure 5-17. Removing the Hard Drive 5. Remove the hard drive. Reverse the removal procedure to replace the hard drive.
Removal and Replacement Procedures5-19 COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Writer: David Calvert Saved by: The Integrity Group Saved date: 09/27/00 9:24 AM Part Number: 177845-002 File name: Ch05 5.12 Real Time Clock (RTC) Battery NOTE: Removal of the RTC battery clears all information from CMOS. Real Time Clock Battery Spare Part Numbers Real time clock battery (spared in Hardware Kit) 176049-001 1. Prepare the computer for disassembly (Section 5.3). 2. Remove the top cover (Section 5.10). 3. Disconnect the RTC battery cable from the TouchPad (Figure 5-18). 4. Remove the RTC battery from the base assembly . Figure 5-18. Removing the RTC Battery Reverse the removal procedure to replace the RTC battery.
5-20Removal and Replacement Procedures COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Writer: David Calvert Saved by: The Integrity Group Saved date: 09/27/00 9:24 AM Part Number: 177845-002 File name: Ch05 5.13 Keyboard Keyboard Spare Part Numbers Keyboard 176041-XXX Arabic Belgian Brazilian Danish French German Hungarian International Italian Japanese-171 -181 -201 -081 -051 -041 -211 -002 -061 -291Korean Latin American Spanish Norwegian Portuguese Spanish Swedish Swiss U.K. English U.S. English-AD1 -161 -091 -131 -071 -101 -111 -031 -001 1. Prepare the computer for disassembly (Section 5.3). 2. Remove the top cover (Section 5.10).
Removal and Replacement Procedures5-21 COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Writer: David Calvert Saved by: The Integrity Group Saved date: 09/27/00 9:24 AM Part Number: 177845-002 File name: Ch05 3. Lift up the front edge of the keyboard and swing it back toward the display (Figure 5-19). 4. Release the ZIF (zero insertion force) connector to which the keyboard cable is attached . 5. Disconnect the keyboard cable from the system board . Figure 5-19. Releasing the Keyboard and Disconnecting the Keyboard Cable 6. Remove the keyboard. IMPORTANT: When installing the keyboard, align the three tabs on the back edge of the keyboard with the slots in the EMI shield.
5-22Removal and Replacement Procedures COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Writer: David Calvert Saved by: The Integrity Group Saved date: 09/27/00 9:24 AM Part Number: 177845-002 File name: Ch05 5.14 EMI Shield EMI Shield Spare Part Numbers EMI shield 176002-001 1. Prepare the computer for disassembly (Section 5.3). 2. Remove the top cover (Section 5.10). 3. Remove the keyboard (Section 5.13). 4. Remove the 12 screws securing the EMI shield to the base assembly (Figure 5-20). NOTE: Three different sizes of screws are removed in this step: the silver screws are removed/installed in location ; the longer black screws are removed/installed in location ; the shorter black screw is removed/installed in location . Also note that one of the silver screws secures the display ground cable to the EMI shield. Figure 5-20. Removing the EMI Shield Screws
Removal and Replacement Procedures5-23 COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Writer: David Calvert Saved by: The Integrity Group Saved date: 09/27/00 9:24 AM Part Number: 177845-002 File name: Ch05 5. Lift up the front edge of the shield and swing it toward the back of computer (Figure 5-21). Figure 5-21. Removing the EMI shield 6. Remove the EMI shield. Reverse the removal procedure to replace the EMI shield.
5-24Removal and Replacement Procedures COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Writer: David Calvert Saved by: The Integrity Group Saved date: 09/27/00 9:24 AM Part Number: 177845-002 File name: Ch05 5.15 TouchPad TouchPad Spare Part Numbers TouchPad176044-001 1. Prepare the computer for disassembly (Section 5.3) and, in the order below, remove the following components: Top cover (Section 5.10) Hard drive (Section 5.11) RTC battery (Section 5.12) Keyboard (Section 5.13) EMI shield (Section 5.14) 2. Lift the back edge of the TouchPad to disconnect it from the system board (Figure 5-22). 3. Remove the TouchPad . Figure 5-22. Removing the TouchPad Reverse the removal procedure to replace the TouchPad.