compaq armada 100s and User Manual
Here you can view all the pages of manual compaq armada 100s and User Manual. The Compaq manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 81
Removal and Replacement Procedures5-25 COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Writer: David Calvert Saved by: The Integrity Group Saved date: 09/27/00 9:24 AM Part Number: 177845-002 File name: Ch05 5.16 Speakers Speakers Spare Part Numbers Speakers (2; spared in Hardware Kit) 176049-001 1. Prepare the computer for disassembly (Section 5.3) and, in the order below, remove the following components: Top cover (Section 5.10) Keyboard (Section 5.13) EMI shield (Section 5.14) 2....
Page 82
5-26Removal and Replacement Procedures COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Writer: David Calvert Saved by: The Integrity Group Saved date: 09/27/00 9:24 AM Part Number: 177845-002 File name: Ch05 5.17 Display Assembly Display Assembly Components Spare Part Numbers 13.3-inch panel, TFT (used only with config. codes beginning with “FQ6”)204204-001 12.1-inch panel, HPA (used only with config. codes beginning with “FFF” and “FQ4”)222714-001, 216081-001, and 176037-001 12.1-inch panel, TFT...
Page 83
Removal and Replacement Procedures5-27 COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Writer: David Calvert Saved by: The Integrity Group Saved date: 09/27/00 9:24 AM Part Number: 177845-002 File name: Ch05 3. Open the computer as far as it will open. 4. Disconnect the display video cable , display inverter cable , and microphone cable (Figure 5-25). Figure 5-25. Disconnecting the Display Cables
Page 84
5-28Removal and Replacement Procedures COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Writer: David Calvert Saved by: The Integrity Group Saved date: 09/27/00 9:24 AM Part Number: 177845-002 File name: Ch05 5. Remove the four screws securing the display hinges to the base assembly (Figure 5-26). 6. Remove the display assembly . NOTE: Make sure the display assembly is supported and does not fall when the screws are removed. Figure 5-26. Removing the Display Assembly
Page 85
Removal and Replacement Procedures5-29 COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Writer: David Calvert Saved by: The Integrity Group Saved date: 09/27/00 9:24 AM Part Number: 177845-002 File name: Ch05 When installing the display assembly, make sure the display video cable is routed behind the left speaker connector on the system board (Figure 5-27). Figure 5-27. Routing the Display Video Cable
Page 86
5-30Removal and Replacement Procedures COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Writer: David Calvert Saved by: The Integrity Group Saved date: 09/27/00 9:24 AM Part Number: 177845-002 File name: Ch05 When replacing the system board or display assembly, it is imperative that the DIP switches be set correctly. To set the display DIP switches on the system board, follow these steps: 1. Locate the part number label on the display microphone cable (Figure 5-28). 2. Part numbers...
Page 87
Removal and Replacement Procedures5-31 COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Writer: David Calvert Saved by: The Integrity Group Saved date: 09/27/00 9:24 AM Part Number: 177845-002 File name: Ch05 5.18 Speaker Housing Speaker Housing Spare Part Numbers Speaker housing (spared in Plastics Kit) 176048-001 I/O cover (spared in Plastics Kit) 176048-001 1. Prepare the computer for disassembly (Section 5.3) and, in the order below, remove the following components: Top cover (Section 5.10) ...
Page 88
5-32Removal and Replacement Procedures COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Writer: David Calvert Saved by: The Integrity Group Saved date: 09/27/00 9:24 AM Part Number: 177845-002 File name: Ch05 6. Remove the five screws securing the speaker housing to the base assembly (Figure 5-30). 7. Remove the speaker housing . Figure 5-30. Removing the Speaker Housing Reverse the removal procedure to replace the speaker housing.
Page 89
Removal and Replacement Procedures5-33 COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Writer: David Calvert Saved by: The Integrity Group Saved date: 09/27/00 9:24 AM Part Number: 177845-002 File name: Ch05 5.19 System Board System Board Spare Part Numbers 64 MB SDRAM (used only with config. codes beginning with “FQ5” and “FQ6”)207657-001 64 MB SDRAM (used only with config. codes “FQ45”, “FQ47”, and “FQ48”)207656-001 64 MB SDRAM (used only with config. codes “FFG1” through “FFG4”)189047-001 64 MB...
Page 90
5-34Removal and Replacement Procedures COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED Writer: David Calvert Saved by: The Integrity Group Saved date: 09/27/00 9:24 AM Part Number: 177845-002 File name: Ch05 3. Remove the two screws securing the system board to the base assembly (Figure 5-31). Figure 5-31. Removing the System Board Screws 4. Turn the computer top side up with the front facing forward.