Comdial Dxp Non-LCD Station Users Guide

							7.9 Using Background Music
NOTE: This feature is not available on the 8112N and 8212N
telephones.
If the telephone system supplies background music, you can turn it on at
your speakerphone while it is on-hook and idle. The system
automatically turns background music off during calls and voice
announcements.
NOTE: The system can provide music from two sources; however, the
system installer must enable this feature.
·To turn the music on,
1. PressINTERCOM.
2. DialS11for music source one orS12for music source two (the
SPEAKERlight turns on when background music is on).
3. Adjust music volume with the volume button.
·To turn the music off,
1. PressINTERCOM.
2. Dial#1(theSPEAKERlight turns off when background music is
off).
GCA70–313 Using The Other Telephone Features
Station Users Guide 7 – 9 
						

							7.10 Using The IMIST Module
Impact SCS8212S and 8212N telephones equipped with the optional
IMIST module can support an IST device (modem, FAX machine,
industry-standard telephone, etc.) in addition to the telephone.
Depending on system programming, you can use the IST device to make
outgoing calls and receive incoming calls.
The functionality of the IMIST module depends on the type of system
you are using and the type of digital station board and memory board
your system has. (See your installer for complete details.)
•The IMIST module will function on a DXP system with the
appropriate digital station board, but the IMIST module will not have
its own extension number and will not function simultaneously with
the speakerphone.
•On a DXPPlussystem, the IMIST module will function
simultaneously with the speakerphone and have its own extension
number if your system has the appropriate digital station board and
memory board. If your system does not have the optional enhanced
memory board, the IMIST module will function like the one on the
DXP system described above.
•On an FX Series system, the speakerphone and IMIST module can
function simultaneously and the IMIST module has its own
extension number.
NOTE: The IMIST module does not provide voltage to light a message
waiting light. Message waiting lights on devices plugged into
the IMIST module will not function
If you have any other questions about IST devices, refer to GCA70–237,
Industry-Standard Telephone Station User’s Guide.
NOTE: The IMIST module has a separate power supply. The wall
transformer is a UL and CSA approved Class 2 device operating from
120 Vac, 60 Hz, 16 watts and provides an output of 24 Vac at 450 mA.
For replacement, order Comdial P/N DIU-PTR.
scs04
Power
IST Device
IMIST Device
Using The Other Telephone Features GCA70–313
7 – 10 Station Users Guide 
						

							Sending And Receiving
Non-Verbal Messages
8.1 Using The Messaging Feature
If the system installer designates your speakerphone as a central message
desk or programs it to have message-wait originate ability, you can turn
on the message-waiting light of any other telephone. This light lets that
telephone user know that you have a message for him or her. In addition
to the message waiting light, leaving a message indication at a station
also causes the dial tone at that station to sound in a broken manner when
the station user takes his or her telephone off-hook.
The message-waiting light is located in different places on the various
model telephones. On the 8124S and 8112S telephones, the message
waiting light is located above the HOLD button. On the 8112N
telephone, the message waiting light is located above the dial pad. The
8212S and 8212N telephones have a dedicated message waiting key and
light, labeled MESSAGE. For more information on button locations, see
Chapter 1.
If your telephone receives a message and has a DSS button that is
programmed to call the station that left the message, the light next to that
station’s DSS button on your telephone will flash.
8
GCA70–313 Programming Your Telephone
Station Users Guide 8 – 1 
						

							8.2 Lighting The Message-Waiting Light
·To turn on the message-waiting light (and a broken dial tone) at
an idle telephone,
1. PressINTERCOM.
2. DialS3.
3. Dial extension number of station you wish to alert.
The message-waiting light of that station will flash.
·To turn off the message waiting light at a busy or idle station,
1. PressINTERCOM.
2. Dial#3.
3. Dial extension number of station that was alerted. The
message-waiting light of called station will turn off.
·To turn off the message waiting light during message-delivering
conversation,
1. PressINTERCOM; once if off-hook, twice if on-hook.
NOTE: If the message-waiting light can only be turned off by either
the person sending the message or the person receiving the
message.
Programming Your Telephone GCA70–313
8 – 2 Station Users Guide 
						

							8.3 Sending LCD Messages
You can set system-supplied messages at your station to be received and
displayed by a calling LCD speakerphone. These messages give the
caller information on your telephone status. Get a list of the available
messages from the attendant and write on the blank chart on the next
page.
·To turn on LCD messaging,
1. PressINTERCOM.
2. DialS02.
3. Press#to clear current message if one is stored.
4. Dial message code number (01–30).
5. Press#andthenpressSPEAKERto end message.
6. YourINTERCOMlight flashes to indicate you have set LCD
messaging.
·To send an LCD message when you call and receive a busy signal
or no answer,
1. While still on the call, press the appropriate fixedRESPONSE
MESSAGEbutton to send a preselected message (Call [your
name], for example) to the other telephone.
·To send an LCD message to a caller who has initiated a SOHVA
or intercom call from another LCD telephone,
1. Hear the SOHVA tone or voice announcement in your handset or
headset.
2. Press the appropriate fixedRESPONSE MESSAGEbutton to
send a preselected message (I Will Call Back, for example) to the
calling telephone.
GCA70–313 Programming Your Telephone
Station Users Guide 8 – 3 
						

							This page remains blank intentionally. 
						

							Programming
Your Telephone
9.1 Programming For Speed Dialing
Speed dialing is a feature that lets you:
•store and dial outside numbers using one or two buttons,
•store and dial intercom numbers,
•store frequently used feature codes.
Your can store numbers for speed dialing at the following locations:
•any programmable button that isnot now assigned as a line button
or other featureby the system administrator or installer,
•keypad numbers 0–9,
•a secondary level at either storage location.
Before you begin programming, write down the intercom or outside line
you will use and the number digits you are storing. Then, as you program
the speed dial numbers, write the first and second level numbers on your
telephone’s ID strips. You can also fill out the charts on the next page, if
you wish, for a personal record of your stored numbers.
NOTE: You cannot reprogram the HOLD and INTERCOM button
locations from your telephone; however, your installer can
reassign these buttons to other locations on your telephone or
to a console unit. Further, you cannot store a feature code on a
second level at any storage location.
NOTE: The Federal Communications Commission (FCC) requires
that when programming emergency numbers and/or making
test calls to emergency numbers:
1. Remain on the line and briefly explain to the dispatcher the
reason for the call.
2. Perform such activities in the off-peak hours, such as early
morning or late evening.
9
GCA70–313 Programming Your Telephone
Station Users Guide 9 – 1 
						

							9.2 Storing Speed Dial Numbers
·To store an outside number as a speed dial number,
NOTE: Programming overwrites existing speed dial numbers at button
locations.
1. PressINTERCOM.
2. DialSS1.
3. Press programmable button or dial pad button to choose storage
location (remember, to access second level storage at a
programmable button, pressSHIFTfirst.)
4. Make your speed dial route selection choice from the following list:
•press line button to select outside line,
•dial00to select prime line or last line used,
•dial01–16to select line group,
•pressINTERCOMbutton or dial8to select intercom.
5. Dial number (up to 16 digits long—includeSand#if needed).
NOTE: You may need a pause between numbers to compensate for
differences in response time between your system and the host
system (ask your attendant about this). To store a pause, press
HOLD, then continue dialing. If your system is behind a host
system that needs a hookflash to access a feature, press TAP to
store a hookflash, then continue dialing.
6. PressTRANSFER/CONFERENCEto store number.
7. Press next location button and store next number, repeat previous
steps until all numbers are stored,
—OR—
pressSPEAKERto end.
Programming Your Telephone GCA70–313
9 – 2 Station Users Guide 
						

							9.3 Storing DSS Numbers
·To store an intercom number at a DSS button,
NOTE: Storing DSS numbers at button locations will overwrite any
previously stored numbers.
1. PressINTERCOM.
2. DialSS3.
3. Press programmable button to choose DSS location.
4. Dial extension number.
5. Press next location button and store next DSS number.
6. Repeat the previous step until all DSS numbers are stored,
—OR—
pressSPEAKERto end.
GCA70–313 Programming Your Telephone
Station Users Guide 9 – 3 
						

							9.4 Storing Feature Buttons
If you find that you are using certain features often, you can create
feature access buttons to make operations easier. Some features you may
want to use frequently are defined as follows:
Account Code Button (ACCT)—allows you to enter an account code
for call record purposes.
Automatic Call-Back Button (CAMP)—arranges the system to ring
your telephone and another person’s telephone as soon as the other
telephone becomes idle.
Call Forward Button (CFWD)—allows you to forward all of your call
to another telephone. You can program any one of four different feature
buttons: Forward All (FWD-A), Forward Personal (FWD-P), Forward
All RNA (FWDRA), and Forward Personal RNA (FWDRP).
Do Not Disturb Button (DND)—prevents other telephones from ringing
your telephone.
Group Listen Button (GPLSN)—allows others to hear a conversation
over the telephone speaker while you use the handset or headset; the
distant party can hear only the conversation transmitted through the
handset or headset microphone.
Music Button (MUSIC)—allows you to enable or disable background
music; also allows you to choose from tow pre-programmed music
sources.
Page Button (PAGE 1–8)—provides one-button access to paging zones
1–8.
Park Button (PARK)—parks calls in preselected park orbit.
Pick-Up Button (PCKUP)—allows you to pick up a call ringing
elsewhere in your system.
Privacy Release Button (PRVCY)—releases privacy for current call.
Saved Number Redial Button (SAVE)—redials the last number saved
at this button location (good for short-term storage).
Voice-Announce Block Button (VABLK)—blocks voice
announcements.
Programming Your Telephone GCA70–313
9 – 4 Station Users Guide