Cisco Prime Nerk 43 User Guide

  
27-137
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  LTE Networks
Notify Payload - Half 
Open Session StartThe initial count of the number of half-open sessions per IPSec manager. 
Transmission of information will start only when the number of half-open 
sessions currently open exceed the starting count.
NoteA session is considered half open if a Packet Data Interworking 
Function (PDIF) has responded to an IKEv2 INIT request with an 
IKEv2 INIT response,...

  
27-138
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  LTE Networks
Allow  Empty  IKESA Indicates whether empty IKESA is allowed. By default, empty IKESA is not 
allowed.
Certificate Sign The certificate sign to be used. This field defaults to pkcs1.5.
Ignore Notify Protocol 
IDIndicates whether the IKEv2 Exchange Notify Payload Protocol-ID values 
must be ignored for strict RFCA 4306 compliance.
Ignore Rekeying 
RequestsIndicates whether IKESA rekeying...

  
27-139
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  LTE Networks
Viewing the EAP Profile Details
To view the EAP Profile details:
Step 1Right-click the required device in the Vision client and choose Inventory.
Step 2In the Logical Inventory window, choose Logical Inventory > Context> Security Association > 
EAP Profile. The list of profiles are displayed in the content pane.
Step 3In the EAP Profile node, choose the profile. The profile details are...

  
27-140
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  LTE Networks
Step 3In the IKEv2 IPSec Transform Set or IKEv2 Transform set node, choose the transform set. The 
relevant details are displayed in the content pane. 
Table 27-90 displays the IKEv2 IPSec Transform set or IKEv2 Transform set details. 

  
27-141
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  LTE Networks
Table 27-90 IKEv2 IPSec Transform Set/IKEv2 Transform set Details
Field Description
Name The name of the transform set.
DH Group The Diffie-Hellman (DH) group for the transform set, which can be any one 
of the following:
1—Configure Diffie-Hellman Group 1:768-bit MODP Group
14—Configure Diffie-Hellman Group 14:2048-bit MODP Group
2—Configure Diffie-Hellman Group 2:1024-bit MODP Group...

  
27-142
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  LTE Networks
Viewing the ePDG Configuration Details
To view the ePDG configuration details:
Step 1Right-click the required device in the Vision client and choose Inventory.
Step 2In the Logical Inventory window, choose Logical Inventory > Context> Mobile > EPDG. The list of 
EPDG services configured in Prime Network are displayed in the content pane. 
Step 3From the EPDG node, choose an EPDG service....

  
27-143
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  LTE Networks
Table 27-91 EPDG Service Details
Field Description
Service Name The unique name of the ePDG service.
Status The status of the ePDG service, which can be any one of the following:
Initiated
Running
Down
Started
Nonstarted
IP Address The IPV4 address of the ePDG service.
UDP Port The User Datagram Protocol (UDP) port of the ePDG service.
Crypto  Template The name of the IKEv2 crypto template...

  
27-144
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  LTE Networks
Viewing EPDG S2b Service Interface Properties
To view the ePDG S2b configuration details:PGW Selection 
MechanismThe ePDG service should be configured indicating preferred method of 
PGW selection, whether local configuration or DNS/AAA server based 
PGW selection. Local Configuration based PGW selection as fallback 
mechanism is default configuration behavior.
QCI QOS Mapping It indicates...

  
27-145
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  LTE Networks
Step 1Right-click the required device in the Vision client and choose Inventory.
Step 2In the Logical Inventory window, choose Logical Inventory > Context> Mobile > EPDG. The list of 
EPDG services configured in Prime Network are displayed in the content pane. 
Step 3From the EPDG node, choose S2b Service Interface. The EPDG S2b Service Interface details are 
displayed in the content pane....

  
27-146
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  LTE Networks
Monitoring Packet Data Serving Node (PDSN)
Packet Data Serving Node, or PDSN, is a component of the Code Division Multiple Access (CDMA) 
2000 mobile network. It acts as a connection point between the Radio Access Network (RAN) and IP 
Network. PDSN also manages PPP sessions between the mobile provider’s core IP network and the 
mobile node. 
In other words, it provides access to the...