Cisco Prime Nerk 43 User Guide

  
18-7
Cisco Prime Network 4.3.2 User Guide
Chapter 18      Managing Carrier Ethernet Configurations
  Viewing Spanning Tree Protocol Properties
Step 4To view the properties of an STP instance, do one of the following:
Double-click the required instance.
Click the required entry in logical inventory under the Spanning Tree Protocol branch.
Table 18-4 describes the information that is displayed in the STP Instance Information Properties 
window. STP Root Port Hyperlinked entry to the STP port in logical...

  
18-8
Cisco Prime Network 4.3.2 User Guide
Chapter 18      Managing Carrier Ethernet Configurations
  Viewing Spanning Tree Protocol Properties
Step 5To view MSTP properties, choose the required MSTP entry in logical inventory under Spanning Tree 
Protocol. 
Table 18-5 describes the information that is displayed for MSTP.
Ports Info Table
STP Port Hyperlinked entry to the STP port in physical inventory. 
Port  State STP port state: Disabled, Blocking, Listening, Learning, or Forwarding, 
Port Role Port...

  
18-9
Cisco Prime Network 4.3.2 User Guide
Chapter 18      Managing Carrier Ethernet Configurations
  Viewing Resilient Ethernet Protocol Properties (REP)
The following topics describe how to view STP properties related to: 
VLAN domain views and overlays—See Viewing STP Information in VLAN Domain Views and 
VLAN Overlays, page 18-83.
VLAN service link properties—See Viewing STP Properties for VLAN Service Links, page 18-84.
Viewing Resilient Ethernet Protocol Properties (REP)
Cisco Resilient Ethernet...

  
18-10
Cisco Prime Network 4.3.2 User Guide
Chapter 18      Managing Carrier Ethernet Configurations
  Viewing Resilient Ethernet Protocol Properties (REP)
Figure 18-4 REP in Logical Inventory 
Table 18-6 describes the information that is displayed for REP. 
Step 3To view REP segment properties, double-click the required entry in the REP Segments table. 
Figure 18-5 shows an example of REP segment properties in logical inventory.
Table 18-6 REP Properties
Field Description
Process Process name; in this...

  
18-11
Cisco Prime Network 4.3.2 User Guide
Chapter 18      Managing Carrier Ethernet Configurations
  Viewing Resilient Ethernet Protocol Properties (REP)
Figure 18-5 REP Segment Properties 
Table 18-7 describes the information that is displayed for REP segments.  

  
18-12
Cisco Prime Network 4.3.2 User Guide
Chapter 18      Managing Carrier Ethernet Configurations
  Viewing Resilient Ethernet Protocol Properties (REP)
The following topics describe how to view REP properties related to VLANs: 
VLAN domain views and overlays—See Viewing REP Information in VLAN Domain Views and 
VLAN Overlays, page 18-80.
VLAN service link properties—See Viewing REP Properties for VLAN Service Links, page 18-81.
Table 18-7 REP Segment Properties
Field Description
Segment ID Segment...

  
18-13
Cisco Prime Network 4.3.2 User Guide
Chapter 18      Managing Carrier Ethernet Configurations
  Viewing HSRP Properties
Viewing HSRP Properties
Hot Standby Router Protocol (HSRP) is a protocol that provides backup to a router in case of failure. 
Using HSRP, several routers are connected to the same Ethernet network segment and work together to 
present the appearance of a single virtual router. The routers share the same IP and MAC addresses; 
therefore in the event of failure of one router,...

  
18-14
Cisco Prime Network 4.3.2 User Guide
Chapter 18      Managing Carrier Ethernet Configurations
  Viewing Access Gateway Properties
Viewing Access Gateway Properties
In an access network, an access gateway configuration ensures loop-free connectivity in the event of 
various failures by sending statically configured bridge protocol data units (BPDUs) toward the access 
network. Using statically configured BPDUs enables the gateway device to act appropriately when 
notified of the following...

  
18-15
Cisco Prime Network 4.3.2 User Guide
Chapter 18      Managing Carrier Ethernet Configurations
  Viewing Access Gateway Properties
Figure 18-7 Access Gateway in Logical Inventory
Table 18-9 describes the information that is displayed for an access gateway.
Table 18-9 Access Gateway Properties in Logical Inventory
Field Description
Group Name Access gateway group name.
Group Type Group type: MSTAG or REPAG.
Interface Properties
Interface Hyperlink to the interface in physical inventory on which...

  
18-16
Cisco Prime Network 4.3.2 User Guide
Chapter 18      Managing Carrier Ethernet Configurations
  Viewing Access Gateway Properties
Step 3Choose an access gateway instance to view instance properties.
Figure 18-8 shows an example of the information displayed for an access gateway instance. 
Figure 18-8 Access Gateway Instance in Logical Inventory
Table 18-10 describes the information that is displayed for an access gateway instance.  Hello Time Current hello time (in seconds)
Port Active Whether...