Cisco Ise 14 User Guide
Here you can view all the pages of manual Cisco Ise 14 User Guide. The Cisco manuals for Interface are available online for free. You can easily download all the documents as PDF.
Page 61
![Page 61
Copying Startup Configuration from a Remote Location
Tocopybutdoesnotmergearemotefiletothestartupconfiguration,usethefollowingcommand:
copy[protocol://hostname/location]startup-config—Copiesbutdoesnotmergearemotefiletothestartup
configuration
Cisco Identity Services Engine CLI Reference Guide, Release 1.4
53
Cisco ISE CLI Commands in EXEC Mode
Startup configuration](http://img.usermanuals.tech/thumb/17/104723/w300_ise-14-user-guide-1524839461_d-60.png "Page 61
Copying Startup Configuration from a Remote Location
Tocopybutdoesnotmergearemotefiletothestartupconfiguration,usethefollowingcommand:
copy[protocol://hostname/location]startup-config—Copiesbutdoesnotmergearemotefiletothestartup
configuration
Cisco Identity Services Engine CLI Reference Guide, Release 1.4
53
Cisco ISE CLI Commands in EXEC Mode
Startup configuration")
Copying Startup Configuration from a Remote Location Tocopybutdoesnotmergearemotefiletothestartupconfiguration,usethefollowingcommand: copy[protocol://hostname/location]startup-config—Copiesbutdoesnotmergearemotefiletothestartup configuration Cisco Identity Services Engine CLI Reference Guide, Release 1.4 53 Cisco ISE CLI Commands in EXEC Mode Startup configuration
Page 62
![Page 62
Copying Log files
UsethefollowingcopycommandtocopylogfilesfromtheCiscoISEsystemtoanotherlocation:
copylogs[protocol://hostname/location]
Example 1
Tocopylogfilestothelocaldisk,usethefollowingcommand:
ise/admin#copylogsdisk:/Collectinglogs...ise/admin#
Example 2
Tocopylogfilestoanotherlocation,usethefollowingcommand:
ise/admin#copydisk://mybackup-100805-1910.tar.gzftp://myftpserver/mydirUsername:Password:ise/admin#
Cisco Identity Services Engine CLI Reference Guide, Release 1.4
54
Cisco ISE CLI...](http://img.usermanuals.tech/thumb/17/104723/w300_ise-14-user-guide-1524839461_d-61.png "Page 62
Copying Log files
UsethefollowingcopycommandtocopylogfilesfromtheCiscoISEsystemtoanotherlocation:
copylogs[protocol://hostname/location]
Example 1
Tocopylogfilestothelocaldisk,usethefollowingcommand:
ise/admin#copylogsdisk:/Collectinglogs...ise/admin#
Example 2
Tocopylogfilestoanotherlocation,usethefollowingcommand:
ise/admin#copydisk://mybackup-100805-1910.tar.gzftp://myftpserver/mydirUsername:Password:ise/admin#
Cisco Identity Services Engine CLI Reference Guide, Release 1.4
54
Cisco ISE CLI...")
Copying Log files UsethefollowingcopycommandtocopylogfilesfromtheCiscoISEsystemtoanotherlocation: copylogs[protocol://hostname/location] Example 1 Tocopylogfilestothelocaldisk,usethefollowingcommand: ise/admin#copylogsdisk:/Collectinglogs...ise/admin# Example 2 Tocopylogfilestoanotherlocation,usethefollowingcommand: ise/admin#copydisk://mybackup-100805-1910.tar.gzftp://myftpserver/mydirUsername:Password:ise/admin# Cisco Identity Services Engine CLI Reference Guide, Release 1.4 54 Cisco ISE CLI...
Page 63
![Page 63
crypto
Togenerateanewpublickeypair,exportthecurrentpublickeytoarepository,andimportapublickeyto
theauthorizedkeyslist,usethecryptocommandinEXECmode.Itisalsopossibletoviewthepublickey
informationanddeleteselectedkeys.
cryptokey[delete{hash|authorized_keys|rsa}]
cryptokey[export{filename|repository}]
cryptokey[generate{rsa}]
cryptokey[import{filename|repository}]
Syntax DescriptionAllowsyoutoperformcryptokeyoperations.key
Deletesapublic/privatekeypair.delete
Hashvalue.Supportsupto80characters.hash...](http://img.usermanuals.tech/thumb/17/104723/w300_ise-14-user-guide-1524839461_d-62.png "Page 63
crypto
Togenerateanewpublickeypair,exportthecurrentpublickeytoarepository,andimportapublickeyto
theauthorizedkeyslist,usethecryptocommandinEXECmode.Itisalsopossibletoviewthepublickey
informationanddeleteselectedkeys.
cryptokey[delete{hash|authorized_keys|rsa}]
cryptokey[export{filename|repository}]
cryptokey[generate{rsa}]
cryptokey[import{filename|repository}]
Syntax DescriptionAllowsyoutoperformcryptokeyoperations.key
Deletesapublic/privatekeypair.delete
Hashvalue.Supportsupto80characters.hash...")
crypto
Togenerateanewpublickeypair,exportthecurrentpublickeytoarepository,andimportapublickeyto
theauthorizedkeyslist,usethecryptocommandinEXECmode.Itisalsopossibletoviewthepublickey
informationanddeleteselectedkeys.
cryptokey[delete{hash|authorized_keys|rsa}]
cryptokey[export{filename|repository}]
cryptokey[generate{rsa}]
cryptokey[import{filename|repository}]
Syntax DescriptionAllowsyoutoperformcryptokeyoperations.key
Deletesapublic/privatekeypair.delete
Hashvalue.Supportsupto80characters.hash...
Page 64
Command DefaultNodefaultbehaviororvalues. Command ModesEXEC Usage GuidelinesTheCiscoADEOSsupportspublickeyauthenticationwithoutthepasswordforSSHaccesstoadministrators anduseridentities. Usethecryptokeygeneratersacommandtogenerateanewpublic/privatekeypairwitha2048-bitlength forthecurrentuser.Thekeyattributesarefixed,andsupportsRSAkeytypes.Ifthekeypairalreadyexists, youwillbepromptedtopermitanover-writebeforecontinuingwithapassphrase.Ifyouprovidethepassphrase,...
Page 65
Related CommandsDescriptionCommand showcrypto Cisco Identity Services Engine CLI Reference Guide, Release 1.4 57 Cisco ISE CLI Commands in EXEC Mode crypto
Page 66
![Page 66
debug
Todisplayerrorsoreventsforexecutedcommands,usethedebugcommandinEXECmode.
debug[all|application|backup-restore|cdp|config|copy|icmp|locks|logging|snmp|system|
transfer|user|utils]
Syntax DescriptionEnablesalldebugging.all
Enablesdebuggingapplicationrelatederrorsorevents.
•all—Enablesallapplicationdebugoutput.Setlevelbetween0
and7,with0beingsevereand7beingall.
•install—Enablesapplicationinstalldebugoutput.Setlevel
between0and7,with0beingsevereand7beingall....](http://img.usermanuals.tech/thumb/17/104723/w300_ise-14-user-guide-1524839461_d-65.png "Page 66
debug
Todisplayerrorsoreventsforexecutedcommands,usethedebugcommandinEXECmode.
debug[all|application|backup-restore|cdp|config|copy|icmp|locks|logging|snmp|system|
transfer|user|utils]
Syntax DescriptionEnablesalldebugging.all
Enablesdebuggingapplicationrelatederrorsorevents.
•all—Enablesallapplicationdebugoutput.Setlevelbetween0
and7,with0beingsevereand7beingall.
•install—Enablesapplicationinstalldebugoutput.Setlevel
between0and7,with0beingsevereand7beingall....")
debug Todisplayerrorsoreventsforexecutedcommands,usethedebugcommandinEXECmode. debug[all|application|backup-restore|cdp|config|copy|icmp|locks|logging|snmp|system| transfer|user|utils] Syntax DescriptionEnablesalldebugging.all Enablesdebuggingapplicationrelatederrorsorevents. •all—Enablesallapplicationdebugoutput.Setlevelbetween0 and7,with0beingsevereand7beingall. •install—Enablesapplicationinstalldebugoutput.Setlevel between0and7,with0beingsevereand7beingall....
Page 67
EnablesdebuggingCiscoDiscoveryProtocolconfigurationrelated errorsorevents. •all—EnablesallCiscoDiscoveryProtocolconfigurationdebug output.Setlevelbetween0and7,with0beingsevereand7 beingall. •config—EnablesconfigurationdebugoutputforCiscoDiscovery Protocol.Setlevelbetween0and7,with0beingsevereand7 beingall. •infra—EnablesinfrastructuredebugoutputforCiscoDiscovery Protocol.Setlevelbetween0and7,with0beingsevereand7 beingall. cdp EnablesdebuggingtheCiscoISEconfigurationrelatederrorsor events....
Page 68
Enablesdebuggingresourcelockingrelatederrorsorevents. •all—Enablesallresourcelockingdebugoutput.Setlevel between0and7,with0beingsevereand7beingall. •file—Enablesfilelockingdebugoutput.Setlevelbetween0 and7,with0beingsevereand7beingall. locks Enablesdebuggingloggingconfigurationrelatederrorsorevents. all—Enablesallloggingconfigurationdebugoutput.Setlevelbetween 0and7,with0beingsevereand7beingall. logging EnablesdebuggingSNMPconfigurationrelatederrorsorevents....
Page 69
![Page 69
Command ModesEXEC
Usage GuidelinesUsethedebugcommandtodisplayvariouserrorsoreventsintheCiscoISEserver,suchassetupor
configurationfailures.
Example
ise/admin#debugallise/admin#mkdirdisk:/1ise/admin#6[15347]:utils:vsh_root_stubs.c[2742][admin]:mkdiroperationsuccessise/admin#rmdirdisk:/16[15351]:utils:vsh_root_stubs.c[2601][admin]:InvokedRemoveDirectorydisk:/1command6[15351]:utils:vsh_root_stubs.c[2663][admin]:RemoveDirectoryoperationsuccessise/admin#ise/admin#undebugallise/admin#
Related...](http://img.usermanuals.tech/thumb/17/104723/w300_ise-14-user-guide-1524839461_d-68.png "Page 69
Command ModesEXEC
Usage GuidelinesUsethedebugcommandtodisplayvariouserrorsoreventsintheCiscoISEserver,suchassetupor
configurationfailures.
Example
ise/admin#debugallise/admin#mkdirdisk:/1ise/admin#6[15347]:utils:vsh_root_stubs.c[2742][admin]:mkdiroperationsuccessise/admin#rmdirdisk:/16[15351]:utils:vsh_root_stubs.c[2601][admin]:InvokedRemoveDirectorydisk:/1command6[15351]:utils:vsh_root_stubs.c[2663][admin]:RemoveDirectoryoperationsuccessise/admin#ise/admin#undebugallise/admin#
Related...")
Command ModesEXEC Usage GuidelinesUsethedebugcommandtodisplayvariouserrorsoreventsintheCiscoISEserver,suchassetupor configurationfailures. Example ise/admin#debugallise/admin#mkdirdisk:/1ise/admin#6[15347]:utils:vsh_root_stubs.c[2742][admin]:mkdiroperationsuccessise/admin#rmdirdisk:/16[15351]:utils:vsh_root_stubs.c[2601][admin]:InvokedRemoveDirectorydisk:/1command6[15351]:utils:vsh_root_stubs.c[2663][admin]:RemoveDirectoryoperationsuccessise/admin#ise/admin#undebugallise/admin# Related...
Page 70
![Page 70
delete
TodeleteafilefromtheCiscoISEserver,usethedeletecommandinEXECmode.Toremovedeletingfiles
fromtheCiscoISEserver,usethenoformofthiscommand.
delete[filenamedisk:/path]
Syntax DescriptionFilename.Supportsupto80alphanumericcharacters.filename
Locationofthefileintherepository.disk:/path
Command DefaultNodefaultbehaviororvalues.
Command ModesEXEC
Usage GuidelinesIfyouattempttodeleteaconfigurationfileorimage,thesystempromptsyoutoconfirmthedeletion.Also,...](http://img.usermanuals.tech/thumb/17/104723/w300_ise-14-user-guide-1524839461_d-69.png "Page 70
delete
TodeleteafilefromtheCiscoISEserver,usethedeletecommandinEXECmode.Toremovedeletingfiles
fromtheCiscoISEserver,usethenoformofthiscommand.
delete[filenamedisk:/path]
Syntax DescriptionFilename.Supportsupto80alphanumericcharacters.filename
Locationofthefileintherepository.disk:/path
Command DefaultNodefaultbehaviororvalues.
Command ModesEXEC
Usage GuidelinesIfyouattempttodeleteaconfigurationfileorimage,thesystempromptsyoutoconfirmthedeletion.Also,...")
delete TodeleteafilefromtheCiscoISEserver,usethedeletecommandinEXECmode.Toremovedeletingfiles fromtheCiscoISEserver,usethenoformofthiscommand. delete[filenamedisk:/path] Syntax DescriptionFilename.Supportsupto80alphanumericcharacters.filename Locationofthefileintherepository.disk:/path Command DefaultNodefaultbehaviororvalues. Command ModesEXEC Usage GuidelinesIfyouattempttodeleteaconfigurationfileorimage,thesystempromptsyoutoconfirmthedeletion.Also,...