Cisco Ise 14 User Guide

repository
Toentertherepositorysubmodeforconfigurationofbackups,usetherepositorycommandinconfiguration
mode.
repositoryrepository-name
Syntax DescriptionNameofrepository.Supportsupto80alphanumericcharacters.repository-name
Afteryouenterthenameoftherepositoryintherepositorycommand,youentertheconfig-Repository
configurationsubmode(seetheSyntaxDescription).
Note
Syntax DescriptionEXECcommand.AllowsyoutoperformanyoftheEXECcommands
inthismode.
do
Exitstheconfig-RepositorysubmodeandreturnsyoutoEXECmode.end...

Table 8: Table 4-5 URL Keywords (Continued)
Source of DestinationKeyword
EntertherepositoryURL,includingserverandpathinformation.
Supportsupto80alphanumericcharacters.
URL
LocalCD-ROMdrive(readonly).cdrom:
Localstorage.
Youcanruntheshowrepositoryrepository_nametoviewallfiles
inthelocalrepository.
Alllocalrepositoriesarecreatedonthe/localdiskpartition.
Whenyouspecifydisk://intherepositoryURL,thesystem
createsdirectoriesinapaththatisrelativeto/localdisk.For
example,ifyouentereddisk://backup,thedirectoryis...

CiscoISEdisplaysthefollowingwarningwhenyouconfigureasecureftprepositoryintheCiscoISEAdmin
portalinAdministration>System>Maintenance>Repository>AddRepository.
ThehostkeyoftheSFTPservermustbeaddedthroughtheCLIbyusingthehost-keyoptionbeforethis
repositorycanbeused.
AcorrespondingerroristhrownintheCiscoADElogswhenyoutrytobackupintoasecureFTPrepository
withoutconfiguringthehost-key.
Related CommandsDescriptionCommand
backup
restore
showbackup
showrepository
Cisco Identity Services Engine CLI Reference Guide,...

service
Tospecifyaservicetomanage,usetheservicecommandinconfigurationmode.
servicesshd
Todisablethisfunction,usethenoformofthiscommand.
noservice
Syntax DescriptionSecureShellDaemon.ThedaemonprogramforSSH.sshd
Enablessshdservice.enable
Specifiesallowablekeyexchangealgorithmsforsshdservice.key-exchange-algorithm
Restrictskeyexchangealgorithmtodiffie-hellman-group14-sha1diffie-hellman-group14-sha1
Specifiestheloglevelofmessagesfromsshdtosecuresystemlog.
•1—QUIET
•2—FATAL
•3—ERROR
•4—INFO(default)...

ise/admin(config)#servicesshdloglevel4ise/admin(config)#
Cisco Identity Services Engine CLI Reference Guide, Release 1.4    
217
Cisco ISE CLI Commands in Configuration Mode
service 

shutdown
Toshutdownaninterface,usetheshutdowncommandintheinterfaceconfigurationmode.Todisablethis
function,usethenoformofthiscommand.
Thiscommandhasnokeywordsandarguments.
Command DefaultNodefaultbehaviororvalues.
Command ModesConfiguration(config-GigabitEthernet)#
Usage GuidelinesWhenyoushutdownaninterfaceusingthiscommand,youloseconnectivitytotheCiscoISEappliance
throughthatinterface(eventhoughtheapplianceisstillpoweredon)....

snmp-server community
TosetupthecommunityaccessstringtopermitaccesstotheSimpleNetworkManagementProtocol(SNMP),
usethesnmp-servercommunitycommandinconfigurationmode.
snmp-servercommunitycommunity-stringro
Todisablethisfunction,usethenoformofthiscommand.
nosnmp-server
Syntax DescriptionSetsSNMPcommunitystring.community
Accessingstringthatfunctionsmuchlikeapasswordandallows
accesstoSNMP.Noblankspacesallowed.Supportsupto255
alphanumericcharacters.
community-string
Specifiesread-onlyaccess.ro
Command...

•DISMAN-EVENT-MIB
•NOTIFICATION-LOG-MIB
•CISCO-CDP-MIB
Example
ise/admin(config)#snmp-servercommunitynewroise/admin(config)#
Related CommandsDescriptionCommand
snmp-serverlocation
snmp-servercontact
   Cisco Identity Services Engine CLI Reference Guide, Release 1.4
220
Cisco ISE CLI Commands in Configuration Mode
snmp-server community 

snmp-server contact
ToconfiguretheSNMPcontactManagementInformationBase(MIB)valueonthesystem,usethesnmp-server
contactcommandinconfigurationmode.Toremovethesystemcontactinformation,usethenoformofthis
command.
snmp-servercontactcontact-name
Syntax DescriptionIdentifiesthecontactpersonforthismanagednode.Supportsupto
255alphanumericcharacters.
contact
Stringthatdescribesthesystemcontactinformationofthenode.
Supportsupto255alphanumericcharacters.
contact-name
Command DefaultNodefaultbehaviororvalues.
Command...

snmp-server location
ToconfiguretheSNMPlocationMIBvalueonthesystem,usethesnmp-serverlocationcommandin
configurationmode.Toremovethesystemlocationinformation,usethenoformofthiscommand.
snmp-serverlocationlocation
Syntax DescriptionConfiguresthephysicallocationofthismanagednode.Supportsup
to255alphanumericcharacters.
location
Stringthatdescribesthephysicallocationinformationofthesystem.
Supportsupto255alphanumericcharacters.
location
Command DefaultNodefaultbehaviororvalues.
Command...