Cisco Dpq3925x User Manual

4021193 Rev C  31 
 
 How Do I Maintain the Battery? 
 
Location of Battery 
As shown in the following illustrations, the battery compartment is located on the 
right side panel for both DPQ3925 housing types. 
 
Housing Type 1  
Housing Type 2  
Before Removing and Replacing the Battery 
Before removing and replacing the battery, refer to the following important 
information.  
 You can remove and replace the battery without disconnecting the AC power 
source. 
 It may take as long as 24 hours for...

32  4021193 Rev C 
 
How Do I Configure My DOCSIS Residential Gateway? 
 
How Do I Configure My DOCSIS Residential Gateway? 
To configure your residential gateway, you must first access the WebWizard 
configuration pages. This section provides detailed instructions and procedures for 
accessing the WebWizard pages and for configuring your residential gateway to 
operate correctly. This section also presents examples and descriptions of each 
WebWizard configuration page. Use the WebWizard pages to...

4021193 Rev C  33 
 
 How Do I Configure My DOCSIS Residential Gateway? 
 
2 In the address field, enter the following IP address:  192.168.0.1. A Status DOCSIS 
WAN login page similar to the following page opens.  
 
3 On the Status DOCSIS WAN page, leave the User Name and Password field 
blank and click Log In. The gateway opens with an Administration Management 
page in the forefront. You can use the Administration Management page to 
change your User Name and Password. 
At this point you are logged...

34  4021193 Rev C 
 
How Do I Configure My DOCSIS Residential Gateway? 
 
 
 
4 On the Administration Management page, create a User Name and Password 
and then click Save Settings. Once you save the settings for your User Name and 
Password on the Administration Management page, the Setup Quick Setup page 
opens. 
Important: You have the option to leave the password field blank (factory 
default). However, if you do not change your User Name and Password, you 
will be directed to the Administrative...

4021193 Rev C  35 
 
 How Do I Configure My DOCSIS Residential Gateway? 
 
  
Configuring Quick Settings 
Use the descriptions and instructions in the following table to configure the network 
settings for the device. After you make your selections, click Save Settings to apply 
your changes or click Cancel Changes to cancel. 
Section Field Description 
Change Password User Name  
Displays the user name for the operator currently logged in 
Change Password to  
Allows you to change your password...

36  4021193 Rev C 
 
How Do I Configure My DOCSIS Residential Gateway? 
 
Section Field Description 
WLAN Wireless Network  
Allows you to enable or disable the wireless network. Select the 
desired option: 
 Enable 
 Disable  
Wireless Network Name (SSID)  
Allows you to enter a name for your wireless network or to use the 
default value. The value you enter he will be viewable on PCs and 
other wireless client devices such as the wireless network name. 
Note: The factory default Service Set...

4021193 Rev C  37 
 
 How Do I Configure My DOCSIS Residential Gateway? 
 
Setup > Lan Setup 
The Setup Lan Setup page allows you to configure the settings for the Local Area 
Network (LAN) in your home. These settings include the range of IP addresses that 
define the LAN itself as well as how the addresses are assigned (automatically by 
DHCP or manually) as new devices are added to the network. 
Important: Unless you are knowledgeable about administering IP addresses, we 
recommend that you do not...

38  4021193 Rev C 
 
How Do I Configure My DOCSIS Residential Gateway? 
 
Section Field Description 
Network Address 
Server Settings 
(DHCP) 
DHCP Server 
Allows you to enable or disable the DHCP server in the 
residential gateway. The DHCP server is used to automatically 
allocate IP addresses to devices as they are attached to your home 
network. 
 Connected Devices Summary page 
Click Connected Devices Summary in the Lan Setup page. The 
Connected Devices Summary page opens. This page is a pop-up...

4021193 Rev C  39 
 
 How Do I Configure My DOCSIS Residential Gateway? 
 
Section Field Description 
 Maximum Number of DHCP Users  
Enter the maximum number of users to which the DHCP server 
can assign IP addresses for use in the LAN. This number cannot 
be greater than 254 minus the starting IP address described 
above. 
Client Lease Time  
The Client Lease Time is the amount of time an IP address is 
valid. IP address leases are renewed automatically by your PC 
and other devices that use DHCP to...

40  4021193 Rev C 
 
How Do I Configure My DOCSIS Residential Gateway? 
 
 
Section Field Description 
DDNS 
Service 
Disabling DDNS (Factory Default Settings) 
To disable DDNS, select Disabled from the drop-down list and click Save 
Settings. 
 
Enabling DDNS 
Note: In order to use the DDNS feature, you must first set up an account and 
establish a URL with www.DynDNS.org. The DDNS feature will not work 
without a valid account. 
To set up a DDNS account, open your browser and enter www.DynDNS.org 
in...