Cisco 881w Manual

 
1-41
Cisco Integrated Services Router Hardware Installation Guide
 
Chapter 1      Product Overview
  Cisco 810 Series
Figure 1-10 12-in-1 Serial Port
Power Supply
All SKUs require a 5 VDC power source. Cisco 819HG and Cisco 819G ISRs have a self-locking Molex 
mini-fit connector. Cisco 819HGW and Cisco 819HWD ISRs use a 5.5 mm barrel-type connector with 
separate locking clip. An external AC power adapter is supported by default. The optional external power 
adapters are available to support a variety...

 
1-42
Cisco Integrated Services Router Hardware Installation Guide
 
Chapter 1      Product Overview
  Cisco 860, 880, 890 Series

The vehicle power adapters may be used for fixed or mobile installations. They do not provide electrical 
isolation; the input negative is connected to the output negative (chassis ground). Input cable is 350 
millimeter long with stripped and tinned bare wire connections. The input positive connection is a white 
wire and the input negative is a black wire.
Railway Power...

 
1-43
Cisco Integrated Services Router Hardware Installation Guide
 
Chapter 1      Product Overview
  Cisco 860, 880, 890 Series
NoteSome illustrations in this document show a wireless router. Both wireless and nonwireless models are 
available in the Cisco 860 series, Cisco 880 series, and Cisco 890 series ISRs. Port and feature locations 
are similar for both wireless and nonwireless routers.
NoteThroughout this document the term VDSL refers to support for VDSL2 (ITU G.993.2) and ADSL refers 
to...

 
1-44
Cisco Integrated Services Router Hardware Installation Guide
 
Chapter 1      Product Overview
  Cisco 860, 880, 890 Series
Figure 1-7 shows the front panel details of the Cisco 860 wireless router.
Figure 1-11 Front Panel of the Cisco 860 Series Wireless ISR
Figure 1-12 shows the back panel details of the Cisco 861 wireless (861W) ISR. Nonwireless routers do 
not have antennas on the back panel. However, the feature locations are similar for all Cisco 860 series 
routers.
Figure 1-12 Back Panel...

 
1-45
Cisco Integrated Services Router Hardware Installation Guide
 
Chapter 1      Product Overview
  Cisco 860, 880, 890 Series
Cisco 860VAE Series ISRs
The Cisco 860VAE series ISRs are fixed-configuration data routers. This section describes the features 
of the products in this series.
Interfaces
Ta b l e 1 - 2 0 describes the interfaces of the Cisco 860VAE series routers.
NoteThe Cisco 866VAE, 867VAE, 866VAE-K9, and 867VAE-K9 routers each have two WAN ports. Only one 
of the two ports can be active...

 
1-46
Cisco Integrated Services Router Hardware Installation Guide
 
Chapter 1      Product Overview
  Cisco 860, 880, 890 Series
IOS Images
Ta b l e 1 - 2 2 describes the IOS images included in Cisco 860VAE series routers.
Ta b l e 1 - 2 3 describes the IOS images included in C860VAE series routers. 
Figure 1-13 shows the front panel details of the Cisco 866VAE, Cisco 867VAE, Cisco 866VAE-K9, and 
Cisco 867VAE-K9 integrated services routers (ISRs).
Figure 1-13 Front Panel of the Cisco 860VAE series ISR...

 
1-47
Cisco Integrated Services Router Hardware Installation Guide
 
Chapter 1      Product Overview
  Cisco 860, 880, 890 Series
Figure 1-14 shows the front panel details of the C867VAE, C866VAE-K9, and C867VAE-K9 integrated 
services routers (ISRs). 
Figure 1-14 Front Panel of the C860VAE series ISR 
Figure 1-15 shows the back panel details of the Cisco 866VAE ISR.
Figure 1-15 Back Panel of the Cisco 866VAE ISR
1LEDs 
246199
Cisco 860 Series
1
1xDSL port1 
1. Using RJ-11.
6On/Off switch 
2GE WAN...

 
1-48
Cisco Integrated Services Router Hardware Installation Guide
 
Chapter 1      Product Overview
  Cisco 860, 880, 890 Series
Figure 1-16 shows the back panel details of the C867VAE ISR. 
Figure 1-16 Back Panel of the C867VAE ISR 
Figure 1-17 shows the back panel details of the Cisco 867VAE-K9.
Figure 1-17 Back Panel of the Cisco 867VAE-K9 ISR
1xDSL port1 
1. Using RJ-11.
6On/Off switch
2GE WAN interface 7Power connector
3Ethernet LAN GE and FE interfaces (GE0, 
GE1 interfaces and FE0 through FE2...

 
1-49
Cisco Integrated Services Router Hardware Installation Guide
 
Chapter 1      Product Overview
  Cisco 860, 880, 890 Series
Figure 1-18 shows the back panel details of the C866VAE-K9. 
Figure 1-18 Back Panel of the C866VAE-K9 ISR 
Figure 1-19 shows the back panel details of the C867VAE-K9. 
Figure 1-19 Back Panel of the C867VAE-K9 ISR 
1xDSL port 6On/Off switch
2GE WAN interface 7Power connector
3Ethernet LAN GE and FE interfaces (GE0, 
GE1 interfaces and FE0 through FE2 
interfaces)8Reset button...

 
1-50
Cisco Integrated Services Router Hardware Installation Guide
 
Chapter 1      Product Overview
  Cisco 860, 880, 890 Series
Cisco 860VAE-W-A-K9, Cisco 860VAE-W-E-K9, and 
Cisco 860VAE-POE-W-A-K9 ISRs
This section provides a hardware overview of the following Cisco 860VAE Series Integrated Services 
Routers (ISRs):
C866VAE-W-E-K9
C867VAE-W-A-K9
C867VAE-W-E-K9
C867VAE-POE-W-A-K9
Model-Specific Features
Ta b l e 1 - 2 4 describes the features specific to each of these router models:
Common Features...