Cisco 6500e Manual

Catalyst 6500 Series Switches Installation Guide
OL-5781-08
Appendix A      Chassis and Module Power and Heat Values
  
Ta b l e A - 1 0 lists the power and the heat numbers for the 10/100/1000 Ethernet switching modules. WS-X6748-SFP
48-Port 1000BASE-X Ethernet 
module5.32 223.44 279.30 953.81 300.32 1025.60
WS-X6816-GBIC
16-Port1000BASE-X Gigabit 
Ethernet module3.84 161.28 201.60 688.46 216.77 740.28
Table A-10 Power Requirements and Heat Dissipation—10/100/1000 Ethernet Switching Modules
Model...

A
Catalyst 6500 Series Switches Installation Guide
OL-5781-08
Appendix A      Chassis and Module Power and Heat Values
  
Ta b l e A - 1 1 lists the power and the heat numbers for the Fast Ethernet switching modules.
Ta b l e A - 1 2 lists the power and the heat numbers for the 10/100 Ethernet switching modules. WS-X6548V-GE-TX
10/100/1000 Ethernet module 
with WS-F6K-VPWR-GE PoE 
daughter card3.40 142.80 178.50 609.58 191.94 655.46
WS-X6548-GE-45AF
48-port 10/100/1000 Ethernet 
module with...

Catalyst 6500 Series Switches Installation Guide
OL-5781-08
Appendix A      Chassis and Module Power and Heat Values
  
Table A-12 Power Requirements and Heat Dissipation—10/100 Ethernet Switching Modules
Model Number/
Module TypeModule 
Current (A)Module 
Power 
(Watts)AC DC
AC-Input
Power 
(Watts)Heat Diss.
(BTU/HR)DC-Input
Power 
(Watts)Heat Diss.
(BTU/HR)
WS-X6148-RJ-21
48-port 10/100 Ethernet module2.39 100.38 125.48 428.5 134.92 460.75
WS-X6148-RJ21V
48-port 10/100 Ethernet module 
with WS-F6K-VPWR...

A
Catalyst 6500 Series Switches Installation Guide
OL-5781-08
Appendix A      Chassis and Module Power and Heat Values
  
Ta b l e A - 1 3 lists the power and the heat numbers for the 10BASE Ethernet switching modules.
Ta b l e A - 1 4 lists the power and the heat numbers for the FlexWAN and the enhanced FlexWAN modules. WS-X6348-RJ21V
48-port 10/100 Ethernet module 
with WS-F6K-VPWR PoE 
daughter card2.39 100.38 125.48 428.5 134.92 460.75
WS-X6348-RJ-45
48-port 10/100 Ethernet module2.39 100.38 125.48...

Catalyst 6500 Series Switches Installation Guide
OL-5781-08
Appendix A      Chassis and Module Power and Heat Values
  
Ta b l e A - 1 5 lists the power and the heat numbers for the available service modules.
Table A-15 Power Requirements and Heat Dissipation—Service Modules
Model Number/
Module TypeModule 
Current (A)Module 
Power 
(Watts)AC DC
AC-Input
Power 
(Watts)Heat Diss.
(BTU/HR)DC-Input
Power 
(Watts)Heat Diss.
(BTU/HR)
ACE10-6500-K9
Applications Control Engine 
(ACE) module5.23 219.66 274.58...

A
Catalyst 6500 Series Switches Installation Guide
OL-5781-08
Appendix A      Chassis and Module Power and Heat Values
  
Ta b l e A - 1 6 lists the power and the heat numbers for miscellaneous modules. WS-SVC-WLAN-1-K9
Wireless LAN Services module3.10 130.20 162.75 555.79 175.0 597.63
WS-X6066-SLB-S-K9
Content Switching module with 
SSL2.15 90.30 112.88 385.47 121.37 414.48
Table A-16 Power Requirements and Heat Dissipation—Miscellaneous Modules
Model Number/
Module TypeModule 
Current (A) 
@ 42...

A-1
Catalyst 6500 Series Switches Installation Guide
OL-5781-08
APPENDIXA
Troubleshooting
NoteThe information in this chapter applies to all Catalyst 6500 series switches unless otherwise noted.
This chapter describes how to troubleshoot the Catalyst 6500 series switch hardware installation and 
contains these sections:
Getting Started, page A-1
Solving Problems at the System Component Level, page A-2
Identifying Startup Problems, page A-3
Troubleshooting the Power Supply, page A-4
Troubleshooting the...

A-2
Catalyst 6500 Series Switches Installation Guide
OL-5781-08
Appendix A      Troubleshooting
  Solving Problems at the System Component Level
System software boots successfully.
The supervisor engine and all switching modules are installed properly in their slots, and each was 
initialized without problems.
If one or more of the above conditions are not met, use the procedures in this chapter to isolate and, if 
possible, resolve the problem. If all of the above conditions are met, and the hardware...

A-3
Catalyst 6500 Series Switches Installation Guide
OL-5781-08
Appendix A      Troubleshooting
  Identifying Startup Problems
Identifying Startup Problems
LEDs indicate all system states in the startup sequence. By checking the LEDs, you can determine when 
and where the system failed in the startup sequence.
To identify startup problems, follow these steps:
Step 1Turn on the power supplies. You should immediately hear the system fan assembly begin to operate. 
If you do not hear the fans operating, see...

A-4
Catalyst 6500 Series Switches Installation Guide
OL-5781-08
Appendix A      Troubleshooting
  Troubleshooting the Power Supply
Troubleshooting the Power Supply
If the INPUT OK LED does not light after you turn on the power switch, follow these steps to isolate a 
power subsystem problem:
Step 1Verify that the INPUT OK LED on the power supply is green.
If the INPUT OK LED is green, the AC or DC source is good and the power supply is functional.
If the INPUT OK LED is off, first ensure that the power...