Home > Cisco > Ethernet Switch > Cisco 6500e Manual

Cisco 6500e Manual

Here you can view all the pages of manual Cisco 6500e Manual. The Cisco manuals for Ethernet Switch are available online for free. You can easily download all the documents as PDF.

Page 361

A-51
Catalyst 6500 Series Switches Installation Guide
OL-5781-08
Appendix A      Power Supply Specifications
  6000 W AC-Input and DC-Input Power Supplies
Ta b l e A - 3 4 list the specifications for the 6000 W DC-input power supply. Power supply output capacity
2900 W operation (one 220 VAC source or 
two 110 VAC sources)
–25 A @ +3.3 VDC
–12 A @ +12 VDC
–63.6 A @ +42 VDC
6000 W operation (two 220 VAC sources)
–25 A @ +3.3 VDC
–12 A @ +12 VDC
–137.4 A @ +42 VDC
Output holdup time 20 ms minimum
kVA...

Page 362

A-52
Catalyst 6500 Series Switches Installation Guide
OL-5781-08
Appendix A      Power Supply Specifications
  6000 W AC-Input and DC-Input Power Supplies
Ta b l e A - 3 5 list the 6000 W AC-input and DC-input power supply LEDs and their meanings. Power supply output  The 6000 W DC-input power supply can operate at either 2800 W, 
4500 W, or 6000 W depending on the number of source DC power 
cables attached.
NoteThe 6000 W DC-input power supply is limited to 4000 W 
maximum output when it is installed in...

Page 363

A-53
Catalyst 6500 Series Switches Installation Guide
OL-5781-08
Appendix A      Power Supply Specifications
  6000 W AC-Input and DC-Input Power Supplies
6000 W Power Supply AC Power Cords
Ta b l e A - 3 6 lists the specifications for the AC power cords that are available for the 6000 W AC-input 
power supply. Included in the table are references to illustrations of the power cords.
Table A-35 6000 W AC-Input and DC-Input Power Supply LEDs
LED Meaning
INPUT OK 1, INPUT OK 2
(AC-input power supply...

Page 364

A-54
Catalyst 6500 Series Switches Installation Guide
OL-5781-08
Appendix A      Power Supply Specifications
  8700 W AC-Input Power Supply
8700 W AC-Input Power Supply
Catalyst 6500 series switch support for the 8700 W AC-input (WS-CAC-8700W-E) power supply along 
with any power supply output restrictions are listed in Ta b l e A - 3 7. 
The 8700 W AC-input power supply, shown in Figure A-18, shares a similar, but not identical, 
form-factor as the 1000 W, 1300 W, 2500 W, 3000 W, 4000 W, and 6000 W...

Page 365

A-55
Catalyst 6500 Series Switches Installation Guide
OL-5781-08
Appendix A      Power Supply Specifications
  8700 W AC-Input Power Supply
NoteBecause of the form-factor difference, when you install an 8700 W power supply in a Catalyst 6506, 
Catalyst 6509, or Catalyst 6509-NEB chassis you must relocate the system ground connection from the 
chassis ground pad connection to the two system ground studs located on the 8700 W power supply 
faceplate. Installing an 8700 W power supply in the other Catalyst...

Page 366

A-56
Catalyst 6500 Series Switches Installation Guide
OL-5781-08
Appendix A      Power Supply Specifications
  8700 W AC-Input Power Supply
AC-input current 16 A each input 
AC-input frequency 50/60 Hz (nominal) (±3% for full range)
Branch circuit requirement  Each power supply input should have its own dedicated, fused-branch 
circuit:
For North America—20 A
For International—Circuits should be sized according to local and 
national codes
All Catalyst 6500 series AC-input power supplies require...

Page 367

A-57
Catalyst 6500 Series Switches Installation Guide
OL-5781-08
Appendix A      Power Supply Specifications
  8700 W AC-Input Power Supply
Power supply output 
capacity The power supply output capacity is dependent on the number of AC 
power cords (1, 2, or 3) attached and the source AC voltage (110 VAC 
[low-line] or 220 VAC [high-line]) applied to the power supply inputs.
The 8700 W AC-input power supply is limited to reduced wattage 
ratings when it is installed in the following Catalyst 6500 series...

Page 368

A-58
Catalyst 6500 Series Switches Installation Guide
OL-5781-08
Appendix A      Power Supply Specifications
  8700 W AC-Input Power Supply
Ta b l e A - 3 9 lists the power supply LEDs and their meanings. Power supply output
2800 W operation 
–25.0 A @ +3.3 VDC
–12.0 A @ +12 VDC
–61.29 A @ +42 VDC
4200 W operation
–25.0 A @ +3.3 VDC
–12.0 A @ +12 VDC
–94.62 A @ +42 VDC
5800 W operation
–25.0 A @ +3.3 VDC
–12.0 A @ +12 VDC
–132.71A @ +42VDC
8700 W operation
–25.0 A @ +3.3 VDC
–12.0 A @ +12 VDC
–201.75A @...

Page 369

A-59
Catalyst 6500 Series Switches Installation Guide
OL-5781-08
Appendix A      Power Supply Specifications
  8700 W AC-Input Power Supply
Table A-39 8700 W AC-Input Power Supply LEDs
LED Meaning
INPUT OK 1, INPUT OK 2, 
and 
INPUT OK 3
Green—Source voltage is OK. (Input voltage is 85 VAC or greater.)
Off—Source AC voltage falls below 70 VAC, is not present, or the 
power supply is turned off.
220VAC 1, 2, and 3
Green—High-line AC is present on the respective AC inputs. (Input 
voltage is 170 VAC or...

Page 370

A-60
Catalyst 6500 Series Switches Installation Guide
OL-5781-08
Appendix A      Power Supply Specifications
  8700 W AC-Input Power Supply
Remote Power Cycling Feature
The 8700 W power supply is equipped with a remote power cycling feature that allows you to remotely 
turn on or turn off the power supply through an external relay controller box. Figure A-19 shows a 
typical remote power on/off setup. A three-position terminal block and a switch, located on the lower 
right quadrant of the power supply...
Start reading Cisco 6500e Manual

Related Manuals for Cisco 6500e Manual

All Cisco manuals