Cine Versum Cineversum Blackwing Three User Manual

  
2R599751 - Master Three User Manual
Changes
CineVERSUM provides this manual ’as is’ without warranty of any kind, either expressed or implied, including but
not limited to the implied warranties or merchantability and fitness for a particular purpose. CineVERSUM may
make improvements and/or changes to the product(s) and/or the program(s) described in this publication at any
time without notice.
This publication could contain technical inaccuracies or typographical errors. Changes are periodically made...

R599751 - Master Three User Manual3 
TABLE OF CONTENTS
1.0 GETTING STARTED ................................................................................................................... 5
1.1 Introduction ........................................................................................................................ 5
1.2 Document Conventions ..................................................................................................... 5
1.3 Unpacking and Inspection...

  
4R599751 - Master Three User Manual
Chroma Filter (Auto CUE-C) ............................................................................... 24
4.5 Configuration ................................................................................................................... 25
Test Patterns ....................................................................................................... 25
Auto Standby...

1.0  GETTING STARTED
R599751 - Master Three User Manual5 
1.0 GETTING STARTED
1.1 Introduction
Thank you for purchasing the Master Three Video processor powered by ABT. This product delivers a level of quality
among the very highest available today.
We are especially pleased to bring you ABT’s new  VRS Precision  Video Scaling II technology. This technology
enables precision up conversion of standard and high definition (480i/p, 576i/p, 720p, 1080i/p) video sources and
content to the native or optimum...

1.0  GETTING STARTED
6R599751 - Master Three User Manual
•Master Three User Manual
•Serial Cable for Software Updates and Automation (1:1)
The Master Three uses BNC-style analog connectors and a HDMI digital connector to provide video output signals.
You must purchase an output cable to connect to one of these outputs to your display. Different displays have
different input connectors, so check your display specifications to ensure compatibility.
Both input and output cables can be supplied by your...

1.0  GETTING STARTED
R599751 - Master Three User Manual7 
•Avoid excessive humidity, sudden temperature changes or temperature extremes.
•Use only accessories recommended by the manufacturer to avoid fire, shock or other hazards.
•Unplug your Master Three before cleaning. Use a damp cloth for cleaning.
Don’t ...
•Install the Master Three on an unstable surface or one that is unable to support all four of its feet, unless it is
installed in an equipment rack.
•Stack the Master Three directly above...

2.0  BASIC OPERATION
8R599751 - Master Three User Manual
2.0 BASIC OPERATION
2.1 Front Panel Overview
Status LED - This displays the current state of the Master Three:
•Off: The unit is in standby mode
•Red: No signal detected
•Blue: The unit is processing the signal
•Blinking Blue: There is a problem with HDCP authentification
•Green: The unit detects an unsupported signal
On/Standby - This toggles unit power between On and Standby.
IR sensor - This is where all IR commands are received by the Master...

2.0  BASIC OPERATION
R599751 - Master Three User Manual9 
•RGBHV/Component (480p, 576p, 720p@50/60Hz, 1080i@50/60Hz, VGA/SVGA/XGA/SXGA@60Hz)
•HDMI 1 (480i/p, 576i/p, 720p@50/60Hz, 1080i@50/60Hz 1080p@24/25/50/60Hz, VGA/SVGA/XGA/
SXGA@60Hz)
•HDMI 2 (480i/p, 576i/p, 720p@50/60Hz, 1080i@50/60Hz 1080p@24/25/50/60Hz, VGA/SVGA/XGA/
SXGA@60Hz)
•HDMI 3 (480i/p, 576i/p, 720p@50/60Hz, 1080i@50/60Hz 1080p@24/25/50/60Hz, VGA/SVGA/XGA/
SXGA@60Hz)
•HDMI 4 (480i/p, 576i/p, 720p@50/60Hz, 1080i@50/60Hz...

2.0  BASIC OPERATION
10 R599751 - Master Three User Manual
3) Plug the small connector attached to the cable that comes out of the power supply into the ‘DC In’ port on the
back of the Master Three. The Master Three should power on and display ‘CineVERSUM Powered by ABT’ on the
FPD for a couple of seconds.
2.3 Remote Control Overview
The functions of these buttons are detailed in the next paragraph. An asterisk (*) indicates this feature will be
implemented in future software.
Power/Standby Buttons
The...